In order not to inflate gen9 rc6 enabling sequence with
gen11 specifics, use a separate function for it.
Signed-off-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>
Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 72 +++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index bba477e62a12..43ec0fb4c197 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -7120,6 +7120,76 @@ static void gen9_enable_rps(struct drm_i915_private *dev_priv)
intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
}
+static void gen11_enable_rc6(struct drm_i915_private *dev_priv)
+{
+ struct intel_engine_cs *engine;
+ enum intel_engine_id id;
+
+ /* 1a: Software RC state - RC0 */
+ I915_WRITE(GEN6_RC_STATE, 0);
+
+ /* 1b: Get forcewake during program sequence. Although the driver
+ * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
+ intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
+
+ /* 2a: Disable RC states. */
+ I915_WRITE(GEN6_RC_CONTROL, 0);
+
+ /* 2b: Program RC6 thresholds.*/
+ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16 | 85);
+ I915_WRITE(GEN10_MEDIA_WAKE_RATE_LIMIT, 150);
+
+ I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
+ I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
+ for_each_engine(engine, dev_priv, id)
+ I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
+
+ if (HAS_GUC(dev_priv))
+ I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA);
+
+ I915_WRITE(GEN6_RC_SLEEP, 0);
+
+ /*
+ * 2c: Program Coarse Power Gating Policies.
+ *
+ * Bspec's guidance is to use 25us (really 25 * 1280ns) here. What we
+ * use instead is a more conservative estimate for the maximum time
+ * it takes us to service a CS interrupt and submit a new ELSP - that
+ * is the time which the GPU is idle waiting for the CPU to select the
+ * next request to execute. If the idle hysteresis is less than that
+ * interrupt service latency, the hardware will automatically gate
+ * the power well and we will then incur the wake up cost on top of
+ * the service latency. A similar guide from intel_pstate is that we
+ * do not want the enable hysteresis to less than the wakeup latency.
+ *
+ * igt/gem_exec_nop/sequential provides a rough estimate for the
+ * service latency, and puts it around 10us for Broadwell (and other
+ * big core) and around 40us for Broxton (and other low power cores).
+ * [Note that for legacy ringbuffer submission, this is less than 1us!]
+ * However, the wakeup latency on Broxton is closer to 100us. To be
+ * conservative, we have to factor in a context switch on top (due
+ * to ksoftirqd).
+ */
+ I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250);
+ I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 250);
+
+ /* 3a: Enable RC6 */
+ I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */
+
+ I915_WRITE(GEN6_RC_CONTROL,
+ GEN6_RC_CTL_HW_ENABLE |
+ GEN6_RC_CTL_RC6_ENABLE |
+ GEN6_RC_CTL_EI_MODE(1));
+
+ /*
+ * 3b: Enable Coarse Power Gating only when RC6 is enabled.
+ */
+ I915_WRITE(GEN9_PG_ENABLE,
+ GEN9_RENDER_PG_ENABLE | GEN9_MEDIA_PG_ENABLE);
+
+ intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
+}
+
static void gen9_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
@@ -8596,6 +8666,8 @@ static void intel_enable_rc6(struct drm_i915_private *dev_priv)
cherryview_enable_rc6(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_enable_rc6(dev_priv);
+ else if (INTEL_GEN(dev_priv) >= 11)
+ gen11_enable_rc6(dev_priv);
else if (INTEL_GEN(dev_priv) >= 9)
gen9_enable_rc6(dev_priv);
else if (IS_BROADWELL(dev_priv))
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
