Splitting them up between pch and gmch variants just makes it harder to find things. Especially since the hotplug bits are actually valid on earlier chips, too. Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch> --- drivers/gpu/drm/i915/i915_reg.h | 47 ++++++++++++++++++-------------------- 1 files changed, 22 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 524c70e..052d470 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1542,12 +1542,34 @@ /* VGA port control */ #define ADPA 0x61100 +#define PCH_ADPA 0xe1100 + #define ADPA_DAC_ENABLE (1<<31) #define ADPA_DAC_DISABLE 0 #define ADPA_PIPE_SELECT_MASK (1<<30) #define ADPA_PIPE_A_SELECT 0 #define ADPA_PIPE_B_SELECT (1<<30) #define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) +/* CPT uses bits 29:31 for pch transcoder select */ +#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ +#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) +#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) +#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) +#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) +#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) +#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) +#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) +#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) +#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) +#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) +#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) +#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) #define ADPA_USE_VGA_HVPOLARITY (1<<15) #define ADPA_SETS_HVPOLARITY 0 #define ADPA_VSYNC_CNTL_DISABLE (1<<11) @@ -3878,31 +3900,6 @@ #define FDI_PLL_CTL_1 0xfe000 #define FDI_PLL_CTL_2 0xfe004 -/* CRT */ -#define PCH_ADPA 0xe1100 -#define ADPA_TRANS_SELECT_MASK (1<<30) -#define ADPA_TRANS_A_SELECT 0 -#define ADPA_TRANS_B_SELECT (1<<30) -#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ -#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) -#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) -#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) -#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) -#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) -#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) -#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) -#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) -#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) -#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) -#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) -#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) - /* or SDVOB */ #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) -- 1.7.7.6
