From: Ville Syrj?l? <ville.syrjala at linux.intel.com>
Split the update_plane() codepath into two separate steps. The first
step checkis and clips the plane, and the second step actually commits
the changes to the hardware. This allows the atomic modesetting code
to perform all checks before clobering hardware state.
The update_plane() hook is reduced to a thin wrapper calling both check
and commit functions.
Buffer (un)pinning is still being performed in the commit step. This
needs to be changed as well, so that the atomic modesetting code can
try to pin all new buffers before touching the hardware.
Signed-off-by: Ville Syrj?l? <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_drv.h | 15 +-
drivers/gpu/drm/i915/intel_sprite.c | 411 ++++++++++++++++++++++-------------
2 files changed, 266 insertions(+), 160 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 16770cb..0d7c2fc 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -231,6 +231,15 @@ struct intel_crtc {
uint32_t ddi_pll_sel;
};
+struct intel_plane_coords {
+ /* disabled or fully clipped? */
+ bool visible;
+ /* coordinates clipped against pipe dimensions */
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w, crtc_h;
+ uint32_t src_x, src_y, src_w, src_h;
+};
+
struct intel_plane {
struct drm_plane base;
enum pipe pipe;
@@ -240,11 +249,7 @@ struct intel_plane {
u32 lut_r[1024], lut_g[1024], lut_b[1024];
void (*update_plane)(struct drm_plane *plane,
struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t x, uint32_t y,
- uint32_t src_w, uint32_t src_h);
+ const struct intel_plane_coords *clip);
void (*disable_plane)(struct drm_plane *plane);
int (*update_colorkey)(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 77ca0da..d64cefd 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -36,16 +36,189 @@
#include <drm/i915_drm.h>
#include "i915_drv.h"
+static bool
+format_is_yuv(uint32_t format)
+{
+ switch (format) {
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ case DRM_FORMAT_YVYU:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void intel_clip_plane(const struct drm_plane *plane,
+ const struct drm_crtc *crtc,
+ const struct drm_framebuffer *fb,
+ struct intel_plane_coords *coords)
+{
+ const struct intel_plane *intel_plane = to_intel_plane(plane);
+ const struct drm_display_mode *mode = &crtc->mode;
+ int hscale, vscale;
+ struct drm_region src = {
+ .x1 = coords->src_x,
+ .x2 = coords->src_x + coords->src_w,
+ .y1 = coords->src_y,
+ .y2 = coords->src_y + coords->src_h,
+ };
+ struct drm_region dst = {
+ .x1 = coords->crtc_x,
+ .x2 = coords->crtc_x + coords->crtc_w,
+ .y1 = coords->crtc_y,
+ .y2 = coords->crtc_y + coords->crtc_h,
+ };
+ const struct drm_region clip = {
+ .x2 = mode->hdisplay,
+ .y2 = mode->vdisplay,
+ };
+
+ hscale = drm_calc_hscale(&src, &dst, 1, intel_plane->max_downscale << 16);
+ vscale = drm_calc_vscale(&src, &dst, 1, intel_plane->max_downscale << 16);
+
+ coords->visible = drm_region_clip_scaled(&src, &dst, &clip, hscale, vscale);
+
+ coords->crtc_x = dst.x1;
+ coords->crtc_y = dst.y1;
+ coords->crtc_w = drm_region_width(&dst);
+ coords->crtc_h = drm_region_height(&dst);
+
+ /* HW doesn't seem to like smaller sprite, even when scaling */
+ /* FIXME return an error instead? */
+ if (coords->crtc_w < 3 || coords->crtc_h < 3)
+ coords->visible = false;
+
+ /*
+ * Hardware doesn't handle subpixel coordinates.
+ * Round to nearest (macro)pixel boundary.
+ */
+ if (format_is_yuv(fb->pixel_format)) {
+ coords->src_x = ((src.x1 + 0x10000) >> 17) << 1;
+ coords->src_w = (((src.x2 + 0x10000) >> 17) << 1) - coords->src_x;
+ } else {
+ coords->src_x = (src.x1 + 0x8000) >> 16;
+ coords->src_w = ((src.x2 + 0x8000) >> 16) - coords->src_x;
+ }
+ coords->src_y = (src.y1 + 0x8000) >> 16;
+ coords->src_h = ((src.y2 + 0x8000) >> 16) - coords->src_y;
+
+ /* Account for minimum source size when scaling */
+ if (coords->visible && (coords->src_w != coords->crtc_w || coords->src_h != coords->crtc_h)) {
+ unsigned int min_w = format_is_yuv(fb->pixel_format) ? 4 : 3;
+
+ if (coords->src_w < min_w) {
+ coords->src_w = min_w;
+ if (coords->src_x > fb->width - coords->src_w)
+ coords->src_x = fb->width - coords->src_w;
+ }
+
+ /* FIXME interlacing */
+ if (coords->src_h < 3) {
+ coords->src_h = 3;
+ if (coords->src_y > fb->height - coords->src_h)
+ coords->src_y = fb->height - coords->src_h;
+ }
+ }
+}
+
+int intel_check_plane(const struct drm_plane *plane,
+ const struct drm_crtc *crtc,
+ const struct drm_framebuffer *fb,
+ struct intel_plane_coords *coords)
+{
+ const struct intel_plane *intel_plane = to_intel_plane(plane);
+
+ if (fb) {
+ /* FIXME copy-pasted. refactor common code in drm_crtc.c */
+ uint32_t fb_width = fb->width << 16;
+ uint32_t fb_height = fb->height << 16;
+ int i;
+
+ for (i = 0; i < plane->format_count; i++) {
+ if (plane->format_types[i] == fb->pixel_format)
+ break;
+ }
+ if (i == plane->format_count)
+ return -EINVAL;
+
+ if (coords->src_w > fb_width ||
+ coords->src_x > fb_width - coords->src_w ||
+ coords->src_h > fb_height ||
+ coords->src_y > fb_height - coords->src_h)
+ return -ENOSPC;
+
+ if (coords->crtc_w > INT_MAX ||
+ coords->crtc_x > INT_MAX - (int32_t) coords->crtc_w ||
+ coords->crtc_h > INT_MAX ||
+ coords->crtc_y > INT_MAX - (int32_t) coords->crtc_h)
+ return -ERANGE;
+
+ if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384)
+ return -EINVAL;
+
+ /* Sprite planes can be linear or x-tiled surfaces */
+ switch (to_intel_framebuffer(fb)->obj->tiling_mode) {
+ case I915_TILING_NONE:
+ case I915_TILING_X:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ if (crtc) {
+ const struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ /* Don't modify another pipe's plane */
+ if (intel_plane->pipe != intel_crtc->pipe)
+ return -EINVAL;
+ }
+
+ if (!fb || !crtc || !crtc->enabled) {
+ coords->visible = false;
+ return 0;
+ }
+
+ /*
+ * We may not have a scaler, eg. HSW does not have it any more
+ */
+ if (!intel_plane->can_scale && (((uint64_t) coords->crtc_w << 16) != coords->src_w ||
+ ((uint64_t) coords->crtc_h << 16) != coords->src_h))
+ return -EINVAL;
+
+ intel_clip_plane(plane, crtc, fb, coords);
+
+ /* Check size restrictions when scaling */
+ if (coords->visible && (coords->src_w != coords->crtc_w || coords->src_h != coords->crtc_h)) {
+ unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+
+ if (coords->src_w > 2048 || coords->src_h > 2048 ||
+ coords->src_w * cpp > 4096 - 64 || fb->pitches[0] > 4096)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static void
-ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t x, uint32_t y,
- uint32_t src_w, uint32_t src_h)
+ivb_update_plane(struct drm_plane *plane,
+ struct drm_framebuffer *fb,
+ const struct intel_plane_coords *coords)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ const struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
+ int crtc_x = coords->crtc_x;
+ int crtc_y = coords->crtc_y;
+ unsigned int crtc_w = coords->crtc_w;
+ unsigned int crtc_h = coords->crtc_h;
+ uint32_t x = coords->src_x;
+ uint32_t y = coords->src_y;
+ uint32_t src_w = coords->src_w;
+ uint32_t src_h = coords->src_h;
int pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
unsigned long sprsurf_offset, linear_offset;
@@ -218,15 +391,22 @@ ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
}
static void
-ilk_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t x, uint32_t y,
- uint32_t src_w, uint32_t src_h)
+ilk_update_plane(struct drm_plane *plane,
+ struct drm_framebuffer *fb,
+ const struct intel_plane_coords *coords)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ const struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
+ int crtc_x = coords->crtc_x;
+ int crtc_y = coords->crtc_y;
+ unsigned int crtc_w = coords->crtc_w;
+ unsigned int crtc_h = coords->crtc_h;
+ uint32_t x = coords->src_x;
+ uint32_t y = coords->src_y;
+ uint32_t src_w = coords->src_w;
+ uint32_t src_h = coords->src_h;
int pipe = intel_plane->pipe;
unsigned long dvssurf_offset, linear_offset;
u32 dvscntr, dvsscale;
@@ -407,151 +587,68 @@ ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
key->flags = I915_SET_COLORKEY_NONE;
}
-static bool
-format_is_yuv(uint32_t format)
-{
- switch (format) {
- case DRM_FORMAT_YUYV:
- case DRM_FORMAT_UYVY:
- case DRM_FORMAT_VYUY:
- case DRM_FORMAT_YVYU:
- return true;
- default:
- return false;
- }
-}
-
static int
-intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
+intel_disable_plane(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+ struct intel_plane *intel_plane = to_intel_plane(plane);
+ int ret = 0;
+
+ if (plane->crtc)
+ intel_enable_primary(plane->crtc);
+
+ intel_plane->disable_plane(plane);
+
+ if (!intel_plane->obj)
+ goto out;
+
+ mutex_lock(&dev->struct_mutex);
+ intel_unpin_fb_obj(intel_plane->obj);
+ intel_plane->obj = NULL;
+ mutex_unlock(&dev->struct_mutex);
+out:
+
+ return ret;
+}
+
+int
+intel_commit_plane(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ const struct intel_plane_coords *coords)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj = intel_fb->obj;
+ struct intel_framebuffer *intel_fb;
+ struct drm_i915_gem_object *obj;
struct drm_i915_gem_object *old_obj = intel_plane->obj;
int pipe = intel_plane->pipe;
- enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
- pipe);
- int ret = 0;
- int primary_w = crtc->mode.hdisplay, primary_h = crtc->mode.vdisplay;
+ int ret;
+ int primary_w, primary_h;
bool disable_primary = false;
- bool visible;
- int hscale, vscale;
- int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
- struct drm_region src = {
- .x1 = src_x,
- .x2 = src_x + src_w,
- .y1 = src_y,
- .y2 = src_y + src_h,
- };
- struct drm_region dst = {
- .x1 = crtc_x,
- .x2 = crtc_x + crtc_w,
- .y1 = crtc_y,
- .y2 = crtc_y + crtc_h,
- };
- const struct drm_region clip = {
- .x2 = crtc->mode.hdisplay,
- .y2 = crtc->mode.vdisplay,
- };
- /* Don't modify another pipe's plane */
- if (intel_plane->pipe != intel_crtc->pipe)
- return -EINVAL;
-
- if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384)
- return -EINVAL;
-
- /*
- * We may not have a scaler, eg. HSW does not have it any more
- */
- if (!intel_plane->can_scale && (((uint64_t) crtc_w << 16) != src_w ||
- ((uint64_t) crtc_h << 16) != src_h))
- return -EINVAL;
-
- /*
- * FIXME the following code does a bunch of fuzzy adjustments to the
- * coordinates and sizes. We probably need some way to decide whether
- * strict checking should be done instead.
- */
- hscale = drm_calc_hscale(&src, &dst, 1, intel_plane->max_downscale << 16);
- vscale = drm_calc_vscale(&src, &dst, 1, intel_plane->max_downscale << 16);
-
- visible = drm_region_clip_scaled(&src, &dst, &clip, hscale, vscale);
-
- crtc_x = dst.x1;
- crtc_y = dst.y1;
- crtc_w = drm_region_width(&dst);
- crtc_h = drm_region_height(&dst);
-
- /* HW doesn't seem to like smaller sprite, even when scaling */
- if (crtc_w < 3 || crtc_h < 3)
- visible = false;
-
- /* Sprite planes can be linear or x-tiled surfaces */
- switch (obj->tiling_mode) {
- case I915_TILING_NONE:
- case I915_TILING_X:
- break;
- default:
- return -EINVAL;
- }
-
- /*
- * Hardware doesn't handle subpixel coordinates.
- * Round to nearest (macro)pixel boundary.
- */
- if (format_is_yuv(fb->pixel_format)) {
- src_x = ((src.x1 + 0x10000) >> 17) << 1;
- src_w = (((src.x2 + 0x10000) >> 17) << 1) - src_x;
- } else {
- src_x = (src.x1 + 0x8000) >> 16;
- src_w = ((src.x2 + 0x8000) >> 16) - src_x;
- }
- src_y = (src.y1 + 0x8000) >> 16;
- src_h = ((src.y2 + 0x8000) >> 16) - src_y;
-
- /* Account for minimum source size when scaling */
- if (visible && (src_w != crtc_w || src_h != crtc_h)) {
- unsigned int min_w = format_is_yuv(fb->pixel_format) ? 4 : 3;
-
- if (src_w < min_w) {
- src_w = min_w;
- if (src_x > fb->width - src_w)
- src_x = fb->width - src_w;
- }
-
- /* FIXME interlacing */
- if (src_h < 3) {
- src_h = 3;
- if (src_y > fb->height - src_h)
- src_y = fb->height - src_h;
- }
- }
-
- /* Check size restrictions when scaling */
- if (visible && (src_w != crtc_w || src_h != crtc_h)) {
- if (src_w > 2048 || src_h > 2048 ||
- src_w * cpp > 4096 - 64 || fb->pitches[0] > 4096)
- return -EINVAL;
+ if (!coords->visible) {
+ intel_disable_plane(plane);
+ return 0;
}
+ /* FIXME this should happen anymore I suppose */
/* Pipe must be running... */
if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE))
return 0;
+ intel_fb = to_intel_framebuffer(fb);
+ obj = intel_fb->obj;
+ primary_w = crtc->mode.hdisplay;
+ primary_h = crtc->mode.vdisplay;
+
/*
* If the sprite is completely covering the primary plane,
* we can disable the primary and save power.
*/
- if ((crtc_x == 0) && (crtc_y == 0) &&
- (crtc_w == primary_w) && (crtc_h == primary_h))
+ if ((coords->crtc_x == 0) && (coords->crtc_y == 0) &&
+ (coords->crtc_w == primary_w) && (coords->crtc_h == primary_h))
disable_primary = true;
mutex_lock(&dev->struct_mutex);
@@ -569,9 +666,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
if (!disable_primary)
intel_enable_primary(crtc);
- if (visible) {
- intel_plane->update_plane(plane, fb, obj, crtc_x, crtc_y,
- crtc_w, crtc_h, src_x, src_y, src_w, src_h);
+ if (coords->visible) {
+ intel_plane->update_plane(plane, fb, coords);
if (disable_primary)
intel_disable_primary(crtc);
@@ -600,26 +696,31 @@ out_unlock:
}
static int
-intel_disable_plane(struct drm_plane *plane)
+intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
{
- struct drm_device *dev = plane->dev;
- struct intel_plane *intel_plane = to_intel_plane(plane);
- int ret = 0;
+ int ret;
+ struct intel_plane_coords coords = {
+ .crtc_x = crtc_x,
+ .crtc_y = crtc_y,
+ .crtc_w = crtc_w,
+ .crtc_h = crtc_h,
+ .src_x = src_x,
+ .src_y = src_y,
+ .src_w = src_w,
+ .src_h = src_h,
+ };
- if (plane->crtc)
- intel_enable_primary(plane->crtc);
- intel_plane->disable_plane(plane);
+ ret = intel_check_plane(plane, crtc, fb, &coords);
+ if (ret)
+ return ret;
- if (!intel_plane->obj)
- goto out;
+ intel_commit_plane(plane, crtc, fb, &coords);
- mutex_lock(&dev->struct_mutex);
- intel_unpin_fb_obj(intel_plane->obj);
- intel_plane->obj = NULL;
- mutex_unlock(&dev->struct_mutex);
-out:
-
- return ret;
+ return 0;
}
static void intel_destroy_plane(struct drm_plane *plane)
--
1.7.8.6
