Just to make things clearer and reduce the size of this monstrosity.
v2: make sure 8xx PLL update function calls update_lvds too (Daniel)
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
danvet: fixed patch ordering to avoid breaking bisect.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 106 ++++++++++++++++++---------------
1 files changed, 58 insertions(+), 48 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a7c2ddc..d6a394f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5134,6 +5134,62 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
}
}
+static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 temp, lvds_sync = 0;
+
+ temp = I915_READ(LVDS);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (pipe == 1) {
+ temp |= LVDS_PIPEB_SELECT;
+ } else {
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock->p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+ /* set the dithering flag on LVDS as needed */
+ if (INTEL_INFO(dev)->gen >= 4) {
+ if (dev_priv->lvds_dither)
+ temp |= LVDS_ENABLE_DITHER;
+ else
+ temp &= ~LVDS_ENABLE_DITHER;
+ }
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ lvds_sync |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ lvds_sync |= LVDS_VSYNC_POLARITY;
+ if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+ != lvds_sync) {
+ char flags[2] = "-+";
+ DRM_INFO("Changing LVDS panel from "
+ "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+ flags[!(temp & LVDS_HSYNC_POLARITY)],
+ flags[!(temp & LVDS_VSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ temp |= lvds_sync;
+ }
+ I915_WRITE(LVDS, temp);
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -5155,7 +5211,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
const intel_limit_t *limit;
int ret;
u32 temp;
- u32 lvds_sync = 0;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
if (encoder->base.crtc != crtc)
@@ -5341,53 +5396,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
* This is an exception to the general rule that mode_set doesn't turn
* things on.
*/
- if (is_lvds) {
- temp = I915_READ(LVDS);
- temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- temp |= LVDS_PIPEB_SELECT;
- } else {
- temp &= ~LVDS_PIPEB_SELECT;
- }
- /* set the corresponsding LVDS_BORDER bit */
- temp |= dev_priv->lvds_border_bits;
- /* Set the B0-B3 data pairs corresponding to whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- if (clock.p2 == 7)
- temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
- else
- temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more thoroughly into how
- * panels behave in the two modes.
- */
- /* set the dithering flag on LVDS as needed */
- if (INTEL_INFO(dev)->gen >= 4) {
- if (dev_priv->lvds_dither)
- temp |= LVDS_ENABLE_DITHER;
- else
- temp &= ~LVDS_ENABLE_DITHER;
- }
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- lvds_sync |= LVDS_HSYNC_POLARITY;
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- lvds_sync |= LVDS_VSYNC_POLARITY;
- if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
- != lvds_sync) {
- char flags[2] = "-+";
- DRM_INFO("Changing LVDS panel from "
- "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
- flags[!(temp & LVDS_HSYNC_POLARITY)],
- flags[!(temp & LVDS_VSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
- temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
- temp |= lvds_sync;
- }
- I915_WRITE(LVDS, temp);
- }
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ intel_update_lvds(crtc, &clock, adjusted_mode);
if (is_dp) {
intel_dp_set_m_n(crtc, mode, adjusted_mode);
--
1.7.9.1
