Macbook Pro Retina display problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 31, 2012 at 03:00:52PM +1000, Dave Airlie wrote:
> On Tue, Jul 31, 2012 at 1:41 PM, Greg KH <gregkh at linuxfoundation.org> wrote:
> > On Tue, Jul 31, 2012 at 12:06:28PM +1000, Dave Airlie wrote:
> >> On Tue, Jul 31, 2012 at 8:33 AM, Greg KH <gregkh at linuxfoundation.org> wrote:
> >> > Hi all,
> >> >
> >> > I'm trying to the the $Subject laptop up and running using the built-in
> >> > Intel graphics chip:
> >> >
> >> > 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
> >> >         Subsystem: Apple Inc. Device 00f7
> >> >         Flags: bus master, fast devsel, latency 0, IRQ 53
> >> >         Memory at c1400000 (64-bit, non-prefetchable) [size=4M]
> >> >         Memory at b0000000 (64-bit, prefetchable) [size=256M]
> >> >         I/O ports at 3000 [size=64]
> >> >         Expansion ROM at <unassigned> [disabled]
> >> >         Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >> >         Capabilities: [d0] Power Management version 2
> >> >         Capabilities: [a4] PCI Advanced Features
> >> >         Kernel driver in use: i915
> >> >
> >> > And it seems that the xorg Intel driver just doesn't recognize it at
> >> > all.
> >> >
> >> > Below is my Xorg.0.log file.  I'm using a 3.5.0 kernel (with a few minor
> >> > hardware patches for other bits of this laptop that don't work with
> >> > 3.5.0, but no changes to the graphics drivers.)
> >> >
> >> > Any ideas or patches I can try out?
> >>
> >> try writing an xorg.conf with a BusID in it and see if it works, most
> >> likely the primary boot_vga detection is busted.
> >
> > Ah, I did that previously, it gave me a black screen and locked up.
> > I'll get the log from that tomorrow and send it here.
> >
> > Note, we are switching from EFI framebuffer mode, so could that be an
> > issue as well?
> >
> > And, just to make it fun, this laptop also has an nvidia chip in it, but
> > someone else is working on getting the nouveau driver working on it, I
> > was trying to stay away from that mess :)
> 
> Yeah the problem is most likely that the nvidia is connected to the screen :-)

I think so, the log below shows that the Intel driver can't find any
displays, if I'm reading it right.

> I think mjg59 has been working on some stuff in this area lately as well.

I see his PCI patches on linux-pci for something that might look helpful
here, although it's in relation to the radeon driver, so maybe not.
I'll give it a try though, and I've asked him what he tested the patches
on.

Anything else I can try?

greg k-h

[   223.752] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[   223.788] 
X.Org X Server 1.12.99.903 (1.13.0 RC 3)
Release Date: 2012-07-25
[   223.896] X Protocol Version 11, Revision 0
[   223.931] Build Operating System: Linux 3.5.0gregkh+ x86_64 Gentoo
[   223.968] Current Operating System: Linux mb.kroah.org 3.5.0gregkh-drm+ #10 SMP Mon Jul 30 15:52:40 PDT 2012 x86_64
[   223.968] Kernel command line: root=/dev/sda2 rootwait root=/dev/sda2 rootwait
[   224.041] Build Date: 26 July 2012  09:03:46PM
[   224.077]  
[   224.114] Current version of pixman: 0.26.2
[   224.186] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   224.186] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   224.332] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 31 16:37:22 2012
[   224.368] (==) Using config file: "/etc/X11/xorg.conf"
[   224.404] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   224.404] (==) No Layout section.  Using the first Screen section.
[   224.404] (==) No screen section available. Using defaults.
[   224.404] (**) |-->Screen "Default Screen Section" (0)
[   224.404] (**) |   |-->Monitor "<default monitor>"
[   224.404] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   224.404] (**) |   |-->Device "Card0"
[   224.404] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   224.404] (==) Automatically adding devices
[   224.404] (==) Automatically enabling devices
[   224.404] (==) Automatically adding GPU devices
[   224.404] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[   224.404] 	Entry deleted from font path.
[   224.404] (==) FontPath set to:
	
[   224.404] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   224.405] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   224.405] (II) Loader magic: 0x84dc00
[   224.405] (II) Module ABI versions:
[   224.405] 	X.Org ANSI C Emulation: 0.4
[   224.405] 	X.Org Video Driver: 13.0
[   224.405] 	X.Org XInput driver : 18.0
[   224.405] 	X.Org Server Extension : 6.0
[   224.405] (II) config/udev: Adding drm device (/dev/dri/card0)
[   224.406] (--) PCI: (0:0:2:0) 8086:0166:106b:00f7 rev 9, Mem @ 0xc1400000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
[   224.406] (--) PCI:*(0:1:0:0) 10de:0fd5:106b:00f2 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[   224.406] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   224.441] Initializing built-in extension Generic Event Extension
[   224.474] Initializing built-in extension SHAPE
[   224.508] Initializing built-in extension MIT-SHM
[   224.541] Initializing built-in extension XInputExtension
[   224.575] Initializing built-in extension XTEST
[   224.608] Initializing built-in extension BIG-REQUESTS
[   224.641] Initializing built-in extension SYNC
[   224.675] Initializing built-in extension XKEYBOARD
[   224.709] Initializing built-in extension XC-MISC
[   224.741] Initializing built-in extension XINERAMA
[   224.773] Initializing built-in extension XFIXES
[   224.805] Initializing built-in extension RENDER
[   224.837] Initializing built-in extension RANDR
[   224.869] Initializing built-in extension COMPOSITE
[   224.901] Initializing built-in extension DAMAGE
[   224.933] Initializing built-in extension MIT-SCREEN-SAVER
[   224.965] Initializing built-in extension DOUBLE-BUFFER
[   224.997] Initializing built-in extension RECORD
[   225.028] Initializing built-in extension DPMS
[   225.057] Initializing built-in extension X-Resource
[   225.085] Initializing built-in extension XVideo
[   225.113] Initializing built-in extension XVideo-MotionCompensation
[   225.140] Initializing built-in extension XFree86-VidModeExtension
[   225.167] Initializing built-in extension XFree86-DGA
[   225.193] Initializing built-in extension XFree86-DRI
[   225.219] Initializing built-in extension DRI2
[   225.219] (II) LoadModule: "glx"
[   225.219] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   225.219] (II) Module glx: vendor="X.Org Foundation"
[   225.219] 	compiled for 1.12.99.903, module version = 1.0.0
[   225.219] 	ABI class: X.Org Server Extension, version 6.0
[   225.219] (==) AIGLX enabled
[   225.245] Loading extension GLX
[   225.245] (II) LoadModule: "intel"
[   225.245] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   225.245] (II) Module intel: vendor="X.Org Foundation"
[   225.245] 	compiled for 1.12.99.903, module version = 2.20.2
[   225.245] 	Module class: X.Org Video Driver
[   225.245] 	ABI class: X.Org Video Driver, version 13.0
[   225.246] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[   225.246] (--) using VT number 7

[   225.439] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   225.439] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   225.439] (==) intel(0): RGB weight 888
[   225.439] (==) intel(0): Default visual is TrueColor
[   225.439] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   225.439] (**) intel(0): Relaxed fencing enabled
[   225.439] (**) intel(0): Wait on SwapBuffers? enabled
[   225.439] (**) intel(0): Triple buffering? enabled
[   225.439] (**) intel(0): Framebuffer tiled
[   225.439] (**) intel(0): Pixmaps tiled
[   225.439] (**) intel(0): 3D buffers tiled
[   225.439] (**) intel(0): SwapBuffers wait enabled
[   225.439] (==) intel(0): video overlay key set to 0x101fe
[   225.439] (II) intel(0): Output VGA1 has no monitor section
[   225.439] (II) intel(0): EDID for output VGA1
[   225.439] (II) intel(0): Output VGA1 disconnected
[   225.439] (WW) intel(0): No outputs definitely connected, trying again...
[   225.439] (II) intel(0): Output VGA1 disconnected
[   225.439] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[   225.439] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   225.439] (II) intel(0): Kernel page flipping support detected, enabling
[   225.439] (==) intel(0): DPI set to (96, 96)
[   225.439] (II) Loading sub module "fb"
[   225.439] (II) LoadModule: "fb"
[   225.439] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   225.440] (II) Module fb: vendor="X.Org Foundation"
[   225.440] 	compiled for 1.12.99.903, module version = 1.0.0
[   225.440] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   225.440] (II) Loading sub module "dri2"
[   225.440] (II) LoadModule: "dri2"
[   225.440] (II) Module "dri2" already built-in
[   225.440] (==) Depth 24 pixmap format is 32 bpp
[   225.440] (II) intel(0): [DRI2] Setup complete
[   225.440] (II) intel(0): [DRI2]   DRI driver: i965
[   225.440] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   225.440] (II) UXA(0): Driver registered support for the following operations:
[   225.440] (II)         solid
[   225.440] (II)         copy
[   225.440] (II)         composite (RENDER acceleration)
[   225.440] (II)         put_image
[   225.440] (II)         get_image
[   225.440] (==) intel(0): Backing store disabled
[   225.440] (==) intel(0): Silken mouse enabled
[   225.440] (II) intel(0): Initializing HW Cursor
[   225.440] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   225.440] (==) intel(0): DPMS enabled
[   225.440] (==) intel(0): Intel XvMC decoder enabled
[   225.440] (II) intel(0): Set up textured video
[   225.440] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   225.440] (II) intel(0): direct rendering: DRI2 Enabled
[   225.440] (==) intel(0): hotplug detection: "enabled"
[   225.440] (--) RandR disabled
[   225.445] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   225.445] (II) AIGLX: enabled GLX_INTEL_swap_event
[   225.445] (II) AIGLX: enabled GLX_ARB_create_context
[   225.445] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   225.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   225.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   225.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   225.445] (II) AIGLX: Loaded and initialized i965
[   225.445] (II) GLX: Initialized DRI2 GL provider for screen 0
[   225.457] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   225.457] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   225.457] (II) LoadModule: "evdev"
[   225.457] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   225.457] (II) Module evdev: vendor="X.Org Foundation"
[   225.457] 	compiled for 1.12.99.903, module version = 2.7.1
[   225.457] 	Module class: X.Org XInput Driver
[   225.457] 	ABI class: X.Org XInput driver, version 18.0
[   225.457] (II) Using input driver 'evdev' for 'Power Button'
[   225.457] (**) Power Button: always reports core events
[   225.457] (**) evdev: Power Button: Device: "/dev/input/event3"
[   225.458] (--) evdev: Power Button: Vendor 0 Product 0x1
[   225.458] (--) evdev: Power Button: Found keys
[   225.458] (II) evdev: Power Button: Configuring as keyboard
[   225.458] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   225.458] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   225.458] (**) Option "xkb_rules" "evdev"
[   225.458] (**) Option "xkb_model" "evdev"
[   225.458] (**) Option "xkb_layout" "us"
[   225.468] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   225.468] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   225.468] (II) Using input driver 'evdev' for 'Video Bus'
[   225.468] (**) Video Bus: always reports core events
[   225.468] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   225.468] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   225.468] (--) evdev: Video Bus: Found keys
[   225.468] (II) evdev: Video Bus: Configuring as keyboard
[   225.468] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[   225.468] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   225.468] (**) Option "xkb_rules" "evdev"
[   225.468] (**) Option "xkb_model" "evdev"
[   225.468] (**) Option "xkb_layout" "us"
[   225.469] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   225.469] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   225.469] (II) Using input driver 'evdev' for 'Video Bus'
[   225.469] (**) Video Bus: always reports core events
[   225.469] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   225.469] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   225.469] (--) evdev: Video Bus: Found keys
[   225.469] (II) evdev: Video Bus: Configuring as keyboard
[   225.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input4/event4"
[   225.469] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   225.469] (**) Option "xkb_rules" "evdev"
[   225.469] (**) Option "xkb_model" "evdev"
[   225.469] (**) Option "xkb_layout" "us"
[   225.469] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   225.469] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   225.469] (II) Using input driver 'evdev' for 'Power Button'
[   225.469] (**) Power Button: always reports core events
[   225.469] (**) evdev: Power Button: Device: "/dev/input/event1"
[   225.469] (--) evdev: Power Button: Vendor 0 Product 0x1
[   225.469] (--) evdev: Power Button: Found keys
[   225.469] (II) evdev: Power Button: Configuring as keyboard
[   225.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[   225.469] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   225.469] (**) Option "xkb_rules" "evdev"
[   225.469] (**) Option "xkb_model" "evdev"
[   225.469] (**) Option "xkb_layout" "us"
[   225.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   225.469] (II) No input driver specified, ignoring this device.
[   225.469] (II) This device may have been added with another device file.
[   225.469] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   225.469] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   225.469] (II) Using input driver 'evdev' for 'Sleep Button'
[   225.469] (**) Sleep Button: always reports core events
[   225.469] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   225.469] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   225.469] (--) evdev: Sleep Button: Found keys
[   225.469] (II) evdev: Sleep Button: Configuring as keyboard
[   225.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   225.469] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[   225.469] (**) Option "xkb_rules" "evdev"
[   225.469] (**) Option "xkb_model" "evdev"
[   225.469] (**) Option "xkb_layout" "us"
[   225.470] (II) config/udev: Adding drm device (/dev/dri/card0)
[   225.470] (II) config/udev: Adding input device HID 05ac:820a (/dev/input/event8)
[   225.470] (**) HID 05ac:820a: Applying InputClass "evdev keyboard catchall"
[   225.470] (II) Using input driver 'evdev' for 'HID 05ac:820a'
[   225.470] (**) HID 05ac:820a: always reports core events
[   225.470] (**) evdev: HID 05ac:820a: Device: "/dev/input/event8"
[   225.470] (--) evdev: HID 05ac:820a: Vendor 0x5ac Product 0x820a
[   225.470] (--) evdev: HID 05ac:820a: Found keys
[   225.470] (II) evdev: HID 05ac:820a: Configuring as keyboard
[   225.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.1/4-1.8.1.1:1.0/input/input8/event8"
[   225.470] (II) XINPUT: Adding extended input device "HID 05ac:820a" (type: KEYBOARD, id 11)
[   225.470] (**) Option "xkb_rules" "evdev"
[   225.470] (**) Option "xkb_model" "evdev"
[   225.470] (**) Option "xkb_layout" "us"
[   225.470] (II) config/udev: Adding input device HID 05ac:820b (/dev/input/event9)
[   225.470] (**) HID 05ac:820b: Applying InputClass "evdev pointer catchall"
[   225.470] (II) Using input driver 'evdev' for 'HID 05ac:820b'
[   225.470] (**) HID 05ac:820b: always reports core events
[   225.470] (**) evdev: HID 05ac:820b: Device: "/dev/input/event9"
[   225.470] (--) evdev: HID 05ac:820b: Vendor 0x5ac Product 0x820b
[   225.470] (--) evdev: HID 05ac:820b: Found 3 mouse buttons
[   225.470] (--) evdev: HID 05ac:820b: Found relative axes
[   225.470] (--) evdev: HID 05ac:820b: Found x and y relative axes
[   225.470] (II) evdev: HID 05ac:820b: Configuring as mouse
[   225.470] (**) evdev: HID 05ac:820b: YAxisMapping: buttons 4 and 5
[   225.470] (**) evdev: HID 05ac:820b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   225.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.2/4-1.8.1.2:1.0/input/input9/event9"
[   225.470] (II) XINPUT: Adding extended input device "HID 05ac:820b" (type: MOUSE, id 12)
[   225.470] (II) evdev: HID 05ac:820b: initialized for relative axes.
[   225.470] (**) HID 05ac:820b: (accel) keeping acceleration scheme 1
[   225.470] (**) HID 05ac:820b: (accel) acceleration profile 0
[   225.470] (**) HID 05ac:820b: (accel) acceleration factor: 2.000
[   225.470] (**) HID 05ac:820b: (accel) acceleration threshold: 4
[   225.470] (II) config/udev: Adding input device HID 05ac:820b (/dev/input/mouse1)
[   225.470] (II) No input driver specified, ignoring this device.
[   225.470] (II) This device may have been added with another device file.
[   225.470] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event7)
[   225.470] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[   225.470] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[   225.471] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[   225.471] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event7"
[   225.471] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x262
[   225.471] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[   225.471] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[   225.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.0/input/input7/event7"
[   225.471] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 13)
[   225.471] (**) Option "xkb_rules" "evdev"
[   225.471] (**) Option "xkb_model" "evdev"
[   225.471] (**) Option "xkb_layout" "us"
[   225.471] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[   225.471] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[   225.471] (II) Using input driver 'evdev' for 'bcm5974'
[   225.471] (**) bcm5974: always reports core events
[   225.471] (**) evdev: bcm5974: Device: "/dev/input/event6"
[   225.472] (--) evdev: bcm5974: Vendor 0x5ac Product 0x262
[   225.472] (--) evdev: bcm5974: Found 1 mouse buttons
[   225.472] (--) evdev: bcm5974: Found absolute axes
[   225.472] (--) evdev: bcm5974: Found absolute multitouch axes
[   225.472] (--) evdev: bcm5974: Found x and y absolute axes
[   225.472] (--) evdev: bcm5974: Found absolute touchpad.
[   225.472] (II) evdev: bcm5974: Configuring as touchpad
[   225.472] (**) evdev: bcm5974: YAxisMapping: buttons 4 and 5
[   225.472] (**) evdev: bcm5974: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   225.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.2/input/input6/event6"
[   225.472] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 14)
[   225.472] (II) evdev: bcm5974: initialized for absolute axes.
[   225.472] (**) bcm5974: (accel) keeping acceleration scheme 1
[   225.472] (**) bcm5974: (accel) acceleration profile 0
[   225.472] (**) bcm5974: (accel) acceleration factor: 2.000
[   225.472] (**) bcm5974: (accel) acceleration threshold: 4
[   225.472] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[   225.472] (II) No input driver specified, ignoring this device.
[   225.472] (II) This device may have been added with another device file.
[   227.080] (II) evdev: bcm5974: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: HID 05ac:820b: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: HID 05ac:820a: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Sleep Button: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Power Button: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Video Bus: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Video Bus: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.080] (II) evdev: Power Button: Close
[   227.080] (II) UnloadModule: "evdev"
[   227.496] Server terminated successfully (0). Closing log file.


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux