Implements the HDCP2.2 repeaters authentication steps such as verifying
the downstream topology and sending stream management information.
v2:
Rebased.
v3:
No Changes.
v4:
-EINVAL is returned for topology error and rollover scenario.
Endianness conversion func from drm_hdcp.h is used [Uma]
v5:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v6:
Redefined the mei service functions as per comp redesign.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_hdcp.c | 171 ++++++++++++++++++++++++++++++++++++++
include/drm/drm_hdcp.h | 15 ++++
2 files changed, 186 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
index ee1e06bac175..a08d80c710d7 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -1144,6 +1144,56 @@ static int hdcp2_prepare_skey(struct intel_connector *connector,
return ret;
}
+static int
+hdcp2_verify_rep_topology_prepare_ack(
+ struct intel_connector *connector,
+ struct hdcp2_rep_send_receiverid_list *rep_topology,
+ struct hdcp2_rep_send_ack *rep_send_ack)
+{
+ struct mei_hdcp_data *data = &connector->hdcp.mei_data;
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+ struct i915_component_master *comp = dev_priv->comp_master;
+ int ret;
+
+ if (!comp)
+ return -EINVAL;
+
+ if (!comp->hdcp_ops || !comp->mei_cldev || data->port == INVALID_PORT)
+ return -EINVAL;
+
+ ret = comp->hdcp_ops->repeater_check_flow_prepare_ack(comp->mei_cldev,
+ data,
+ rep_topology,
+ rep_send_ack);
+ if (ret < 0)
+ comp->hdcp_ops->close_hdcp_session(comp->mei_cldev, data);
+
+ return ret;
+}
+
+static int
+hdcp2_verify_mprime(struct intel_connector *connector,
+ struct hdcp2_rep_stream_ready *stream_ready)
+{
+ struct mei_hdcp_data *data = &connector->hdcp.mei_data;
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+ struct i915_component_master *comp = dev_priv->comp_master;
+ int ret;
+
+ if (!comp)
+ return -EINVAL;
+
+ if (!comp->hdcp_ops || !comp->mei_cldev || data->port == INVALID_PORT)
+ return -EINVAL;
+
+ ret = comp->hdcp_ops->verify_mprime(comp->mei_cldev, data,
+ stream_ready);
+ if (ret < 0)
+ comp->hdcp_ops->close_hdcp_session(comp->mei_cldev, data);
+
+ return ret;
+}
+
static int hdcp2_authenticate_port(struct intel_connector *connector)
{
struct mei_hdcp_data *data = &connector->hdcp.mei_data;
@@ -1319,6 +1369,121 @@ static int hdcp2_session_key_exchange(struct intel_connector *connector)
return 0;
}
+static
+int hdcp2_propagate_stream_management_info(struct intel_connector *connector)
+{
+ struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_stream_manage stream_manage;
+ struct hdcp2_rep_stream_ready stream_ready;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->shim;
+ int ret;
+
+ /* Prepare RepeaterAuth_Stream_Manage msg */
+ msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE;
+ reverse_endianness(msgs.stream_manage.seq_num_m, HDCP_2_2_SEQ_NUM_LEN,
+ (u8 *)&hdcp->seq_num_m);
+
+ /* K no of streams is fixed as 1. Stored as big-endian. */
+ msgs.stream_manage.k = __swab16(1);
+
+ /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
+ msgs.stream_manage.streams[0].stream_id = 0;
+ msgs.stream_manage.streams[0].stream_type = hdcp->content_type;
+
+ /* Send it to Repeater */
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.stream_manage,
+ sizeof(msgs.stream_manage));
+ if (ret < 0)
+ return ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port, HDCP_2_2_REP_STREAM_READY,
+ &msgs.stream_ready, sizeof(msgs.stream_ready));
+ if (ret < 0)
+ return ret;
+
+ hdcp->mei_data.seq_num_m = hdcp->seq_num_m;
+ hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
+
+ ret = hdcp2_verify_mprime(connector, &msgs.stream_ready);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_m++;
+
+ if (hdcp->seq_num_m > HDCP_2_2_SEQ_NUM_MAX) {
+ DRM_DEBUG_KMS("seq_num_m roll over.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static
+int hdcp2_authenticate_repeater_topology(struct intel_connector *connector)
+{
+ struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_send_receiverid_list recvid_list;
+ struct hdcp2_rep_send_ack rep_ack;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->shim;
+ uint8_t *rx_info;
+ uint32_t seq_num_v;
+ int ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port, HDCP_2_2_REP_SEND_RECVID_LIST,
+ &msgs.recvid_list, sizeof(msgs.recvid_list));
+ if (ret < 0)
+ return ret;
+
+ rx_info = msgs.recvid_list.rx_info;
+
+ if (HDCP_2_2_MAX_CASCADE_EXCEEDED(rx_info[1]) ||
+ HDCP_2_2_MAX_DEVS_EXCEEDED(rx_info[1])) {
+ DRM_DEBUG_KMS("Topology Max Size Exceeded\n");
+ return -EINVAL;
+ }
+
+ /* Converting and Storing the seq_num_v to local variable as DWORD */
+ reverse_endianness((u8 *)&seq_num_v, HDCP_2_2_SEQ_NUM_LEN,
+ msgs.recvid_list.seq_num_v);
+
+ if (seq_num_v < hdcp->seq_num_v) {
+ /* Roll over of the seq_num_v from repeater. Reauthenticate. */
+ DRM_DEBUG_KMS("Seq_num_v roll over.\n");
+ return -EINVAL;
+ }
+
+ ret = hdcp2_verify_rep_topology_prepare_ack(connector,
+ &msgs.recvid_list,
+ &msgs.rep_ack);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_v = seq_num_v;
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.rep_ack,
+ sizeof(msgs.rep_ack));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int hdcp2_authenticate_repeater(struct intel_connector *connector)
+{
+ int ret;
+
+ ret = hdcp2_authenticate_repeater_topology(connector);
+ if (ret < 0)
+ return ret;
+
+ return hdcp2_propagate_stream_management_info(connector);
+}
+
static int hdcp2_authenticate_sink(struct intel_connector *connector)
{
struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
@@ -1360,6 +1525,12 @@ static int hdcp2_authenticate_sink(struct intel_connector *connector)
sizeof(stream_type_msg));
if (ret < 0)
return ret;
+ } else if (hdcp->is_repeater) {
+ ret = hdcp2_authenticate_repeater(connector);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Repeater Auth Failed. Err: %d\n", ret);
+ return ret;
+ }
}
hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
index 2b4cfb0b7324..c01cdb1d848d 100644
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -252,4 +252,19 @@ struct hdcp2_dp_errata_stream_type {
#define HDCP_2_2_HDMI_RXSTATUS_READY(x) ((x) & BIT(2))
#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3))
+/*
+ * Library functions for endianness are aligned for 16/32/64 bits.
+ * But hdcp sequence numbers are 24bits. So for their Byte swapping,
+ * a conversion function is developed.
+ */
+static inline void reverse_endianness(u8 *dest, size_t sz, u8 *src)
+{
+ u32 index;
+
+ if (!sz || sz > sizeof(u32))
+ return;
+ for (index = 0; index < sz; index++)
+ dest[sz - index - 1] = src[index];
+}
+
#endif
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
