On Tue, Jun 26, 2012 at 10:05:26PM +0200, Daniel Vetter wrote: > On Tue, Jun 26, 2012 at 03:08:32PM -0400, Giacomo Comes wrote: > > I have a dell latitude E6420 with Sandybridge Mobile (GT2). > > Since I got it (about one year ago), it has been a nightmare to run linux on it. > > At the beginning I installed openSUSE 11.4 (kernel 2.6.37.6) and the laptop > > would freeze almost immediately. After that I waited for newer kernels in order to > > see if things would improve. They did improve indeed and finally with kernel 3.0 > > I was able to run linux (openSUSE 11.4) without laptop freeze or screen issue. > > Unfortunately, the only kernel that works with my laptop is 3.0. Newer kernel > > (3.1, 3.2, 3.3 and 3.4) do not work. > > This is what happen if I run kernel 2.6.39, 3.1, 3.2, 3.3 and 3.4: > > The laptop boot and does the boot process fine. At the end of the boot process X > > starts and here the problem appears (about 50% of the times): > > the screen goes black on the left side (about 2/3 of the whole screen) with white > > stripes to the right side (the remaining 1/3). > > The laptop is not dead: I can remotely login or I can perform a clean shutdown > > if I press the power button, but the screen is totally dead. > > Another strange issue is that after a bad boot (with the black screen) at the > > next reboot the screen will start to flicker. The flickering will last some time > > and it will become less intense as the time goes until it will disappear completely. > > The funny thing is that the intensity of flicker depends on how long I keep the > > black screen. If, after the boot process, the black screen appears and I reboot > > the laptop immediately, then the flicked is moderate and it disappear after > > 1 or 2 minutes. If I keep the black screen for 1 minute or more, then after the > > reboot the flicker is very intense and it takes much more to fade. > > > > Right now I run openSUSE 12.1 on the laptop, but I had to perform the following > > trick: because openSUSE 12.1 ships with kernel 3.1, in order to make openSUSE run on my > > laptop I have the options: > > 1) downgrade to kernel 3.0 (I use 3.0.7) > > 2) recompile the openSUSE kernel 3.1 replacing the directory drivers/gpu/drm/i915 > > with the content of the same directory from kernel 3.0 source tree. > > > > I choose the second option as I can run the latest openSUSE kernel with patches > > and fixes. > > > > I have searched google to see if other users have my same problem and > > I have found few references to a problem similar to mine: > > > > http://lists.freedesktop.org/archives/intel-gfx/2011-March/009822.html > > http://www.gossamer-threads.com/lists/linux/kernel/1474140 > > https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/794474 > > > > But in none there is a mention on how to fix the problem. > > > > Is there any chance to improve the intel kernel driver to make it work > > for my laptop as it was in kernel 3.0? > > Sure, we're always working to fix odd bugs ;-) > > > I can provide any information/testing as needed. > > A few things for you to do, pretty much random order: > - Can you try out the latest drm-intel-next-queued branch from the > drm-intel git repo at: > > http://cgit.freedesktop.org/~danvet/drm-intel > > This is the basic step to ensure that we haven't fixed your bug already > in the latest code. May be I did something wrong, but in the git repo at http://cgit.freedesktop.org/~danvet/drm-intel I only see the branch drm-intel-testing and no drm-intel-next-queued. > - Please attach xrandr --verbos and full dmesg when booting with > drm.debug=0xe (take a working kernel, doesn't matter that much). See attachments > - If you can, please bisect which commit exactly introduced the regression > betwen 3.0 and 3.1. That usually helps a _lot_ in tracking down these > bugs. 1519b9956eb4b4180fa3f47c73341463cdcfaa37 is the first bad commit commit 1519b9956eb4b4180fa3f47c73341463cdcfaa37 Author: Keith Packard <keithp at keithp.com> Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths CPT pipe select is different from previous generations (using two bits instead of one). All of the paths from intel_disable_pch_ports were not making this distinction. Mode setting with pipe A turned off would then also force all outputs on pipe B to get turned off as the disable code would mistakenly decide that all of these outputs were on pipe A and turn them off. This is an extension of the CPT DP disable fix (why didn't I fix this then?) Signed-off-by: Keith Packard <keithp at keithp.com> Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org> Giacomo -------------- next part -------------- Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192 LVDS1 connected 1600x900+0+0 (0x49) normal (normal left inverted right x axis y axis) 310mm x 174mm Identifier: 0x41 Timestamp: 48029 Subpixel: horizontal rgb Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: EDID: 00ffffffffffff004ca34b5400000000 00140104901f11780a4bc59c57548c27 17505400000001010101010101010101 0101010101018e2c40bc61841e303020 250036ae1000001af11c408861841e30 3020250036ae1000001a000000fe004d 4a313534803134304b540a2000000000 00004101980000000002010a2020001d BACKLIGHT: 15 (0x0000000f) range: (0,15) Backlight: 15 (0x0000000f) range: (0,15) scaling mode: Full aspect supported: None Full Center Full aspect 1600x900 (0x49) 114.1MHz +HSync -VSync *current +preferred h: width 1600 start 1648 end 1680 total 2044 skew 0 clock 55.8KHz v: height 900 start 902 end 907 total 930 clock 60.0Hz 1600x900 (0x4a) 74.1MHz +HSync -VSync h: width 1600 start 1648 end 1680 total 1992 skew 0 clock 37.2KHz v: height 900 start 902 end 907 total 930 clock 40.0Hz 1024x768 (0x4b) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x4c) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x4d) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x4e) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz VGA1 disconnected (normal left inverted right x axis y axis) Identifier: 0x42 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: HDMI1 disconnected (normal left inverted right x axis y axis) Identifier: 0x43 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on DP1 disconnected (normal left inverted right x axis y axis) Identifier: 0x44 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on HDMI2 disconnected (normal left inverted right x axis y axis) Identifier: 0x45 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on HDMI3 disconnected (normal left inverted right x axis y axis) Identifier: 0x46 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on DP2 disconnected (normal left inverted right x axis y axis) Identifier: 0x47 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on DP3 disconnected (normal left inverted right x axis y axis) Identifier: 0x48 Timestamp: 48029 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: off auto on -------------- next part -------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.10-1.13-default (geeko at buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP Tue Jun 12 13:11:31 UTC 2012 (44a489e) [ 0.000000] Command line: root=/dev/system/root resume=/dev/system/swap splash=verbose quiet systemd.sysv_console=1 video=-16 vga=0x317 drm.debug=0xe [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable) [ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 0000000078a71000 (usable) [ 0.000000] BIOS-e820: 0000000078a71000 - 0000000078ab5000 (reserved) [ 0.000000] BIOS-e820: 0000000078ab5000 - 0000000078db7000 (usable) [ 0.000000] BIOS-e820: 0000000078db7000 - 0000000078de7000 (reserved) [ 0.000000] BIOS-e820: 0000000078de7000 - 0000000078fe7000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000078fe7000 - 0000000078fff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000078fff000 - 0000000079000000 (usable) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000100600000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Latitude E6420/0K0DNP, BIOS A02 04/13/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x100600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07C000000 mask FFC000000 uncachable [ 0.000000] 2 base 07A000000 mask FFE000000 uncachable [ 0.000000] 3 base 079000000 mask FFF000000 uncachable [ 0.000000] 4 base 100000000 mask FFF800000 write-back [ 0.000000] 5 base 100600000 mask FFFE00000 uncachable [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x79000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f1c80] f1c80 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000079000000 [ 0.000000] 0000000000 - 0079000000 page 2M [ 0.000000] kernel direct mapping tables up to 79000000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000100600000 [ 0.000000] 0100000000 - 0100600000 page 2M [ 0.000000] kernel direct mapping tables up to 100600000 @ 78db1000-78db7000 [ 0.000000] RAMDISK: 1f355000 - 1fff0000 [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0000000078ffde18 0006C (v01 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 0000000078f87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x78FE4E40/0x0000000078FE4D40, using 32 (20110623/tbfadt-489) [ 0.000000] ACPI: DSDT 0000000078f6d018 089D5 (v02 INT430 SYSFexxx 00001001 INTL 20090903) [ 0.000000] ACPI: FACS 0000000078fe4e40 00040 [ 0.000000] ACPI: APIC 0000000078ffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: TCPA 0000000078fe5d18 00032 (v02 00000000 00000000) [ 0.000000] ACPI: MCFG 0000000078fe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) [ 0.000000] ACPI: HPET 0000000078fe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) [ 0.000000] ACPI: BOOT 0000000078fe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SSDT 0000000078f6c818 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) [ 0.000000] ACPI: SSDT 0000000078f6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) [ 0.000000] ACPI: SLIC 0000000078f88a18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000100600000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000100600000 [ 0.000000] NODE_DATA [00000001005ec000 - 00000001005fffff] [ 0.000000] [ffffea0000000000-ffffea00039fffff] PMD -> [ffff880076400000-ffff8800781fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000091 [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x00078a71 [ 0.000000] 0: 0x00078ab5 -> 0x00078db7 [ 0.000000] 0: 0x00078fff -> 0x00079000 [ 0.000000] 0: 0x00100000 -> 0x00100600 [ 0.000000] On node 0 totalpages: 495349 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 475564 pages, LIFO batch:31 [ 0.000000] Normal zone: 21 pages used for memmap [ 0.000000] Normal zone: 1515 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 0000000078a71000 - 0000000078ab5000 [ 0.000000] PM: Registered nosave memory: 0000000078db7000 - 0000000078de7000 [ 0.000000] PM: Registered nosave memory: 0000000078de7000 - 0000000078fe7000 [ 0.000000] PM: Registered nosave memory: 0000000078fe7000 - 0000000078fff000 [ 0.000000] PM: Registered nosave memory: 0000000079000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000 [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 79000000 (gap: 79000000:85d1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880100200000 s77952 r8192 d24448 u131072 [ 0.000000] pcpu-alloc: s77952 r8192 d24448 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 480987 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/system/root resume=/dev/system/swap splash=verbose quiet systemd.sysv_console=1 video=-16 vga=0x317 drm.debug=0xe [ 0.000000] bootsplash: verbose mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1855620k/4200448k available (5426k kernel code, 2219052k absent, 125776k reserved, 6039k data, 944k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:808 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 17825792 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2294.900 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.80 BogoMIPS (lpj=9179600) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000043] Security Framework initialized [ 0.000056] AppArmor: AppArmor initialized [ 0.000287] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000878] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001125] Mount-cache hash table entries: 256 [ 0.001233] Initializing cgroup subsys cpuacct [ 0.001237] Initializing cgroup subsys memory [ 0.001251] Initializing cgroup subsys devices [ 0.001253] Initializing cgroup subsys freezer [ 0.001254] Initializing cgroup subsys net_cls [ 0.001256] Initializing cgroup subsys blkio [ 0.001261] Initializing cgroup subsys perf_event [ 0.001288] CPU: Physical Processor ID: 0 [ 0.001289] CPU: Processor Core ID: 0 [ 0.001293] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001294] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.001297] mce: CPU supports 7 MCE banks [ 0.001310] CPU0: Thermal monitoring enabled (TM1) [ 0.001317] using mwait in idle threads. [ 0.002499] ACPI: Core revision 20110623 [ 0.009515] x2apic not enabled, IRQ remapping init failed [ 0.009518] Switched APIC routing to physical flat. [ 0.009866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049532] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07 [ 0.155872] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.155877] ... version: 3 [ 0.155879] ... bit width: 48 [ 0.155880] ... generic registers: 4 [ 0.155881] ... value mask: 0000ffffffffffff [ 0.155882] ... max period: 000000007fffffff [ 0.155883] ... fixed-purpose events: 3 [ 0.155884] ... event mask: 000000070000000f [ 0.156394] NMI watchdog enabled, takes one hw-pmu counter. [ 0.156493] Booting Node 0, Processors #1 [ 0.156496] smpboot cpu 1: start_ip = 8c000 [ 0.263931] NMI watchdog enabled, takes one hw-pmu counter. [ 0.264021] #2 [ 0.264023] smpboot cpu 2: start_ip = 8c000 [ 0.371843] NMI watchdog enabled, takes one hw-pmu counter. [ 0.371942] #3 [ 0.371944] smpboot cpu 3: start_ip = 8c000 [ 0.479772] NMI watchdog enabled, takes one hw-pmu counter. [ 0.479799] Brought up 4 CPUs [ 0.479801] Total of 4 processors activated (18357.91 BogoMIPS). [ 0.482331] devtmpfs: initialized [ 0.482997] PM: Registering ACPI NVS region at 78de7000 (2097152 bytes) [ 0.483070] Dell Latitude E6xxx series board detected. Selecting PCI-method for reboots. [ 0.483189] print_constraints: dummy: [ 0.483219] RTC time: 20:56:54, date: 06/27/12 [ 0.483262] NET: Registered protocol family 16 [ 0.483413] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.483415] ACPI: bus type pci registered [ 0.483481] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.483484] PCI: not using MMCONFIG [ 0.483485] PCI: Using configuration type 1 for base access [ 0.483493] dmi type 0xB1 record - unknown flag [ 0.484137] bio: create slab <bio-0> at 0 [ 0.484219] ACPI: Added _OSI(Module Device) [ 0.484221] ACPI: Added _OSI(Processor Device) [ 0.484223] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.484225] ACPI: Added _OSI(Processor Aggregator Device) [ 0.485770] ACPI: EC: Look up EC in DSDT [ 0.499769] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.616128] ACPI: SSDT 0000000078dd7718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.616546] ACPI: Dynamic OEM Table Load: [ 0.616548] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.627990] ACPI: SSDT 0000000078dd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.628460] ACPI: Dynamic OEM Table Load: [ 0.628462] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.639781] ACPI: SSDT 0000000078dd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.640189] ACPI: Dynamic OEM Table Load: [ 0.640191] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.723674] ACPI: Interpreter enabled [ 0.723677] ACPI: (supports S0 S3 S4 S5) [ 0.723701] ACPI: Using IOAPIC for interrupt routing [ 0.723722] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.724264] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 1.444014] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 [ 1.491262] ACPI: No dock devices found. [ 1.491264] HEST: Table not found. [ 1.491267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.491739] \_SB_.PCI0:_OSC invalid UUID [ 1.491741] _OSC request data:1 8 1f [ 1.491744] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.492583] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.492586] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.492588] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.492591] pci_root PNP0A08:00: host bridge window [mem 0x7da00000-0xfeafffff] [ 1.492592] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 1.492603] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 1.492640] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 1.492650] pci 0000:00:02.0: reg 10: [mem 0x7dc00000-0x7dffffff 64bit] [ 1.492656] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref] [ 1.492661] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 1.492715] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.492739] pci 0000:00:16.0: reg 10: [mem 0x7f6b0000-0x7f6b000f 64bit] [ 1.492816] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.492821] pci 0000:00:16.0: PME# disabled [ 1.492851] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200 [ 1.492869] pci 0000:00:19.0: reg 10: [mem 0x7f600000-0x7f61ffff] [ 1.492878] pci 0000:00:19.0: reg 14: [mem 0x7f680000-0x7f680fff] [ 1.492887] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f] [ 1.492951] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.492955] pci 0000:00:19.0: PME# disabled [ 1.492980] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.493001] pci 0000:00:1a.0: reg 10: [mem 0x7f670000-0x7f6703ff] [ 1.493091] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.493096] pci 0000:00:1a.0: PME# disabled [ 1.493121] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.493137] pci 0000:00:1b.0: reg 10: [mem 0x7f660000-0x7f663fff 64bit] [ 1.493205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.493210] pci 0000:00:1b.0: PME# disabled [ 1.493236] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.493364] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.493370] pci 0000:00:1c.0: PME# disabled [ 1.493405] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 1.493537] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.493542] pci 0000:00:1c.1: PME# disabled [ 1.493578] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604 [ 1.493708] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.493713] pci 0000:00:1c.2: PME# disabled [ 1.493749] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 1.493880] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.493886] pci 0000:00:1c.3: PME# disabled [ 1.493919] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 1.493998] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.494002] pci 0000:00:1c.5: PME# disabled [ 1.494033] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.494054] pci 0000:00:1d.0: reg 10: [mem 0x7f650000-0x7f6503ff] [ 1.494145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.494149] pci 0000:00:1d.0: PME# disabled [ 1.494175] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601 [ 1.494301] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104 [ 1.494319] pci 0000:00:1f.2: reg 10: [io 0x40d0-0x40d7] [ 1.494328] pci 0000:00:1f.2: reg 14: [io 0x40c0-0x40c3] [ 1.494336] pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7] [ 1.494344] pci 0000:00:1f.2: reg 1c: [io 0x40a0-0x40a3] [ 1.494353] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 1.494361] pci 0000:00:1f.2: reg 24: [mem 0x7f640000-0x7f6407ff] [ 1.494406] pci 0000:00:1f.2: PME# supported from D3hot [ 1.494410] pci 0000:00:1f.2: PME# disabled [ 1.494429] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.494445] pci 0000:00:1f.3: reg 10: [mem 0x7f630000-0x7f6300ff 64bit] [ 1.494466] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f] [ 1.494566] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.494810] pci 0000:02:00.0: [8086:0082] type 0 class 0x000280 [ 1.494957] pci 0000:02:00.0: reg 10: [mem 0x7f500000-0x7f501fff 64bit] [ 1.495717] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.495753] pci 0000:02:00.0: PME# disabled [ 1.495940] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.495947] pci 0000:00:1c.1: bridge window [mem 0x7f500000-0x7f5fffff] [ 1.495997] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 1.496001] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.496005] pci 0000:00:1c.2: bridge window [mem 0x7ea00000-0x7f3fffff] [ 1.496012] pci 0000:00:1c.2: bridge window [mem 0x90a00000-0x913fffff 64bit pref] [ 1.496057] pci 0000:00:1c.3: PCI bridge to [bus 09-09] [ 1.496061] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.496065] pci 0000:00:1c.3: bridge window [mem 0x7e000000-0x7e9fffff] [ 1.496072] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x909fffff 64bit pref] [ 1.496155] pci 0000:0a:00.0: [1217:8221] type 0 class 0x000805 [ 1.496189] pci 0000:0a:00.0: reg 10: [mem 0x7f420000-0x7f4201ff] [ 1.496436] pci 0000:0a:00.0: supports D1 D2 [ 1.496438] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.496446] pci 0000:0a:00.0: PME# disabled [ 1.496523] pci 0000:0a:00.1: [1217:8231] type 0 class 0x000180 [ 1.496557] pci 0000:0a:00.1: reg 10: [mem 0x7f410000-0x7f410fff] [ 1.496603] pci 0000:0a:00.1: reg 18: [mem 0x7f400000-0x7f4007ff] [ 1.496807] pci 0000:0a:00.1: supports D1 D2 [ 1.496808] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.496817] pci 0000:0a:00.1: PME# disabled [ 1.496897] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] [ 1.496903] pci 0000:00:1c.5: bridge window [mem 0x7f400000-0x7f4fffff] [ 1.496935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.497142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.497186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.497230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.497274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.497333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 1.497438] \_SB_.PCI0:_OSC invalid UUID [ 1.497440] _OSC request data:1 1f 1f [ 1.497443] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.497488] \_SB_.PCI0:_OSC invalid UUID [ 1.497489] _OSC request data:1 0 1d [ 1.497492] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 1.497493] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.502358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.502415] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.502469] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.502522] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.502575] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.502628] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.502682] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 1.502736] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.502808] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.502816] vgaarb: loaded [ 1.502817] vgaarb: bridge control possible 0000:00:02.0 [ 1.502953] SCSI subsystem initialized [ 1.502995] libata version 3.00 loaded. [ 1.503062] PCI: Using ACPI for IRQ routing [ 1.504629] PCI: pci_cache_line_size set to 64 bytes [ 1.504713] reserve RAM buffer: 0000000000091400 - 000000000009ffff [ 1.504715] reserve RAM buffer: 0000000078a71000 - 000000007bffffff [ 1.504718] reserve RAM buffer: 0000000078db7000 - 000000007bffffff [ 1.504721] reserve RAM buffer: 0000000079000000 - 000000007bffffff [ 1.504722] reserve RAM buffer: 0000000100600000 - 0000000103ffffff [ 1.504803] NetLabel: Initializing [ 1.504804] NetLabel: domain hash size = 128 [ 1.504806] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.504816] NetLabel: unlabeled traffic allowed by default [ 1.504826] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.504831] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.506846] Switching to clocksource hpet [ 1.507114] Switched to NOHz mode on CPU #0 [ 1.507180] Switched to NOHz mode on CPU #3 [ 1.507187] Switched to NOHz mode on CPU #2 [ 1.507216] Switched to NOHz mode on CPU #1 [ 1.509006] AppArmor: AppArmor Filesystem Enabled [ 1.509030] pnp: PnP ACPI init [ 1.509042] ACPI: bus type pnp registered [ 1.509503] pnp 00:00: [bus 00-3e] [ 1.509505] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.509507] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.509509] pnp 00:00: [io 0x0d00-0xffff window] [ 1.509511] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.509512] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.509514] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.509516] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.509518] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.509519] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.509521] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.509523] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.509525] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.509527] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.509529] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.509530] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.509532] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.509534] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.509536] pnp 00:00: [mem 0x7da00000-0xfeafffff window] [ 1.509537] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 1.509595] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.509611] pnp 00:01: [io 0x0000-0x001f] [ 1.509612] pnp 00:01: [io 0x0081-0x0091] [ 1.509614] pnp 00:01: [io 0x0093-0x009f] [ 1.509615] pnp 00:01: [io 0x00c0-0x00df] [ 1.509617] pnp 00:01: [dma 4] [ 1.509636] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.509646] pnp 00:02: [mem 0xff000000-0xffffffff] [ 1.509664] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.509754] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.509790] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 1.509793] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 1.509805] pnp 00:04: [io 0x00f0] [ 1.509814] pnp 00:04: [irq 13] [ 1.509834] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.509845] pnp 00:05: [io 0x002e-0x002f] [ 1.509847] pnp 00:05: [io 0x004e-0x004f] [ 1.509848] pnp 00:05: [io 0x0061] [ 1.509849] pnp 00:05: [io 0x0063] [ 1.509851] pnp 00:05: [io 0x0065] [ 1.509852] pnp 00:05: [io 0x0067] [ 1.509853] pnp 00:05: [io 0x0070] [ 1.509855] pnp 00:05: [io 0x0080] [ 1.509856] pnp 00:05: [io 0x0092] [ 1.509858] pnp 00:05: [io 0x00b2-0x00b3] [ 1.509859] pnp 00:05: [io 0x0680-0x069f] [ 1.509861] pnp 00:05: [io 0x1000-0x100f] [ 1.509862] pnp 00:05: [io 0xffff] [ 1.509864] pnp 00:05: [io 0xffff] [ 1.509866] pnp 00:05: [io 0x0400-0x047f] [ 1.509867] pnp 00:05: [io 0x0500-0x057f] [ 1.509869] pnp 00:05: [io 0x164e-0x164f] [ 1.509903] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.509906] system 00:05: [io 0x1000-0x100f] has been reserved [ 1.509908] system 00:05: [io 0xffff] has been reserved [ 1.509910] system 00:05: [io 0xffff] has been reserved [ 1.509912] system 00:05: [io 0x0400-0x047f] has been reserved [ 1.509914] system 00:05: [io 0x0500-0x057f] has been reserved [ 1.509916] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.509918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.509928] pnp 00:06: [io 0x0070-0x0077] [ 1.509933] pnp 00:06: [irq 8] [ 1.509952] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.509963] pnp 00:07: [io 0x0060] [ 1.509964] pnp 00:07: [io 0x0064] [ 1.509969] pnp 00:07: [irq 1] [ 1.509988] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.518949] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 1.518964] pnp 00:09: [irq 12] [ 1.518986] pnp 00:09: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active) [ 1.519165] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 1.519167] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 1.519169] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 1.519170] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 1.519172] pnp 00:0a: [mem 0xf8000000-0xfbffffff] [ 1.519174] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 1.519175] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 1.519177] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] [ 1.519179] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 1.519180] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 1.519182] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.519184] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.519229] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.519232] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.519234] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.519236] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.519238] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.519241] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.519243] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.519245] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.519248] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 1.519250] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.519252] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.522931] pnp 00:0b: [irq 23] [ 1.522965] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active) [ 1.543412] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 1.543415] pnp 00:0c: [mem 0x40000000-0x401fffff] [ 1.543475] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 1.543478] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved [ 1.543481] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.543490] pnp: PnP ACPI: found 13 devices [ 1.543491] ACPI: ACPI bus type pnp unregistered [ 1.550003] PCI: max bus depth: 1 pci_try_num: 2 [ 1.550048] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.550059] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.550065] pci 0000:00:1c.1: bridge window [mem 0x7f500000-0x7f5fffff] [ 1.550073] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 1.550077] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 1.550082] pci 0000:00:1c.2: bridge window [mem 0x7ea00000-0x7f3fffff] [ 1.550087] pci 0000:00:1c.2: bridge window [mem 0x90a00000-0x913fffff 64bit pref] [ 1.550093] pci 0000:00:1c.3: PCI bridge to [bus 09-09] [ 1.550096] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.550102] pci 0000:00:1c.3: bridge window [mem 0x7e000000-0x7e9fffff] [ 1.550106] pci 0000:00:1c.3: bridge window [mem 0x90000000-0x909fffff 64bit pref] [ 1.550113] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] [ 1.550118] pci 0000:00:1c.5: bridge window [mem 0x7f400000-0x7f4fffff] [ 1.550140] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.550146] pci 0000:00:1c.0: setting latency timer to 64 [ 1.550156] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.550160] pci 0000:00:1c.1: setting latency timer to 64 [ 1.550170] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.550174] pci 0000:00:1c.2: setting latency timer to 64 [ 1.550184] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.550187] pci 0000:00:1c.3: setting latency timer to 64 [ 1.550194] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.550199] pci 0000:00:1c.5: setting latency timer to 64 [ 1.550203] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.550204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.550206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.550208] pci_bus 0000:00: resource 7 [mem 0x7da00000-0xfeafffff] [ 1.550210] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 1.550212] pci_bus 0000:02: resource 1 [mem 0x7f500000-0x7f5fffff] [ 1.550214] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.550215] pci_bus 0000:03: resource 1 [mem 0x7ea00000-0x7f3fffff] [ 1.550217] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x913fffff 64bit pref] [ 1.550219] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 1.550221] pci_bus 0000:09: resource 1 [mem 0x7e000000-0x7e9fffff] [ 1.550223] pci_bus 0000:09: resource 2 [mem 0x90000000-0x909fffff 64bit pref] [ 1.550225] pci_bus 0000:0a: resource 1 [mem 0x7f400000-0x7f4fffff] [ 1.550291] NET: Registered protocol family 2 [ 1.550398] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.550942] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.551869] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.552114] TCP: Hash tables configured (established 262144 bind 65536) [ 1.552116] TCP reno registered [ 1.552123] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.552136] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.552266] NET: Registered protocol family 1 [ 1.552279] pci 0000:00:02.0: Boot video device [ 1.552379] PCI: CLS 64 bytes, default 64 [ 1.552421] Unpacking initramfs... [ 1.777709] Freeing initrd memory: 12908k freed [ 1.779516] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.779521] Placing 64MB software IO TLB between ffff880072400000 - ffff880076400000 [ 1.779522] software IO TLB at phys 0x72400000 - 0x76400000 [ 1.779538] Simple Boot Flag at 0xf3 set to 0x1 [ 1.780081] audit: initializing netlink socket (disabled) [ 1.780095] type=2000 audit(1340830615.620:1): initialized [ 1.805775] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.811473] VFS: Disk quotas dquot_6.5.2 [ 1.811509] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.811764] msgmni has been set to 3649 [ 1.811941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.811967] io scheduler noop registered [ 1.811968] io scheduler deadline registered [ 1.811988] io scheduler cfq registered (default) [ 1.812351] vesafb: mode is 1024x768x16, linelength=2048, pages=41 [ 1.812352] vesafb: scrolling: redraw [ 1.812354] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.813036] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 65472k [ 1.813172] bootsplash 3.2.0-2010/03/31: looking for picture... [ 1.813174] bootsplash: silentjpeg size 89863 bytes [ 1.820543] bootsplash: ...found (1024x768, 36220 bytes, v3). [ 1.820659] bootsplash: silentjpeg size 108724 bytes [ 1.868966] Console: switching to colour frame buffer device 124x44 [ 1.896835] fb0: VESA VGA frame buffer device [ 1.896849] intel_idle: MWAIT substates: 0x21120 [ 1.896850] intel_idle: v0.4 model 0x2A [ 1.896852] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.896905] ERST: Table is not found! [ 1.896907] GHES: HEST is not enabled! [ 1.896987] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 2.110838] Non-volatile memory driver v1.3 [ 2.110840] Linux agpgart interface v0.103 [ 2.110915] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 2.111043] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.112217] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 2.112323] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 2.112421] ahci 0000:00:1f.2: version 3.0 [ 2.112433] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.112476] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 2.112501] ahci: SSS flag set, parallel bus scan disabled [ 2.126527] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode [ 2.126540] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.126545] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.158908] scsi0 : ahci [ 2.158993] scsi1 : ahci [ 2.159054] scsi2 : ahci [ 2.159113] scsi3 : ahci [ 2.159172] scsi4 : ahci [ 2.159231] scsi5 : ahci [ 2.182589] ata1: SATA max UDMA/133 abar m2048 at 0x7f640000 port 0x7f640100 irq 40 [ 2.182593] ata2: SATA max UDMA/133 abar m2048 at 0x7f640000 port 0x7f640180 irq 40 [ 2.182595] ata3: DUMMY [ 2.182598] ata4: SATA max UDMA/133 abar m2048 at 0x7f640000 port 0x7f640280 irq 40 [ 2.182601] ata5: SATA max UDMA/133 abar m2048 at 0x7f640000 port 0x7f640300 irq 40 [ 2.182604] ata6: SATA max UDMA/133 abar m2048 at 0x7f640000 port 0x7f640380 irq 40 [ 2.182691] Fixed MDIO Bus: probed [ 2.182734] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.182944] i8042: Warning: Keylock active [ 2.184178] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.184183] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.184270] mousedev: PS/2 mouse device common for all mice [ 2.184349] rtc_cmos 00:06: RTC can wake from S4 [ 2.184472] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.184507] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.184620] cpuidle: using governor ladder [ 2.184774] cpuidle: using governor menu [ 2.184775] EFI Variables Facility v0.08 2004-May-17 [ 2.184932] TCP cubic registered [ 2.185009] NET: Registered protocol family 10 [ 2.185195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.185375] lib80211: common routines for IEEE802.11 drivers [ 2.185377] lib80211_crypt: registered algorithm 'NULL' [ 2.185378] Registering the dns_resolver key type [ 2.185392] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 2.185511] PM: Checking hibernation image partition /dev/system/swap [ 2.502384] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.507306] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.507715] ata1.00: ATA-8: WDC WD2500BEVT-75A23T0, 01.01A01, max UDMA/133 [ 2.507724] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.511296] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.511651] ata1.00: configured for UDMA/133 [ 2.511805] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-7 01.0 PQ: 0 ANSI: 5 [ 2.512027] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.512099] sd 0:0:0:0: [sda] Write Protect is off [ 2.512102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.512131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.580227] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.581086] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.778289] Refined TSC clocksource calibration: 2294.785 MHz. [ 2.778294] Switching to clocksource tsc [ 2.830205] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.841562] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D400, max UDMA/100 [ 2.856526] ata2.00: configured for UDMA/100 [ 2.864485] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633J D400 PQ: 0 ANSI: 5 [ 3.182014] ata4: SATA link down (SStatus 0 SControl 300) [ 3.273902] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1 [ 3.286934] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2 [ 3.501865] ata5: SATA link down (SStatus 0 SControl 300) [ 3.821701] ata6: SATA link down (SStatus 0 SControl 300) [ 3.821737] PM: Hibernation image not present or could not be loaded. [ 3.821763] registered taskstats version 1 [ 3.824805] Magic number: 0:44:954 [ 3.824908] rtc_cmos 00:06: setting system clock to 2012-06-27 20:56:57 UTC (1340830617) [ 3.826309] Freeing unused kernel memory: 944k freed [ 3.826414] Write protecting the kernel read-only data: 10240k [ 3.828348] Freeing unused kernel memory: 700k freed [ 3.828819] Freeing unused kernel memory: 144k freed [ 3.854385] sdhci: Secure Digital Host Controller Interface driver [ 3.854387] sdhci: Copyright(c) Pierre Ossman [ 3.854568] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5) [ 3.854590] sdhci-pci 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.854622] sdhci-pci 0000:0a:00.0: Invalid iomem size. You may experience problems. [ 3.855061] sdhci-pci 0000:0a:00.0: setting latency timer to 64 [ 3.855083] _regulator_get: 0000:0a:00.0 supply vmmc not found, using dummy regulator [ 3.855115] Registered led device: mmc0:: [ 3.855150] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA [ 3.862748] udevd[101]: starting version 173 [ 3.873228] ACPI: acpi_idle yielding to intel_idle [ 3.874788] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 3.882462] ACPI: Lid Switch [LID] [ 3.882524] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 3.885413] ACPI: Power Button [PBTN] [ 3.885477] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 [ 3.889964] usbcore: registered new interface driver usbfs [ 3.889987] usbcore: registered new interface driver hub [ 3.891580] ACPI: Sleep Button [SBTN] [ 3.891646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 3.895298] ACPI: Power Button [PWRF] [ 3.901918] [drm] Initialized drm 1.1.0 20060810 [ 3.913629] usbcore: registered new device driver usb [ 3.914212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.914242] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.914267] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.914271] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 3.914298] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.914328] ehci_hcd 0000:00:1a.0: debug port 2 [ 3.918235] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 3.918275] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x7f670000 [ 3.933549] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.933581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.933584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.933587] usb usb1: Product: EHCI Host Controller [ 3.933589] usb usb1: Manufacturer: Linux 3.1.10-1.13-default ehci_hcd [ 3.933592] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.933826] hub 1-0:1.0: USB hub found [ 3.933833] hub 1-0:1.0: 2 ports detected [ 3.945733] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.945771] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.945776] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 3.945792] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.945824] ehci_hcd 0000:00:1d.0: debug port 2 [ 3.949699] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 3.949708] ehci_hcd 0000:00:1d.0: irq 17, io mem 0x7f650000 [ 3.965614] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.965659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.965661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.965664] usb usb2: Product: EHCI Host Controller [ 3.965665] usb usb2: Manufacturer: Linux 3.1.10-1.13-default ehci_hcd [ 3.965667] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.965797] hub 2-0:1.0: USB hub found [ 3.965802] hub 2-0:1.0: 2 ports detected [ 3.969661] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.969666] i915 0000:00:02.0: setting latency timer to 64 [ 3.978043] mmc0: new SD card at address 4bd5 [ 3.978344] mmcblk0: mmc0:4bd5 SD02G 1.83 GiB (ro) [ 3.979056] mmcblk0: p1 p2 [ 4.031441] [drm:intel_opregion_setup], graphic opregion physical addr: 0x78f68018 [ 4.031481] [drm:intel_opregion_setup], Public ACPI methods supported [ 4.031483] [drm:intel_opregion_setup], SWSCI supported [ 4.031484] [drm:intel_opregion_setup], ASLE supported [ 4.031509] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 4.031512] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.031514] [drm] Driver supports precise vblank timestamp query. [ 4.031517] [drm:intel_detect_pch], Found CougarPoint PCH [ 4.031520] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 4.031522] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 4.031526] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 4.031528] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 114060 1600 1648 1680 2044 900 902 907 930 0x8 0xa [ 4.031537] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 4.031538] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 4.031542] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 4.045557] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 4.045576] [drm:intel_modeset_init], 2 display pipes available. [ 4.045586] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.107977] [drm:intel_crt_init], pch crt adpa set to 0xf40000 [ 4.109514] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.109519] ACPI: Thermal Zone [THM] (25 C) [ 4.110369] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 4.110372] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 4.110433] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 4.110941] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.110944] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.111452] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.111453] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.111523] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 4.112032] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.112034] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.112543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.112545] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.112574] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 4.113082] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.113084] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.113592] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.113594] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 4.113609] [drm:intel_panel_get_backlight], get backlight PWM = 4882 [ 4.113612] [drm:intel_panel_get_backlight], get backlight PWM = 4882 [ 4.113614] [drm:intel_panel_set_backlight], set backlight PWM = 0 [ 4.113637] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 4.113641] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 4.169514] [drm:intel_wait_for_vblank], vblank wait timed out [ 4.193896] [drm:intel_update_fbc], [ 4.193900] [drm:intel_update_fbc], no output, disabling [ 4.194046] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 4.194050] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 4.194053] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 4.194055] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 4.194687] [drm:intel_update_fbc], [ 4.194688] [drm:intel_update_fbc], no output, disabling [ 4.233051] [drm:init_status_page], render ring hws offset: 0x00000000 [ 4.233166] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000 [ 4.233257] [drm:init_status_page], blt ring hws offset: 0x00042000 [ 4.233342] [drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M [ 4.233370] [drm:intel_panel_set_backlight], set backlight PWM = 0 [ 4.233402] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector LVDS-1 0x0 at 60Hz [ 4.233405] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector VGA-1 0x0 at 60Hz [ 4.233408] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-1 0x0 at 60Hz [ 4.233411] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-1 0x0 at 60Hz [ 4.233414] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-2 0x0 at 60Hz [ 4.233417] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-3 0x0 at 60Hz [ 4.233419] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-2 0x0 at 60Hz [ 4.233422] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-3 0x0 at 60Hz [ 4.233425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 4.233435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 4.233438] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 4.233442] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 4.233445] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 4.233449] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 4.249402] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 4.249421] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 4.249428] [drm:intel_crt_detect], CRT not detected via hotplug [ 4.249435] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 4.249455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 4.260927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 4.260929] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 4.261438] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.269901] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.277897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.285390] [drm:ironlake_dp_detect], DPCD: 0000 [ 4.285401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 4.285410] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 4.296906] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 4.296908] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 4.308386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 4.308389] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 4.308896] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.313876] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.321869] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.329376] [drm:ironlake_dp_detect], DPCD: 0000 [ 4.329387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 4.329396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 4.329919] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.337877] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.345870] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 4.353361] [drm:ironlake_dp_detect], DPCD: 0000 [ 4.353373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 4.353381] [drm:drm_setup_crtcs], [ 4.353398] [drm:drm_enable_connectors], connector 5 enabled? yes [ 4.353400] [drm:drm_enable_connectors], connector 12 enabled? no [ 4.353402] [drm:drm_enable_connectors], connector 15 enabled? no [ 4.353403] [drm:drm_enable_connectors], connector 18 enabled? no [ 4.353405] [drm:drm_enable_connectors], connector 21 enabled? no [ 4.353407] [drm:drm_enable_connectors], connector 23 enabled? no [ 4.353409] [drm:drm_enable_connectors], connector 24 enabled? no [ 4.353410] [drm:drm_enable_connectors], connector 26 enabled? no [ 4.353412] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 4.353414] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 4.353416] [drm:drm_target_preferred], found mode 1600x900 [ 4.353418] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 4.353421] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3 [ 4.356731] [drm:intelfb_create], allocated 1600x900 fb: 0x00063000, bo ffff88001f5cae00 [ 4.356737] checking generic (80000000 3ff0000) vs hw (80000000 10000000) [ 4.356739] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 4.356752] Console: switching to colour dummy device 80x25 [ 4.357249] fbcon: inteldrmfb (fb0) is primary device [ 4.357305] [drm:drm_crtc_helper_set_config], [ 4.357307] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.357320] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 4.357322] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 4.357324] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.357327] [drm:drm_mode_debug_printmodeline], Modeline 8:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 4.357330] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 4.357332] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 4.357333] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.357335] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 4.357337] [drm:drm_mode_debug_printmodeline], Modeline 8:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 4.357342] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 4.357367] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [ 4.357585] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 4.357586] [drm:drm_mode_debug_printmodeline], Modeline 8:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 4.381711] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.381718] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.381987] hub 1-1:1.0: USB hub found [ 4.382072] hub 1-1:1.0: 6 ports detected [ 4.413320] [drm:intel_wait_for_vblank], vblank wait timed out [ 4.413331] [drm:intel_pipe_set_base_atomic], Writing base 00063000 00000000 0 0 3200 [ 4.413340] [drm:intel_update_fbc], [ 4.413344] [drm:intel_update_fbc], fbc disabled per module param (default off) [ 4.413362] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 4 [ 4.413365] [drm:ironlake_check_srwm], watermark 1: display plane 8, fbc lines 3, cursor 4 [ 4.413367] [drm:ironlake_check_srwm], watermark 2: display plane 10, fbc lines 3, cursor 4 [ 4.413369] [drm:ironlake_check_srwm], watermark 3: display plane 42, fbc lines 3, cursor 4 [ 4.413372] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1600x900] [ 4.413375] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 5, cursor: 4 [ 4.413377] [drm:ironlake_check_srwm], watermark 1: display plane 8, fbc lines 3, cursor 4 [ 4.413379] [drm:ironlake_check_srwm], watermark 2: display plane 10, fbc lines 3, cursor 4 [ 4.413381] [drm:ironlake_check_srwm], watermark 3: display plane 42, fbc lines 3, cursor 4 [ 4.469290] [drm:intel_wait_for_vblank], vblank wait timed out [ 4.493269] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 4.525270] [drm:intel_wait_for_vblank], vblank wait timed out [ 4.526079] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 4.526082] [drm:gen6_fdi_link_train], FDI train 1 done. [ 4.526731] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 4.526734] [drm:gen6_fdi_link_train], FDI train 2 done. [ 4.526735] [drm:gen6_fdi_link_train], FDI train done. [ 4.527943] [drm:intel_update_fbc], [ 4.527944] [drm:intel_update_fbc], fbc disabled per module param (default off) [ 4.527952] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 4.527956] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 4.527958] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [ 4.527980] [drm:drm_crtc_helper_set_config], [ 4.527981] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 4.527987] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.527991] [drm:drm_crtc_helper_set_config], [ 4.527992] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.527999] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.528001] [drm:drm_crtc_helper_set_config], [ 4.528002] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 4.528005] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.528007] [drm:drm_crtc_helper_set_config], [ 4.528008] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.528012] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.540874] [drm:drm_crtc_helper_set_config], [ 4.540876] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.540886] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.540888] [drm:drm_crtc_helper_set_config], [ 4.540889] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 4.540892] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.540894] [drm:drm_crtc_helper_set_config], [ 4.540895] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.540899] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.540991] [drm:drm_crtc_helper_set_config], [ 4.540992] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.540996] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.544633] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 4.553681] [drm:drm_crtc_helper_set_config], [ 4.553683] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.553691] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.566131] Console: switching to colour frame buffer device 196x52 [ 4.566219] [drm:drm_crtc_helper_set_config], [ 4.566220] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 4.566227] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.578906] fb0: inteldrmfb frame buffer device [ 4.578908] drm: registered panic notifier [ 4.625654] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.625673] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.625860] hub 2-1:1.0: USB hub found [ 4.625949] hub 2-1:1.0: 8 ports detected [ 4.697349] usb 1-1.4: new full speed USB device number 3 using ehci_hcd [ 4.793506] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187 [ 4.793509] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.793511] usb 1-1.4: Product: DW375 Bluetooth Module [ 4.793513] usb 1-1.4: Manufacturer: Dell Computer Corp [ 4.793514] usb 1-1.4: SerialNumber: 90004EEDDDB0 [ 4.865204] usb 1-1.5: new high speed USB device number 4 using ehci_hcd [ 4.865717] acpi device:38: registered as cooling_device4 [ 4.964670] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=181b [ 4.964679] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.964685] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD [ 4.964690] usb 1-1.5: Manufacturer: M092R-E00-1302-SB05B [ 4.977535] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 4.977539] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 5.037180] usb 2-1.8: new full speed USB device number 3 using ehci_hcd [ 5.141256] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 5.141317] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 5.141352] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.155613] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801 [ 5.155622] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.155628] usb 2-1.8: Product: 5880 [ 5.155632] usb 2-1.8: Manufacturer: Broadcom Corp [ 5.155636] usb 2-1.8: SerialNumber: 0123456789ABCD [ 5.155737] usb 2-1.8: config 0 descriptor?? [ 5.351010] md: linear personality registered for level -1 [ 8.089273] EXT4-fs (mmcblk0p2): mounting ext2 file system using the ext4 subsystem [ 8.091095] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 8.152375] device-mapper: uevent: version 1.0.3 [ 8.152447] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel at redhat.com [ 10.916871] PM: Marking nosave pages: 0000000000091000 - 0000000000100000 [ 10.916875] PM: Marking nosave pages: 0000000020000000 - 0000000020200000 [ 10.916884] PM: Marking nosave pages: 0000000040000000 - 0000000040200000 [ 10.916892] PM: Marking nosave pages: 0000000078a71000 - 0000000078ab5000 [ 10.916895] PM: Marking nosave pages: 0000000078db7000 - 0000000078fff000 [ 10.916905] PM: Marking nosave pages: 0000000079000000 - 0000000100000000 [ 10.918451] PM: Basic memory bitmaps created [ 10.939589] PM: Basic memory bitmaps freed [ 10.939597] video LNXVIDEO:00: Restoring backlight state [ 11.205611] PM: Starting manual resume from disk [ 11.205614] PM: Hibernation image partition 253:3 present [ 11.205615] PM: Looking for hibernation image. [ 11.205908] PM: Image not found (code -22) [ 11.205910] PM: Hibernation image not present or could not be loaded. [ 11.301927] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 11.301931] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 11.420446] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 11.676689] EXT4-fs (dm-2): re-mounted. Opts: acl,user_xattr [ 12.545225] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 13.286471] systemd[1]: Set hostname to <ricercatore.site>. [ 14.580103] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 14.580114] [drm:intel_crt_detect], CRT not detected via hotplug [ 14.580121] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [ 14.591684] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [ 14.592193] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.600597] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.608588] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.616070] [drm:ironlake_dp_detect], DPCD: 0000 [ 14.616082] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [ 14.627628] [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [ 14.639169] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-3] status updated from 2 to 2 [ 14.639679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.644563] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.652565] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.660041] [drm:ironlake_dp_detect], DPCD: 0000 [ 14.660045] [drm:output_poll_execute], [CONNECTOR:24:DP-2] status updated from 2 to 2 [ 14.660555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.668551] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.676545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 14.684043] [drm:ironlake_dp_detect], DPCD: 0000 [ 14.684055] [drm:output_poll_execute], [CONNECTOR:26:DP-3] status updated from 2 to 2 [ 17.509702] udevd[555]: starting version 173 [ 18.896222] boot.localnet[571]: Using boot-specified hostname 'ricercatore.site' [ 18.896362] boot.lvm[578]: Waiting for udev to settle... [ 19.084298] EXT4-fs (dm-2): re-mounted. Opts: acl,user_xattr [ 19.190294] boot.localnet[571]: Setting up hostname 'ricercatore'..done [ 19.247958] scsi6 : vhba [ 19.278111] boot.localnet[571]: Setting up loopback interface RTNETLINK answers: File exists [ 19.279184] boot.localnet[571]: ..done [ 19.404400] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 19.959703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.961394] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 20.782016] [drm:drm_crtc_helper_set_config], [ 20.782018] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 20.782030] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 23.464152] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 23.464537] ACPI: AC Adapter [AC] (on-line) [ 23.564917] iTCO_vendor_support: vendor-support=0 [ 23.578154] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 23.707666] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k [ 23.707670] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 23.707712] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 23.707725] e1000e 0000:00:19.0: setting latency timer to 64 [ 23.707855] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 23.713275] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.722642] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.722688] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 23.732600] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 23.732606] ACPI: Battery Slot [BAT0] (battery present) [ 23.859733] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 23.859743] ACPI: Battery Slot [BAT1] (battery absent) [ 23.922196] Bluetooth: Core ver 2.16 [ 23.922225] NET: Registered protocol family 31 [ 23.922228] Bluetooth: HCI device and connection manager initialized [ 23.922230] Bluetooth: HCI socket layer initialized [ 23.922233] Bluetooth: L2CAP socket layer initialized [ 23.922238] Bluetooth: SCO socket layer initialized [ 23.981696] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 23.987767] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 23.987775] ACPI: Battery Slot [BAT2] (battery absent) [ 23.987931] wmi: Mapper loaded [ 23.994990] usbcore: registered new interface driver btusb [ 24.006082] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:54:1e:d9 [ 24.006085] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 24.006129] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 3041FF-0FF [ 24.006160] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.006167] mei 0000:00:16.0: setting latency timer to 64 [ 24.081419] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 24.081428] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 24.081569] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 24.114443] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 24.114450] ACPI: resource 0000:00:1f.3 [io 0x4040-0x405f] conflicts with ACPI region SMBI [io 0x4040-0x404f] [ 24.114452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.223528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 24.223613] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 24.223701] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 24.662425] cfg80211: Calling CRDA to update world regulatory domain [ 24.880571] input: Dell WMI hotkeys as /devices/virtual/input/input9 [ 24.889549] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 24.899695] parport_pc 00:08: [io 0x0378-0x037b] [ 24.899757] parport_pc 00:08: [irq 5] [ 25.007734] parport_pc 00:08: activated [ 25.007738] parport_pc 00:08: reported by Plug and Play ACPI [ 25.007819] parport_pc 00:08: disabled [ 25.323239] ppdev: user-space parallel port driver [ 25.338167] Linux video capture interface: v2.00 [ 25.493712] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:181b) [ 25.495753] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10 [ 25.495827] usbcore: registered new interface driver uvcvideo [ 25.495829] USB Video Class driver (1.1.1) [ 25.724623] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 25.724626] Copyright(c) 2003-2011 Intel Corporation [ 25.724668] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 25.724676] iwlagn 0000:02:00.0: setting latency timer to 64 [ 25.724701] iwlagn 0000:02:00.0: pci_resource_len = 0x00002000 [ 25.724703] iwlagn 0000:02:00.0: pci_resource_base = ffffc90004910000 [ 25.724704] iwlagn 0000:02:00.0: HW Revision ID = 0x34 [ 25.724783] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X [ 25.724819] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 25.724876] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S [ 25.740017] iwlagn 0000:02:00.0: device EEPROM VER=0x715, CALIB=0x6 [ 25.740020] iwlagn 0000:02:00.0: Device SKU: 0X1f0 [ 25.740021] iwlagn 0000:02:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 25.740035] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 25.825986] cfg80211: World regulatory domain updated: [ 25.825989] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.825992] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.825994] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.825996] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 25.825998] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.825999] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 25.842814] ifup[926]: Service network not started and mode 'auto' -> skipping [ 26.645256] iwlagn 0000:02:00.0: loaded firmware version 17.168.5.3 build 42301 [ 26.645437] Registered led device: phy0-led [ 27.073812] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 27.099524] ifup[960]: Service network not started and mode 'auto' -> skipping [ 27.639557] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 27.639616] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 27.639642] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 28.127438] Adding 2097148k swap on /dev/mapper/system-swap. Priority:0 extents:1 across:2097148k [ 28.370192] ALSA hda_codec.c:4895 autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line [ 28.370196] ALSA hda_codec.c:4899 speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 28.370198] ALSA hda_codec.c:4903 hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 28.370200] ALSA hda_codec.c:4904 mono: mono_out=0x0 [ 28.370202] ALSA hda_codec.c:4908 inputs: [ 28.370204] ALSA hda_codec.c:4912 Mic=0xa [ 28.370205] ALSA hda_codec.c:4912 Dock Mic=0xf [ 28.370207] ALSA hda_codec.c:4914 [ 28.370709] ALSA patch_sigmatel.c:3116 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) [ 28.894936] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 28.895273] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 28.895606] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 28.905984] input: HDA Intel PCH Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 28.906119] input: HDA Intel PCH Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 28.906181] input: HDA Intel PCH Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 28.906245] input: HDA Intel PCH HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 28.906483] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 28.906536] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 28.906586] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 29.861904] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input18 [ 29.924595] boot.lvm[578]: Scanning for LVM volume groups... [ 33.987043] boot.lvm[578]: Reading all physical volumes. This may take a while... [ 33.987051] boot.lvm[578]: Found volume group "system" using metadata type lvm2 [ 33.987238] boot.lvm[578]: Activating LVM volume groups... [ 35.427492] boot.lvm[578]: 3 logical volume(s) in volume group "system" now active [ 35.427911] boot.lvm[578]: ..done [ 36.051414] systemd-cryptsetup[1044]: Volume cr_sda6 already active. [ 36.448579] systemd-fsck[1041]: /dev/sda5: clean, 283/41832 files, 67092/166912 blocks [ 36.448913] systemd-fsck[1042]: /dev/mapper/system-data: clean, 13847/8519680 files, 30570756/34062336 blocks [ 37.287161] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 37.822463] boot.lvm[1051]: Can't deactivate volume group "system" with 3 open logical volume(s) [ 37.823120] boot.lvm[1051]: ..skipped [ 37.872784] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 38.000455] boot.lvm[1072]: Waiting for udev to settle... [ 38.244262] boot.lvm[1072]: Scanning for LVM volume groups... [ 39.768710] boot.lvm[1072]: Reading all physical volumes. This may take a while... [ 39.768717] boot.lvm[1072]: Found volume group "system" using metadata type lvm2 [ 39.768830] boot.lvm[1072]: Activating LVM volume groups... [ 41.411046] boot.lvm[1072]: 3 logical volume(s) in volume group "system" now active [ 41.411362] boot.lvm[1072]: ..done [ 41.702770] boot.quota[1085]: Turning quota on [ 41.704119] boot.quota[1085]: Checking quotas. This may take some time. [ 41.759704] boot.quota[1085]: ..done [ 43.119051] type=1400 audit(1340845056.808:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1117 comm="apparmor_parser" [ 43.125593] type=1400 audit(1340845056.816:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm-guest-session-wrapper" pid=1123 comm="apparmor_parser" [ 43.131601] type=1400 audit(1340845056.820:4): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1129 comm="apparmor_parser" [ 43.135958] type=1400 audit(1340845056.824:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1133 comm="apparmor_parser" [ 43.140397] type=1400 audit(1340845056.828:6): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1137 comm="apparmor_parser" [ 43.146944] type=1400 audit(1340845056.836:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=1142 comm="apparmor_parser" [ 43.147284] type=1400 audit(1340845056.836:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=1142 comm="apparmor_parser" [ 43.147596] type=1400 audit(1340845056.836:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=1142 comm="apparmor_parser" [ 43.147854] type=1400 audit(1340845056.836:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=1142 comm="apparmor_parser" [ 43.152691] type=1400 audit(1340845056.840:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=1146 comm="apparmor_parser" [ 43.238105] boot.apparmor[1100]: Starting AppArmor ..done [ 43.693884] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x12 [ 43.695427] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x12 [ 43.696626] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x12 [ 43.697672] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x12 [ 43.698766] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba [ 43.722596] microcode: CPU0 updated to revision 0x1b, date = 2011-07-14 [ 43.723077] microcode: CPU1 updated to revision 0x1b, date = 2011-07-14 [ 43.723779] microcode: CPU2 updated to revision 0x1b, date = 2011-07-14 [ 43.724255] microcode: CPU3 updated to revision 0x1b, date = 2011-07-14 [ 43.725146] microcode.ctl[1227]: Checking/updating CPU microcode ..done [ 43.897796] brld[1248]: Starting brld [ 43.901030] brld[1248]: ..done [ 43.937598] cpufreq[1251]: Loading CPUFreq modules..done [ 44.109125] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 44.115012] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 44.117214] ip_tables: (C) 2000-2006 Netfilter Core Team [ 44.146198] SuSEfirewall2[1326]: Firewall rules set to CLOSE. [ 44.146762] SuSEfirewall2_init[1259]: Loading basic firewall rules ..done [ 45.449620] sbl[1329]: Starting sbl [ 45.454186] sbl[1329]: ..done [ 46.875720] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 46.931577] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 46.931863] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.955650] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S [ 46.962006] iwlagn 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 46.973368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.973371] Bluetooth: BNEP filters: protocol multicast [ 47.024500] Bluetooth: RFCOMM TTY layer initialized [ 47.024512] Bluetooth: RFCOMM socket layer initialized [ 47.024516] Bluetooth: RFCOMM ver 1.11 [ 47.251667] iwlagn 0000:02:00.0: L1 Disabled; Enabling L0S [ 47.258027] iwlagn 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 47.375182] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 47.694074] NET: Registered protocol family 17 [ 48.105316] [drm:drm_crtc_helper_set_config], [ 48.105319] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 48.105335] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 48.244131] [drm:drm_crtc_helper_set_config], [ 48.244133] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 48.244142] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 48.249850] [drm:i915_driver_open], [ 48.249876] [drm:drm_crtc_helper_set_config], [ 48.249878] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0) [ 48.249888] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 48.249890] [drm:drm_crtc_helper_set_config], [ 48.249891] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 48.249894] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 48.249911] [drm:i915_driver_open], [ 48.250087] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 48.250090] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[8] ENCODERS[8] [ 48.250126] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 48.250128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 48.250140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 48.250142] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 48.250146] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 48.250150] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 48.283001] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 48.283006] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 48.283010] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.283013] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.283015] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 48.283019] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 48.283021] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 48.283023] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.283025] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.283026] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 48.283049] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 48.283051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 48.294084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 48.294087] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 48.294089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 48.305145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 48.305164] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.305166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.305672] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.311320] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.319363] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.326790] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.326803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 48.326819] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.326826] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.327339] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.335327] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.343292] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.350751] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.350763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 48.350847] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 48.350855] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 48.362243] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 48.362253] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 48.362255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 48.373315] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 48.373364] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 48.373366] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 48.384441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 48.384444] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 48.384446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 48.395550] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 48.395587] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 48.395589] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 48.396095] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.403246] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.411210] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.418740] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.418770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 48.418798] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 48.418803] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 48.419314] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.427217] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.435201] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.442684] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.442690] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 48.442745] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 48.442748] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 48.443256] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.451225] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.459230] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.466721] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.466738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 48.466774] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 48.466777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 48.467284] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.475230] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.483221] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.492405] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.492412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 48.492491] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 48.492495] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 48.492507] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 48.492511] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 48.492516] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 48.492521] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 48.493252] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 48.493256] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 48.493260] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.493263] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.493266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 48.493269] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 48.493271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 48.493274] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 48.493277] [drm:intel_crt_detect], CRT not detected via hotplug [ 48.493279] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 48.493298] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 48.493301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 48.504566] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 48.504578] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 48.504582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 48.515636] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 48.515676] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.515679] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.516186] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.523200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.531185] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.538679] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.538692] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 48.538708] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 48.538715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 48.539227] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.547199] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.555177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.562670] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.562684] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 48.562781] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 48.562793] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 48.574215] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 48.574223] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 48.574225] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 48.585272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 48.585299] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 48.585301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 48.596328] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 48.596331] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 48.596333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 48.607355] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 48.607369] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 48.607371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 48.607878] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.615138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.623162] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.630703] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.630720] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 48.630745] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 48.630752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 48.631265] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.639138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.647132] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.654639] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.654652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 48.654737] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 48.654745] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 48.655257] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.663126] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.671123] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.678633] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.678645] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 48.678661] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 48.678667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 48.679179] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.687115] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.695113] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 48.702638] [drm:ironlake_dp_detect], DPCD: 0000 [ 48.702651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 48.707661] [drm:drm_mode_addfb], [FB:30] [ 48.707782] [drm:drm_mode_setcrtc], [CRTC:3] [ 48.707792] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [ 48.707798] [drm:drm_crtc_helper_set_config], [ 48.707802] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:30] #connectors=1 (x y) (0 0) [ 48.707823] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 48.707830] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 48.707835] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x900" 0 114060 1600 1648 1680 2044 900 902 907 930 0x0 0x9 [ 48.707850] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 48.762589] [drm:intel_wait_for_vblank], vblank wait timed out [ 48.787005] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6 [ 48.787017] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6 [ 48.787026] [drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6 [ 48.787033] [drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6 [ 48.787040] [drm:intel_update_fbc], [ 48.787045] [drm:intel_update_fbc], fbc disabled per module param (default off) [ 48.787058] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [ 48.787292] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 48.787297] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x900" 0 114060 1600 1648 1680 2044 900 902 907 930 0x0 0x9 [ 48.842529] [drm:intel_wait_for_vblank], vblank wait timed out [ 48.855061] [drm:intel_pipe_set_base_atomic], Writing base 00323000 00000000 0 0 6656 [ 48.855074] [drm:intel_update_fbc], [ 48.855079] [drm:intel_update_fbc], fbc disabled per module param (default off) [ 48.910503] [drm:intel_wait_for_vblank], vblank wait timed out [ 48.910515] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6 [ 48.910523] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6 [ 48.910531] [drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6 [ 48.910539] [drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6 [ 48.910549] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:31:1600x900] [ 48.910558] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 7, cursor: 6 [ 48.910565] [drm:ironlake_check_srwm], watermark 1: display plane 13, fbc lines 3, cursor 6 [ 48.910572] [drm:ironlake_check_srwm], watermark 2: display plane 17, fbc lines 3, cursor 6 [ 48.910579] [drm:ironlake_check_srwm], watermark 3: display plane 81, fbc lines 3, cursor 6 [ 48.966501] [drm:intel_wait_for_vblank], vblank wait timed out [ 49.022434] [drm:intel_wait_for_vblank], vblank wait timed out [ 49.023245] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 49.023251] [drm:gen6_fdi_link_train], FDI train 1 done. [ 49.023905] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 49.023910] [drm:gen6_fdi_link_train], FDI train 2 done. [ 49.023915] [drm:gen6_fdi_link_train], FDI train done. [ 49.025128] [drm:intel_update_fbc], [ 49.025133] [drm:intel_update_fbc], fbc disabled per module param (default off) [ 49.025145] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 49.025155] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 49.025162] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [ 49.041838] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 49.097205] e1000e 0000:00:19.0: PCI INT A disabled [ 49.098729] e1000e 0000:00:19.0: PME# enabled [ 49.350647] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 49.350658] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 49.517312] [drm:intel_crtc_cursor_set], [ 56.025430] [drm:intel_crtc_cursor_set], [ 56.025440] [drm:intel_crtc_cursor_set], cursor off [ 58.270159] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 58.270171] [drm:intel_crt_detect], CRT not detected via hotplug [ 58.270178] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [ 58.281606] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [ 58.282129] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.290456] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.298460] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.305943] [drm:ironlake_dp_detect], DPCD: 0000 [ 58.305955] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [ 58.317326] [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [ 58.328695] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-3] status updated from 2 to 2 [ 58.329208] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.334426] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.342424] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.349916] [drm:ironlake_dp_detect], DPCD: 0000 [ 58.349927] [drm:output_poll_execute], [CONNECTOR:24:DP-2] status updated from 2 to 2 [ 58.350442] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.358671] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.366421] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 58.373911] [drm:ironlake_dp_detect], DPCD: 0000 [ 58.373922] [drm:output_poll_execute], [CONNECTOR:26:DP-3] status updated from 2 to 2 [ 58.735087] [drm:intel_crtc_cursor_set], [ 72.350281] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.355698] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.363662] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.371151] [drm:ironlake_dp_detect], DPCD: 0000 [ 72.371760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.379671] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.387652] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.395151] [drm:ironlake_dp_detect], DPCD: 0000 [ 72.395753] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.403660] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.411638] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 72.419128] [drm:ironlake_dp_detect], DPCD: 0000 [ 72.452849] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 72.452852] [drm:intel_crt_detect], CRT not detected via hotplug [ 74.875228] EXT4-fs (dm-2): re-mounted. Opts: acl,user_xattr,commit=0 [ 74.879925] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0 [ 74.883195] EXT4-fs (dm-1): re-mounted. Opts: acl,user_xattr,commit=0 [ 75.623469] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 75.623480] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 75.913563] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 75.913568] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 76.073497] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 76.073501] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 85.325023] [drm:intel_panel_get_max_backlight], max backlight PWM = 4882 [ 85.325027] [drm:intel_panel_set_backlight], set backlight PWM = 4882 [ 93.691103] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 93.691109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 93.691122] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 93.691125] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 93.691128] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 93.691133] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 93.691280] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 93.691283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 93.691286] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 93.691289] [drm:intel_crt_detect], CRT not detected via hotplug [ 93.691290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 93.691293] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 93.691295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 93.691298] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 93.691299] [drm:intel_crt_detect], CRT not detected via hotplug [ 93.691301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 93.691305] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 93.691306] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 93.702453] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 93.702459] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 93.702462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 93.713927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 93.713976] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 93.713984] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 93.714497] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.721318] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.729337] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.736805] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.736818] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 93.736846] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 93.736853] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 93.737363] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.745283] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.753277] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.760790] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.760796] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 93.760818] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 93.760821] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 93.772089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 93.772102] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 93.772104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 93.783153] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 93.783161] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 93.783163] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 93.794683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 93.794699] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 93.794702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 93.805774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 93.805789] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 93.805792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 93.806298] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.817302] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.825302] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.832773] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.832786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 93.832817] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 93.832825] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 93.833337] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.841275] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.849303] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.856759] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.856772] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 93.856810] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 93.856818] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 93.857330] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.865251] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.873261] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.880743] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.880756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 93.880783] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 93.880790] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 93.881300] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.889253] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.897254] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.904725] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.904738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 93.920782] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 93.920799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 93.920829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 93.920833] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 93.920839] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 93.920846] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 93.920992] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 93.920995] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 93.920999] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 93.921001] [drm:intel_crt_detect], CRT not detected via hotplug [ 93.921003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 93.921005] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 93.921007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 93.921010] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 93.921012] [drm:intel_crt_detect], CRT not detected via hotplug [ 93.921013] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 93.921017] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 93.921019] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 93.932045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 93.932053] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 93.932055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 93.943083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 93.943100] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 93.943102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 93.943609] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.949214] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.957221] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.964703] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.964716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 93.964743] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 93.964750] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 93.965262] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.973208] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.981212] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 93.988677] [drm:ironlake_dp_detect], DPCD: 0000 [ 93.988690] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 93.988726] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 93.988734] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 94.000142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 94.000155] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 94.000162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 94.011386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 94.011394] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 94.011396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 94.022397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 94.022402] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 94.022404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 94.033441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 94.033447] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 94.033449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 94.033954] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.041177] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.049157] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.056653] [drm:ironlake_dp_detect], DPCD: 0000 [ 94.056666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 94.056693] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 94.056700] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 94.057212] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.065167] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.073150] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.080642] [drm:ironlake_dp_detect], DPCD: 0000 [ 94.080655] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 94.080701] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 94.080708] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 94.081220] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.089155] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.097139] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.104631] [drm:ironlake_dp_detect], DPCD: 0000 [ 94.104644] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 94.104671] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 94.104678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 94.105190] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.113146] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.121127] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 94.128618] [drm:ironlake_dp_detect], DPCD: 0000 [ 94.128630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 96.671220] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 96.671235] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 96.671269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 96.671276] [drm:drm_mode_debug_printmodeline], Modeline 28:"1600x900" 60 114060 1600 1648 1680 2044 900 902 907 930 0x48 0x9 [ 96.671287] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x900" 40 74090 1600 1648 1680 1992 900 902 907 930 0x40 0x9 [ 96.671300] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 96.671591] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 96.671599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 96.671608] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 96.671615] [drm:intel_crt_detect], CRT not detected via hotplug [ 96.671621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 96.671630] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 96.671636] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 96.671642] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 96.671648] [drm:intel_crt_detect], CRT not detected via hotplug [ 96.671654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 96.671666] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 96.671672] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 96.683021] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 96.683024] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 96.683025] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 96.694174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 96.694191] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 96.694193] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 96.694700] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.699880] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.707869] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.715358] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.715362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 96.715379] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 96.715382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 96.715888] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.723864] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.731863] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.739411] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.739448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 96.739495] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 96.739503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 96.751132] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 96.751170] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 96.751179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 96.762449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 96.762461] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 96.762463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 96.773709] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 96.773720] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 96.773722] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] [ 96.784749] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:HDMI-A-3] disconnected [ 96.784759] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 96.784761] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 96.785267] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.791821] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.799889] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.807320] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.807337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 96.807372] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 96.807383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] [ 96.807897] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.815825] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.823839] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.831289] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.831300] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-2] disconnected [ 96.831337] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 96.831345] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 96.831865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.839793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.847805] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.855287] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.855301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 96.855327] [drm:drm_mode_getconnector], [CONNECTOR:26:?] [ 96.855335] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] [ 96.855858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.863788] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.871793] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 96.879273] [drm:ironlake_dp_detect], DPCD: 0000 [ 96.879286] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:DP-3] disconnected [ 101.118849] [drm:intel_crtc_cursor_set], [ 101.118853] [drm:intel_crtc_cursor_set], cursor off [ 103.687990] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 103.688003] [drm:intel_crt_detect], CRT not detected via hotplug [ 103.688010] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [ 103.699443] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [ 103.699958] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.708553] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.716479] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.723957] [drm:ironlake_dp_detect], DPCD: 0000 [ 103.723970] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [ 103.735400] [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [ 103.746843] [drm:output_poll_execute], [CONNECTOR:23:HDMI-A-3] status updated from 2 to 2 [ 103.747356] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.752443] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.760464] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.767959] [drm:ironlake_dp_detect], DPCD: 0000 [ 103.767974] [drm:output_poll_execute], [CONNECTOR:24:DP-2] status updated from 2 to 2 [ 103.768493] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.777840] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.784434] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 103.791923] [drm:ironlake_dp_detect], DPCD: 0000 [ 103.791936] [drm:output_poll_execute], [CONNECTOR:26:DP-3] status updated from 2 to 2 [ 104.113488] [drm:intel_crtc_cursor_set], [ 105.755741] fuse init (API version 7.17) [ 107.561950] [drm:intel_crtc_cursor_set], [ 107.561954] [drm:intel_crtc_cursor_set], cursor off
