From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Adjust the EIR clearing to cope with the edge triggered IIR on i965/g4x. To guarantee an edge in the ISR master error bit we temporarily mask everything in EMR. As some of the EIR bits can't even be directly cleared we also borrow a trick from i915_clear_error_registers() and permanently mask any bit that remains high. No real thought given to how we might unmask them again once the cause for the error has been clered. I suppose on pre-g4x GPU reset will reinitialize EMR from scratch. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_irq.c | 105 ++++++++++++++++++++++++++++++++++++---- drivers/gpu/drm/i915/i915_reg.h | 1 - 2 files changed, 96 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 59250ecbd0d9..985a137901fb 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3087,7 +3087,7 @@ static void i915_clear_error_registers(struct drm_i915_private *dev_priv) */ DRM_DEBUG_DRIVER("EIR stuck: 0x%08x, masking\n", eir); I915_WRITE(EMR, I915_READ(EMR) | eir); - I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); + I915_WRITE(IIR, I915_MASTER_ERROR_INTERRUPT); } } @@ -4107,6 +4107,81 @@ static int i8xx_irq_postinstall(struct drm_device *dev) return 0; } +static void i8xx_error_irq_ack(struct drm_i915_private *dev_priv, + u16 *eir, u16 *eir_stuck) +{ + u16 emr; + + *eir = I915_READ16(EIR); + + if (*eir) + I915_WRITE16(EIR, *eir); + + *eir_stuck = I915_READ16(EIR); + if (*eir_stuck == 0) + return; + + /* + * Toggle all EMR bits to make sure we get an edge + * in the ISR master error bit if we don't clear + * all the EIR bits. Otherwise the edge triggered + * IIR on i965/g4x wouldn't notice that an interrupt + * is still pending. Also some EIR bits can't be + * cleared except by handling the underlying error + * (or by a GPU reset) so we mask any bit that + * remains set. + */ + emr = I915_READ16(EMR); + I915_WRITE16(EMR, 0xffff); + I915_WRITE16(EMR, emr | *eir_stuck); +} + +static void i8xx_error_irq_handler(struct drm_i915_private *dev_priv, + u16 eir, u16 eir_stuck) +{ + DRM_DEBUG("Master Error: EIR 0x%04x\n", eir); + + if (eir_stuck) + DRM_DEBUG_DRIVER("EIR stuck: 0x%04x, masked\n", eir_stuck); +} + +static void i9xx_error_irq_ack(struct drm_i915_private *dev_priv, + u32 *eir, u32 *eir_stuck) +{ + u32 emr; + + *eir = I915_READ(EIR); + + I915_WRITE(EIR, *eir); + + *eir_stuck = I915_READ(EIR); + if (*eir_stuck == 0) + return; + + /* + * Toggle all EMR bits to make sure we get an edge + * in the ISR master error bit if we don't clear + * all the EIR bits. Otherwise the edge triggered + * IIR on i965/g4x wouldn't notice that an interrupt + * is still pending. Also some EIR bits can't be + * cleared except by handling the underlying error + * (or by a GPU reset) so we mask any bit that + * remains set. + */ + emr = I915_READ(EMR); + I915_WRITE(EMR, 0xffffffff); + I915_WRITE(EMR, emr | *eir_stuck); +} + +static void i9xx_error_irq_handler(struct drm_i915_private *dev_priv, + u32 eir, u32 eir_stuck) +{ + DRM_DEBUG("Master Error, EIR 0x%08x\n", eir); + + if (eir_stuck) + DRM_DEBUG_DRIVER("EIR stuck: 0x%08x, masked\n", eir_stuck); +} + static irqreturn_t i8xx_irq_handler(int irq, void *arg) { struct drm_device *dev = arg; @@ -4121,6 +4196,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg) do { u32 pipe_stats[I915_MAX_PIPES] = {}; + u16 eir = 0, eir_stuck = 0; u16 iir; iir = I915_READ16(IIR); @@ -4133,13 +4209,16 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg) * signalled in iir */ i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i8xx_error_irq_ack(dev_priv, &eir, &eir_stuck); + I915_WRITE16(IIR, iir); if (iir & I915_USER_INTERRUPT) notify_ring(dev_priv->engine[RCS]); - if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) - DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i8xx_error_irq_handler(dev_priv, eir, eir_stuck); i8xx_pipestat_irq_handler(dev_priv, iir, pipe_stats); } while (0); @@ -4220,6 +4299,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) do { u32 pipe_stats[I915_MAX_PIPES] = {}; + u32 eir = 0, eir_stuck = 0; u32 hotplug_status = 0; u32 iir; @@ -4237,13 +4317,16 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) * signalled in iir */ i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); + I915_WRITE(IIR, iir); if (iir & I915_USER_INTERRUPT) notify_ring(dev_priv->engine[RCS]); - if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) - DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i9xx_error_irq_handler(dev_priv, eir, eir_stuck); if (hotplug_status) i9xx_hpd_irq_handler(dev_priv, hotplug_status); @@ -4297,14 +4380,14 @@ static int i965_irq_postinstall(struct drm_device *dev) I915_DISPLAY_PORT_INTERRUPT | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | - I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); + I915_MASTER_ERROR_INTERRUPT); enable_mask = I915_ASLE_INTERRUPT | I915_DISPLAY_PORT_INTERRUPT | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | - I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT | + I915_MASTER_ERROR_INTERRUPT | I915_USER_INTERRUPT; if (IS_G4X(dev_priv)) @@ -4364,6 +4447,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) do { u32 pipe_stats[I915_MAX_PIPES] = {}; + u32 eir = 0, eir_stuck = 0; u32 hotplug_status = 0; u32 iir; @@ -4380,6 +4464,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) * signalled in iir */ i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); + I915_WRITE(IIR, iir); if (iir & I915_USER_INTERRUPT) @@ -4388,8 +4475,8 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) if (iir & I915_BSD_USER_INTERRUPT) notify_ring(dev_priv->engine[VCS]); - if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) - DRM_DEBUG("Command parser error, iir 0x%08x\n", iir); + if (iir & I915_MASTER_ERROR_INTERRUPT) + i9xx_error_irq_handler(dev_priv, eir, eir_stuck); if (hotplug_status) i9xx_hpd_irq_handler(dev_priv, hotplug_status); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 987def26ce82..50a47753014b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2805,7 +2805,6 @@ enum i915_power_well_id { #define I915_DISPLAY_PORT_INTERRUPT (1<<17) #define I915_DISPLAY_PIPE_C_HBLANK_INTERRUPT (1<<16) #define I915_MASTER_ERROR_INTERRUPT (1<<15) -#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) #define I915_DISPLAY_PIPE_B_HBLANK_INTERRUPT (1<<14) #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ #define I915_DISPLAY_PIPE_A_HBLANK_INTERRUPT (1<<13) -- 2.16.4 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx