[PATCH 34/43] drm/i915: Add interfaces to read out encoder/connector hw state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It is all glorious if we try really hard to only enable an entire
display pipe to ensure that everyting happens in the right order. But
if we don't know the output configuration when the driver takes over,
this will all be for vain because we'll make the hw angry right on the
first modeset.

Hence we need to be able to read out the current hw state, so that we
can properly tear down the current hw state on the first modeset.
Obviously this is also a nice preparation for the fastboot work, where
we try to avoid the modeset on driver load if it matches what the hw
is currently using.

Furthermore we'll be using these functions to cross-check the actual
hw state with what we think it should be, to ensure that the modeset
state machine actually works as advertised.

This patch only contains the interface definitions and a little helper
for the simple case.

Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c |   11 +++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |    8 ++++++++
 2 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e01cd09..d423b9a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3541,6 +3541,17 @@ void intel_connector_dpms(struct drm_connector *connector, int mode)
 		encoder->connectors_active = false;
 }
 
+/* Simple connector->get_hw_state implementation for encoders that support only
+ * one connector and no cloning and hence the encoder state determines the state
+ * of the connector. */
+bool intel_connector_get_hw_state(struct intel_connector *connector)
+{
+	enum pipe pipe;
+	struct intel_encoder *encoder = connector->encoder;
+
+	return encoder->get_hw_state(encoder, &pipe);
+}
+
 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8714f00..45dd067 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -142,12 +142,19 @@ struct intel_encoder {
 	void (*hot_plug)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
 	void (*disable)(struct intel_encoder *);
+	/* Read out the current hw state of this connector, returning true if
+	 * the encoder is active. If the encoder is enabled it also set the pipe
+	 * it is connected to in the pipe parameter. */
+	bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
 	int crtc_mask;
 };
 
 struct intel_connector {
 	struct drm_connector base;
 	struct intel_encoder *encoder;
+	/* Reads out the current hw, returning true if the connector is enabled
+	 * and active (i.e. dpms ON state). */
+	bool (*get_hw_state)(struct intel_connector *);
 };
 
 struct intel_crtc {
@@ -391,6 +398,7 @@ extern void intel_encoder_disable(struct drm_encoder *encoder);
 extern void intel_encoder_destroy(struct drm_encoder *encoder);
 extern void intel_encoder_dpms(struct intel_encoder *encoder, int mode);
 extern void intel_connector_dpms(struct drm_connector *, int mode);
+extern bool intel_connector_get_hw_state(struct intel_connector *connector);
 
 static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
 {
-- 
1.7.7.6



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux