Looks like this one can go first. 2012/7/11 Daniel Vetter <daniel.vetter at ffwll.ch>: > Splitting them up between pch and gmch variants just makes it harder > to find things. Especially since the hotplug bits are actually valid > on earlier chips, too. > > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch> > --- > drivers/gpu/drm/i915/i915_reg.h | 47 ++++++++++++++++++-------------------- > 1 files changed, 22 insertions(+), 25 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index e982900..c7e21bf 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -1546,12 +1546,34 @@ > > /* VGA port control */ > #define ADPA 0x61100 > +#define PCH_ADPA 0xe1100 > + > #define ADPA_DAC_ENABLE (1<<31) > #define ADPA_DAC_DISABLE 0 > #define ADPA_PIPE_SELECT_MASK (1<<30) > #define ADPA_PIPE_A_SELECT 0 > #define ADPA_PIPE_B_SELECT (1<<30) > #define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) > +/* CPT uses bits 29:31 for pch transcoder select */ It's actually 30:29. With that fixed: Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com> > +#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ > +#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) > +#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) > +#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) > +#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) > +#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) > +#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) > +#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) > +#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) > +#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) > +#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) > +#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) > +#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) > +#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) > +#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) > +#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) > +#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) > +#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) > +#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) > #define ADPA_USE_VGA_HVPOLARITY (1<<15) > #define ADPA_SETS_HVPOLARITY 0 > #define ADPA_VSYNC_CNTL_DISABLE (1<<11) > @@ -3886,31 +3908,6 @@ > #define FDI_PLL_CTL_1 0xfe000 > #define FDI_PLL_CTL_2 0xfe004 > > -/* CRT */ > -#define PCH_ADPA 0xe1100 > -#define ADPA_TRANS_SELECT_MASK (1<<30) > -#define ADPA_TRANS_A_SELECT 0 > -#define ADPA_TRANS_B_SELECT (1<<30) > -#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ > -#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) > -#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) > -#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) > -#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) > -#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) > -#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) > -#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) > -#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) > -#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) > -#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) > -#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) > -#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) > -#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) > -#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) > -#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) > -#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) > -#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) > -#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) > - > /* or SDVOB */ > #define HDMIB 0xe1140 > #define PORT_ENABLE (1 << 31) > -- > 1.7.7.6 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Paulo Zanoni
