On Wed, May 16, 2018 at 7:21 PM, Manasi Navare
<manasi.d.navare@xxxxxxxxx> wrote:
> This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp:
> Do not do link training fallback or prune modes on EDP") that causes
> a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
> where first link training fails and a retraining is required by falling
> back to lower link rate/lane count.
> In case of some panels they advertise higher link rate/lane count
> than whats required for supporting the panel's native mode.
> But we always link train at highest link rate/lane count for eDP
> and if that fails we can still fallback to lower link rate/lane count
> as long as the fallback link BW still fits the native mode to avoid
> pruning the panel's native mode yet retraining at fallback values
> to recover from a blank screen.
>
> Cc: Clinton Taylor <clinton.a.taylor@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
This "fixes" the issue on my laptop. It flicks back and forth, but end
up working. I'm attaching the dmesg
/gpu/drm/i915/intel_dp.c | 25 +++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_dp_link_training.c | 26 +++++++++-----------------
> 2 files changed, 34 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 2cc58596..7f7202a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -387,6 +387,21 @@ static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
> return true;
> }
>
> +static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
> + int link_rate,
> + uint8_t lane_count)
> +{
> + struct drm_display_mode *fixed_mode = intel_dp->attached_connector->panel.fixed_mode;
> + int mode_rate, max_rate;
> +
> + mode_rate = intel_dp_link_required(fixed_mode->clock, 18);
> + max_rate = intel_dp_max_data_rate(link_rate, lane_count);
> + if (mode_rate > max_rate)
> + return false;
> +
> + return true;
> +}
> +
> int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> int link_rate, uint8_t lane_count)
> {
> @@ -396,9 +411,19 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> intel_dp->num_common_rates,
> link_rate);
> if (index > 0) {
> + if (intel_dp_is_edp(intel_dp) &&
> + !intel_dp_can_link_train_fallback_for_edp(intel_dp,
> + intel_dp->common_rates[index-1],
> + lane_count))
> + return -1;
> intel_dp->max_link_rate = intel_dp->common_rates[index - 1];
> intel_dp->max_link_lane_count = lane_count;
> } else if (lane_count > 1) {
> + if (intel_dp_is_edp(intel_dp) &&
> + !intel_dp_can_link_train_fallback_for_edp(intel_dp,
> + intel_dp_max_common_rate(intel_dp),
> + lane_count >> 1))
> + return -1;
> intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
> intel_dp->max_link_lane_count = lane_count >> 1;
> } else {
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index 3fcaa98..6673975 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -335,22 +335,14 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> return;
>
> failure_handling:
> - /* Dont fallback and prune modes if its eDP */
> - if (!intel_dp_is_edp(intel_dp)) {
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> - intel_connector->base.base.id,
> - intel_connector->base.name,
> - intel_dp->link_rate, intel_dp->lane_count);
> - if (!intel_dp_get_link_train_fallback_values(intel_dp,
> - intel_dp->link_rate,
> - intel_dp->lane_count))
> - /* Schedule a Hotplug Uevent to userspace to start modeset */
> - schedule_work(&intel_connector->modeset_retry_work);
> - } else {
> - DRM_ERROR("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> - intel_connector->base.base.id,
> - intel_connector->base.name,
> - intel_dp->link_rate, intel_dp->lane_count);
> - }
> + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at link rate = %d, lane count = %d",
> + intel_connector->base.base.id,
> + intel_connector->base.name,
> + intel_dp->link_rate, intel_dp->lane_count);
> + if (!intel_dp_get_link_train_fallback_values(intel_dp,
> + intel_dp->link_rate,
> + intel_dp->lane_count))
> + /* Schedule a Hotplug Uevent to userspace to start modeset */
> + schedule_work(&intel_connector->modeset_retry_work);
> return;
> }
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Lucas De Marchi
[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[ 0.000000] Linux version 4.17.0-rc5-tip-demarchi+ (lucas@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 8.1.1 20180502 (Red Hat 8.1.1-1) (GCC)) #5 SMP PREEMPT Thu May 17 16:15:02 PDT 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-tip-demarchi+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 drm.debug=0xe systemd.unit=multi-user.target
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000065829fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006582a000-0x000000006582afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006582b000-0x0000000065854fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065855000-0x00000000658affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000658b0000-0x00000000660a0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000660a1000-0x0000000077f57fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077f58000-0x00000000796d2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000796d3000-0x0000000079723fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079724000-0x0000000079edcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079edd000-0x000000007a4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x63a93018-0x63aa3057] usable ==> usable
[ 0.000000] e820: update [mem 0x63a93018-0x63aa3057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000063a93017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000063a93018-0x0000000063aa3057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000063aa3058-0x0000000065829fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006582a000-0x000000006582afff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006582b000-0x0000000065854fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065855000-0x00000000658affff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000658b0000-0x00000000660a0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000660a1000-0x0000000077f57fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000077f58000-0x00000000796d2fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000796d3000-0x0000000079723fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079724000-0x0000000079edcfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079edd000-0x000000007a4fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x796f5000 ACPI 2.0=0x796f5000 SMBIOS=0xf0000 ESRT=0x7a25d598
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9350/0PWNCR, BIOS 1.4.18 06/06/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000007a25d598 to 0x000000007a25d5d0.
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1a3263000, 0x1a3263fff] PGTABLE
[ 0.000000] BRK [0x1a3264000, 0x1a3264fff] PGTABLE
[ 0.000000] BRK [0x1a3265000, 0x1a3265fff] PGTABLE
[ 0.000000] BRK [0x1a3266000, 0x1a3266fff] PGTABLE
[ 0.000000] BRK [0x1a3267000, 0x1a3267fff] PGTABLE
[ 0.000000] BRK [0x1a3268000, 0x1a3268fff] PGTABLE
[ 0.000000] BRK [0x1a3269000, 0x1a3269fff] PGTABLE
[ 0.000000] BRK [0x1a326a000, 0x1a326afff] PGTABLE
[ 0.000000] BRK [0x1a326b000, 0x1a326bfff] PGTABLE
[ 0.000000] BRK [0x1a326c000, 0x1a326cfff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x298c2000-0x2af59fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000796F5000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000796F50B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000079716188 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000796F5230 020F57 (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079EDBF80 000040
[ 0.000000] ACPI: APIC 0x0000000079716298 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000079716320 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000079716368 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000079716408 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000079716448 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000079716480 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x0000000079716798 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000079716830 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079716A78 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000079719628 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000007971A210 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007971A248 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007971A2A0 000737 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
[ 0.000000] ACPI: BOOT 0x000000007971A9D8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007971AA00 0035AE (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000007971DFB0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000007971DFF8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x000000007971EE70 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007971EEC8 003B57 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x0000000079722A20 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x0000000079722B98 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x0000000079722BD0 000038 (v00 ?\xadq{ 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000079722C08 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x0000000079722CF8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efd5000-0x27effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000065829fff]
[ 0.000000] node 0: [mem 0x0000000065855000-0x00000000658affff]
[ 0.000000] node 0: [mem 0x00000000660a1000-0x0000000077f57fff]
[ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2057944
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7581 pages used for memmap
[ 0.000000] DMA32 zone: 485181 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x63a93000-0x63a93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x63aa3000-0x63aa3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6582a000-0x6582afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6582b000-0x65854fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x658b0000-0x660a0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77f58000-0x796d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x796d3000-0x79723fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79724000-0x79edcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79edd000-0x7a4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x520 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s133592 r8192 d30248 u524288
[ 0.000000] pcpu-alloc: s133592 r8192 d30248 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2025766
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-tip-demarchi+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 drm.debug=0xe systemd.unit=multi-user.target
[ 0.000000] Memory: 7656044K/8231776K available (12300K kernel code, 1434K rwdata, 3784K rodata, 1924K init, 9784K bss, 575732K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 35425 entries in 139 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] DMAR: Host address width 39
[ 0.001000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.001000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.001000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.001000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.001000] DMAR: RMRR base: 0x00000079465000 end: 0x00000079484fff
[ 0.001000] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.001000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.001000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.001000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.001000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.001000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.001000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.002000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.002000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.011000] tsc: Detected 2600.000 MHz processor
[ 0.011000] tsc: Detected 2592.000 MHz TSC
[ 0.011000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[ 0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=2592000)
[ 0.011000] pid_max: default: 32768 minimum: 301
[ 0.011000] Security Framework initialized
[ 0.011000] Yama: becoming mindful.
[ 0.011000] SELinux: Initializing.
[ 0.011000] SELinux: Starting in permissive mode
[ 0.012841] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013370] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013401] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013418] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013602] CPU: Physical Processor ID: 0
[ 0.013602] CPU: Processor Core ID: 0
[ 0.013607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.013607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.013612] mce: CPU supports 8 MCE banks
[ 0.013620] CPU0: Thermal monitoring enabled (TM1)
[ 0.013634] process: using mwait in idle threads
[ 0.013636] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.013637] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.013638] Spectre V2 : Mitigation: Full generic retpoline
[ 0.013639] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.013639] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.013640] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.018307] Freeing SMP alternatives memory: 32K
[ 0.029022] TSC deadline timer enabled
[ 0.029026] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.034037] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.034068] ... version: 4
[ 0.034069] ... bit width: 48
[ 0.034070] ... generic registers: 4
[ 0.034070] ... value mask: 0000ffffffffffff
[ 0.034071] ... max period: 00007fffffffffff
[ 0.034072] ... fixed-purpose events: 3
[ 0.034072] ... event mask: 000000070000000f
[ 0.035035] Hierarchical SRCU implementation.
[ 0.037157] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.038035] smp: Bringing up secondary CPUs ...
[ 0.044052] x86: Booting SMP configuration:
[ 0.044053] .... node #0, CPUs: #1 #2 #3
[ 0.058505] smp: Brought up 1 node, 4 CPUs
[ 0.058505] smpboot: Max logical packages: 1
[ 0.058505] smpboot: Total of 4 processors activated (20736.00 BogoMIPS)
[ 0.059284] devtmpfs: initialized
[ 0.059284] x86/mm: Memory block size: 128MB
[ 0.060037] PM: Registering ACPI NVS region [mem 0x6582a000-0x6582afff] (4096 bytes)
[ 0.060038] PM: Registering ACPI NVS region [mem 0x79724000-0x79edcfff] (8097792 bytes)
[ 0.060174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.060174] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.060174] pinctrl core: initialized pinctrl subsystem
[ 0.060221] RTC time: 17:09:11, date: 05/18/18
[ 0.060293] NET: Registered protocol family 16
[ 0.060397] audit: initializing netlink subsys (disabled)
[ 0.060403] audit: type=2000 audit(1526663351.060:1): state=initialized audit_enabled=0 res=1
[ 0.060403] cpuidle: using governor menu
[ 0.060403] Simple Boot Flag at 0x47 set to 0x80
[ 0.060403] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.060403] ACPI: bus type PCI registered
[ 0.060403] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.060403] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.060403] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.060403] PCI: Using configuration type 1 for base access
[ 0.062038] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.062038] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.062038] cryptd: max_cpu_qlen set to 1000
[ 0.062053] ACPI: Added _OSI(Module Device)
[ 0.062054] ACPI: Added _OSI(Processor Device)
[ 0.062055] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.062056] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.062057] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.100901] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.108528] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.117299] ACPI: Dynamic OEM Table Load:
[ 0.117306] ACPI: SSDT 0xFFFF88C574EDF000 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.117714] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.119026] ACPI: Dynamic OEM Table Load:
[ 0.119032] ACPI: SSDT 0xFFFF88C5748F4000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.119402] ACPI: Dynamic OEM Table Load:
[ 0.119406] ACPI: SSDT 0xFFFF88C574EBD180 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.119666] ACPI: Dynamic OEM Table Load:
[ 0.119670] ACPI: SSDT 0xFFFF88C57493EE00 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.120256] ACPI: Dynamic OEM Table Load:
[ 0.120262] ACPI: SSDT 0xFFFF88C574ED9800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.120832] ACPI: Dynamic OEM Table Load:
[ 0.120836] ACPI: SSDT 0xFFFF88C57493E800 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.121192] ACPI: Dynamic OEM Table Load:
[ 0.121196] ACPI: SSDT 0xFFFF88C57493F200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.123492] ACPI: EC: EC started
[ 0.123493] ACPI: EC: interrupt blocked
[ 0.125690] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.125692] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.125693] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.125694] ACPI: Interpreter enabled
[ 0.125738] ACPI: (supports S0 S3 S4 S5)
[ 0.125739] ACPI: Using IOAPIC for interrupt routing
[ 0.125778] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.126357] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.128100] ACPI: Power Resource [PG00] (on)
[ 0.128439] ACPI: Power Resource [PG01] (on)
[ 0.128762] ACPI: Power Resource [PG02] (on)
[ 0.130474] ACPI: Power Resource [WRST] (off)
[ 0.130817] ACPI: Power Resource [WRST] (off)
[ 0.131157] ACPI: Power Resource [WRST] (off)
[ 0.131491] ACPI: Power Resource [WRST] (off)
[ 0.131827] ACPI: Power Resource [WRST] (off)
[ 0.132165] ACPI: Power Resource [WRST] (off)
[ 0.132497] ACPI: Power Resource [WRST] (off)
[ 0.132827] ACPI: Power Resource [WRST] (off)
[ 0.133167] ACPI: Power Resource [WRST] (off)
[ 0.133539] ACPI: Power Resource [WRST] (off)
[ 0.133874] ACPI: Power Resource [WRST] (off)
[ 0.134221] ACPI: Power Resource [WRST] (off)
[ 0.134562] ACPI: Power Resource [WRST] (off)
[ 0.134896] ACPI: Power Resource [WRST] (off)
[ 0.135233] ACPI: Power Resource [WRST] (off)
[ 0.135566] ACPI: Power Resource [WRST] (off)
[ 0.135898] ACPI: Power Resource [WRST] (off)
[ 0.136234] ACPI: Power Resource [WRST] (off)
[ 0.136565] ACPI: Power Resource [WRST] (off)
[ 0.136898] ACPI: Power Resource [WRST] (off)
[ 0.150414] ACPI: Power Resource [FN00] (off)
[ 0.150498] ACPI: Power Resource [FN01] (off)
[ 0.150575] ACPI: Power Resource [FN02] (off)
[ 0.150654] ACPI: Power Resource [FN03] (off)
[ 0.150730] ACPI: Power Resource [FN04] (off)
[ 0.151878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.151884] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.151919] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.152498] PCI host bridge to bus 0000:00
[ 0.152501] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.152502] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.152504] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.152505] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.152506] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.152508] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.152509] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.152510] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.152511] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.152513] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.152514] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.152515] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.152516] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.152518] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.152519] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.152520] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.152522] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.152530] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.152655] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.152666] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.152672] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.152676] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.152691] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.152809] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.152822] pci 0000:00:04.0: reg 0x10: [mem 0xdc720000-0xdc727fff 64bit]
[ 0.153019] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.153042] pci 0000:00:14.0: reg 0x10: [mem 0xdc710000-0xdc71ffff 64bit]
[ 0.153115] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.153248] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.153272] pci 0000:00:14.2: reg 0x10: [mem 0xdc738000-0xdc738fff 64bit]
[ 0.153522] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.153786] pci 0000:00:15.0: reg 0x10: [mem 0xdc737000-0xdc737fff 64bit]
[ 0.154794] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.155041] pci 0000:00:15.1: reg 0x10: [mem 0xdc736000-0xdc736fff 64bit]
[ 0.155932] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.155954] pci 0000:00:16.0: reg 0x10: [mem 0xdc735000-0xdc735fff 64bit]
[ 0.156028] pci 0000:00:16.0: PME# supported from D3hot
[ 0.156173] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.156194] pci 0000:00:17.0: reg 0x10: [mem 0xdc730000-0xdc731fff]
[ 0.156203] pci 0000:00:17.0: reg 0x14: [mem 0xdc734000-0xdc7340ff]
[ 0.156212] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.156220] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.156229] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.156239] pci 0000:00:17.0: reg 0x24: [mem 0xdc733000-0xdc7337ff]
[ 0.156283] pci 0000:00:17.0: PME# supported from D3hot
[ 0.156424] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.156500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.156667] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.156741] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.156895] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.156966] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.157127] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.157211] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.157397] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.157632] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.157647] pci 0000:00:1f.2: reg 0x10: [mem 0xdc72c000-0xdc72ffff]
[ 0.157806] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.157833] pci 0000:00:1f.3: reg 0x10: [mem 0xdc728000-0xdc72bfff 64bit]
[ 0.157861] pci 0000:00:1f.3: reg 0x20: [mem 0xdc700000-0xdc70ffff 64bit]
[ 0.157910] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.158106] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.158168] pci 0000:00:1f.4: reg 0x10: [mem 0xdc732000-0xdc7320ff 64bit]
[ 0.158239] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.158525] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.158530] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.158534] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.158673] pci 0000:3a:00.0: [14e4:43a3] type 00 class 0x028000
[ 0.158710] pci 0000:3a:00.0: reg 0x10: [mem 0xdc400000-0xdc407fff 64bit]
[ 0.158725] pci 0000:3a:00.0: reg 0x18: [mem 0xdc000000-0xdc3fffff 64bit]
[ 0.158845] pci 0000:3a:00.0: supports D1 D2
[ 0.158846] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159046] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.159051] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc4fffff]
[ 0.159156] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.159193] pci 0000:3b:00.0: reg 0x14: [mem 0xdc600000-0xdc600fff]
[ 0.159317] pci 0000:3b:00.0: supports D1 D2
[ 0.159319] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.159470] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.159475] pci 0000:00:1c.5: bridge window [mem 0xdc600000-0xdc6fffff]
[ 0.159647] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802
[ 0.159676] pci 0000:3c:00.0: reg 0x10: [mem 0xdc500000-0xdc503fff 64bit]
[ 0.159685] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 0.159921] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.159924] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.159927] pci 0000:00:1d.0: bridge window [mem 0xdc500000-0xdc5fffff]
[ 0.162222] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162275] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.162323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162370] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162418] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162514] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.162564] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.164510] ACPI: EC: interrupt unblocked
[ 0.164547] ACPI: EC: event unblocked
[ 0.164589] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.164591] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.164675] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.164675] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.164675] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.164675] vgaarb: loaded
[ 0.164675] SCSI subsystem initialized
[ 0.164675] libata version 3.00 loaded.
[ 0.164675] ACPI: bus type USB registered
[ 0.164675] usbcore: registered new interface driver usbfs
[ 0.165004] usbcore: registered new interface driver hub
[ 0.165021] usbcore: registered new device driver usb
[ 0.165059] EDAC MC: Ver: 3.0.0
[ 0.166272] Registered efivars operations
[ 0.173010] PCI: Using ACPI for IRQ routing
[ 0.196557] PCI: pci_cache_line_size set to 64 bytes
[ 0.196812] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.196813] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.196814] e820: reserve RAM buffer [mem 0x63a93018-0x63ffffff]
[ 0.196815] e820: reserve RAM buffer [mem 0x6582a000-0x67ffffff]
[ 0.196816] e820: reserve RAM buffer [mem 0x658b0000-0x67ffffff]
[ 0.196817] e820: reserve RAM buffer [mem 0x77f58000-0x77ffffff]
[ 0.196818] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff]
[ 0.196819] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.196901] NetLabel: Initializing
[ 0.196902] NetLabel: domain hash size = 128
[ 0.196902] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.196916] NetLabel: unlabeled traffic allowed by default
[ 0.197054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.197059] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.199015] clocksource: Switched to clocksource tsc-early
[ 0.211877] VFS: Disk quotas dquot_6.6.0
[ 0.211891] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.211952] pnp: PnP ACPI init
[ 0.212236] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.212238] system 00:00: [io 0xffff] has been reserved
[ 0.212240] system 00:00: [io 0xffff] has been reserved
[ 0.212241] system 00:00: [io 0xffff] has been reserved
[ 0.212243] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.212245] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.212250] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212383] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.212387] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.212478] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.212494] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13 (active)
[ 0.212707] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.212708] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.212710] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.212711] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212713] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.212715] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.212716] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.212718] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.212720] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.212721] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.212725] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212765] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.212767] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.212768] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.212770] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.212772] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.212773] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.212775] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.212778] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213080] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.213084] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214201] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.214203] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.214206] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.214866] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.217440] pnp: PnP ACPI: found 10 devices
[ 0.223016] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.223027] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.223049] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.223052] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.223054] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.223058] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.223061] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.223066] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.223070] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc4fffff]
[ 0.223076] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.223080] pci 0000:00:1c.5: bridge window [mem 0xdc600000-0xdc6fffff]
[ 0.223086] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.223088] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.223092] pci 0000:00:1d.0: bridge window [mem 0xdc500000-0xdc5fffff]
[ 0.223099] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.223101] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.223102] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.223104] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.223105] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.223106] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.223108] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.223109] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.223110] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.223111] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.223113] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.223114] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.223115] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.223117] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.223118] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window]
[ 0.223119] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.223121] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.223122] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.223124] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.223125] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc4fffff]
[ 0.223126] pci_bus 0000:3b: resource 1 [mem 0xdc600000-0xdc6fffff]
[ 0.223128] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
[ 0.223129] pci_bus 0000:3c: resource 1 [mem 0xdc500000-0xdc5fffff]
[ 0.223267] NET: Registered protocol family 2
[ 0.223385] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.223418] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223623] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.223650] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223670] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223712] NET: Registered protocol family 1
[ 0.223723] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.234011] PCI: CLS 0 bytes, default 64
[ 0.234042] Unpacking initramfs...
[ 0.614170] Freeing initrd memory: 23136K
[ 0.614205] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 0.614208] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 0.614223] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.614225] software IO TLB [mem 0x5fa93000-0x63a93000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.614289] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[ 0.614302] clocksource: Switched to clocksource tsc
[ 0.615058] Initialise system trusted keyrings
[ 0.615079] Key type blacklist registered
[ 0.615109] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.616229] zbud: loaded
[ 0.616690] pstore: using deflate compression
[ 0.616729] SELinux: Registering netfilter hooks
[ 0.984115] NET: Registered protocol family 38
[ 0.984117] Key type asymmetric registered
[ 0.984118] Asymmetric key parser 'x509' registered
[ 0.984156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.984178] io scheduler noop registered
[ 0.984179] io scheduler deadline registered
[ 0.984221] io scheduler cfq registered (default)
[ 0.984222] io scheduler mq-deadline registered
[ 0.984278] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.985018] efifb: probing for efifb
[ 0.985038] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.985039] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.985039] efifb: scrolling: redraw
[ 0.985041] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.995599] Console: switching to colour frame buffer device 400x112
[ 1.005642] fb0: EFI VGA frame buffer device
[ 1.005650] intel_idle: MWAIT substates: 0x11142120
[ 1.005651] intel_idle: v0.4.1 model 0x4E
[ 1.005835] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.006521] ACPI: AC Adapter [AC] (on-line)
[ 1.006582] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.006592] ACPI: Lid Switch [LID0]
[ 1.006617] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.006623] ACPI: Power Button [PBTN]
[ 1.006654] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.006659] ACPI: Sleep Button [SBTN]
[ 1.006685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.006690] ACPI: Power Button [PWRF]
[ 1.039958] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.039959] ACPI: Thermal Zone [THM] (25 C)
[ 1.070375] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.070377] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.070538] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.070539] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.070753] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.077742] Non-volatile memory driver v1.3
[ 1.078701] nvme nvme0: pci function 0000:3c:00.0
[ 1.078728] ahci 0000:00:17.0: version 3.0
[ 1.079113] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0 impl SATA mode
[ 1.079117] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.080353] scsi host0: ahci
[ 1.080472] scsi host1: ahci
[ 1.080857] scsi host2: ahci
[ 1.080918] scsi host3: ahci
[ 1.080983] scsi host4: ahci
[ 1.081052] scsi host5: ahci
[ 1.081437] scsi host6: ahci
[ 1.081499] scsi host7: ahci
[ 1.081523] ata1: DUMMY
[ 1.081524] ata2: DUMMY
[ 1.081525] ata3: DUMMY
[ 1.081526] ata4: DUMMY
[ 1.081526] ata5: DUMMY
[ 1.081527] ata6: DUMMY
[ 1.081527] ata7: DUMMY
[ 1.081528] ata8: DUMMY
[ 1.081608] libphy: Fixed MDIO Bus: probed
[ 1.081651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.081658] ehci-pci: EHCI PCI platform driver
[ 1.081669] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.081671] ohci-pci: OHCI PCI platform driver
[ 1.081677] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.081842] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.081875] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.083033] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.083044] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.083277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 1.083280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.083282] usb usb1: Product: xHCI Host Controller
[ 1.083284] usb usb1: Manufacturer: Linux 4.17.0-rc5-tip-demarchi+ xhci-hcd
[ 1.083285] usb usb1: SerialNumber: 0000:00:14.0
[ 1.083419] hub 1-0:1.0: USB hub found
[ 1.083434] hub 1-0:1.0: 12 ports detected
[ 1.084938] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.084987] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.084991] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.085044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 1.085046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.085048] usb usb2: Product: xHCI Host Controller
[ 1.085050] usb usb2: Manufacturer: Linux 4.17.0-rc5-tip-demarchi+ xhci-hcd
[ 1.085051] usb usb2: SerialNumber: 0000:00:14.0
[ 1.085410] hub 2-0:1.0: USB hub found
[ 1.085435] hub 2-0:1.0: 6 ports detected
[ 1.085949] usb: port power management may be unreliable
[ 1.086607] usbcore: registered new interface driver usbserial_generic
[ 1.086613] usbserial: USB Serial support registered for generic
[ 1.086647] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.087361] i8042: Warning: Keylock active
[ 1.089944] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.089969] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090040] mousedev: PS/2 mouse device common for all mice
[ 1.090216] rtc_cmos 00:01: RTC can wake from S4
[ 1.090806] rtc_cmos 00:01: registered as rtc0
[ 1.090808] rtc_cmos 00:01: nvmem registration failed
[ 1.090830] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.090880] device-mapper: uevent: version 1.0.3
[ 1.090984] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@xxxxxxxxxx
[ 1.091040] intel_pstate: Intel P-state driver initializing
[ 1.091158] intel_pstate: HWP enabled
[ 1.091475] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.091508] usbcore: registered new interface driver usbhid
[ 1.091511] usbhid: USB HID core driver
[ 1.091574] intel_pmc_core: initialized
[ 1.091647] drop_monitor: Initializing network drop monitor service
[ 1.091672] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.091757] Initializing XFRM netlink socket
[ 1.091863] NET: Registered protocol family 10
[ 1.094611] Segment Routing with IPv6
[ 1.094629] mip6: Mobile IPv6
[ 1.094635] NET: Registered protocol family 17
[ 1.094878] RAS: Correctable Errors collector initialized.
[ 1.094903] microcode: sig=0x406e3, pf=0x80, revision=0xc2
[ 1.094932] microcode: Microcode Update Driver: v2.2.
[ 1.094944] AVX2 version of gcm_enc/dec engaged.
[ 1.094945] AES CTR mode by8 optimization enabled
[ 1.107212] sched_clock: Marking stable (1107207776, 0)->(1103753446, 3454330)
[ 1.107389] registered taskstats version 1
[ 1.107402] Loading compiled-in X.509 certificates
[ 1.107418] zswap: loaded using pool lzo/zbud
[ 1.111435] Key type big_key registered
[ 1.112827] Key type encrypted registered
[ 1.165605] ACPI: Battery Slot [BAT0] (battery present)
[ 1.165937] Magic number: 2:765:188
[ 1.165997] acpi device:47: hash matches
[ 1.166017] acpi device:1a: hash matches
[ 1.166194] rtc_cmos 00:01: setting system clock to 2018-05-18 17:09:12 UTC (1526663352)
[ 1.235744] nvme0n1: p1 p2 p3 p4 p5 p6
[ 1.392164] Freeing unused kernel memory: 1924K
[ 1.392166] Write protecting the kernel read-only data: 18432k
[ 1.393181] Freeing unused kernel memory: 2008K
[ 1.393632] Freeing unused kernel memory: 312K
[ 1.398343] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.398343] x86/mm: Checking user space page tables
[ 1.402913] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.402918] rodata_test: all tests were successful
[ 1.410043] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.420501] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.432372] systemd[1]: Detected architecture x86-64.
[ 1.432375] systemd[1]: Running in initial RAM disk.
[ 1.434637] systemd[1]: Set hostname to <ldmartin-desk.amr.corp.intel.com>.
[ 1.470080] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.470115] systemd[1]: Listening on udev Kernel Socket.
[ 1.470150] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.470201] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.470240] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.470266] systemd[1]: Listening on Journal Audit Socket.
[ 1.470320] systemd[1]: Listening on Journal Socket.
[ 1.471514] systemd[1]: Starting Setup Virtual Console...
[ 1.472069] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.537310] usb 1-1: New USB device found, idVendor=0424, idProduct=2134, bcdDevice=60.80
[ 1.537313] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.537315] usb 1-1: Product: USB2134B
[ 1.537317] usb 1-1: Manufacturer: SMSC
[ 1.537777] hub 1-1:1.0: USB hub found
[ 1.537797] hub 1-1:1.0: 4 ports detected
[ 1.553269] audit: type=1130 audit(1526663352.885:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.561557] audit: type=1130 audit(1526663352.893:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.562774] audit: type=1130 audit(1526663352.894:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.562784] audit: type=1131 audit(1526663352.894:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.574406] audit: type=1130 audit(1526663352.906:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.583445] audit: type=1130 audit(1526663352.915:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.652015] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.656096] audit: type=1130 audit(1526663352.988:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.673892] audit: type=1130 audit(1526663353.005:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.726857] random: fast init done
[ 1.752800] [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
[ 1.752842] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
[ 1.752890] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
[ 1.752933] [drm:intel_uc_init_early [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
[ 1.752997] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
[ 1.753736] [drm:i915_driver_load [i915]] ppgtt mode: 3
[ 1.753802] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
[ 1.753842] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
[ 1.753879] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
[ 1.753881] checking generic (90000000 15f9000) vs hw (90000000 10000000)
[ 1.753882] fb: switching to inteldrmfb from EFI VGA
[ 1.753978] Console: switching to colour dummy device 80x25
[ 1.754406] [drm] Replacing VGA console driver
[ 1.754467] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047
[ 1.754507] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
[ 1.754560] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec5018
[ 1.754618] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
[ 1.754660] [drm:intel_opregion_setup [i915]] SWSCI supported
[ 1.756442] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[ 1.756486] [drm:intel_opregion_setup [i915]] ASLE supported
[ 1.756527] [drm:intel_opregion_setup [i915]] ASLE extension supported
[ 1.756573] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[ 1.756664] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
[ 1.756666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.756667] [drm] Driver supports precise vblank timestamp query.
[ 1.756713] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
[ 1.756753] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203
[ 1.756793] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
[ 1.756830] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
[ 1.757636] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
[ 1.757680] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
[ 1.757719] [drm:intel_bios_init [i915]] DRRS supported mode is seamless
[ 1.757759] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
[ 1.757774] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.757812] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0
[ 1.757850] [drm:intel_bios_init [i915]] DRRS State Enabled:0
[ 1.757886] [drm:intel_bios_init [i915]] Skipping SDVO device mapping
[ 1.757924] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 1.757960] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
[ 1.757996] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.758674] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
[ 1.758717] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.758755] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
[ 1.759283] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
[ 1.759333] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz
[ 1.759376] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[ 1.759422] [drm:intel_power_well_enable [i915]] enabling power well 1
[ 1.759460] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
[ 1.759508] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1
[ 1.759553] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
[ 1.759593] [drm:skl_init_cdclk [i915]] Max dotclock rate: 675000 kHz
[ 1.759644] [drm:intel_power_well_enable [i915]] enabling always-on
[ 1.759681] [drm:intel_power_well_enable [i915]] enabling DC off
[ 1.759718] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[ 1.759755] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 1.759761] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.759796] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[ 1.759830] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
[ 1.759865] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
[ 1.759898] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
[ 1.759940] [drm:intel_csr_ucode_init [i915]] Loading i915/skl_dmc_ver1_27.bin
[ 1.760321] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 1.761542] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
[ 1.761594] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
[ 1.761633] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
[ 1.761669] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
[ 1.761703] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
[ 1.761737] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
[ 1.761770] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
[ 1.761804] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
[ 1.761837] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
[ 1.761882] [drm:intel_modeset_init [i915]] 3 display pipes available.
[ 1.761986] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1
[ 1.762337] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
[ 1.762383] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
[ 1.762466] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
[ 1.762506] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
[ 1.762544] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
[ 1.762582] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
[ 1.762665] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[ 1.762717] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[ 1.762799] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
[ 1.763301] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00
[ 1.763756] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 1.764189] [drm:intel_psr_init_dpcd [i915]] Detected EDP PSR Panel.
[ 1.765363] [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40
[ 1.768793] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 1.768806] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 1.768832] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 1.768883] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
[ 1.768967] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 937/937
[ 1.769025] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
[ 1.769082] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT)
[ 1.769129] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
[ 1.769173] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
[ 1.769219] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
[ 1.769258] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
[ 1.769300] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
[ 1.769341] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
[ 1.769400] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
[ 1.769445] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
[ 1.769488] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
[ 1.769531] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:41:pipe A] hw state readout: enabled
[ 1.769572] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[ 1.769609] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[ 1.769648] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
[ 1.769687] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:55:pipe B] hw state readout: disabled
[ 1.769723] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
[ 1.769750] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
[ 1.769776] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0
[ 1.769802] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:69:pipe C] hw state readout: disabled
[ 1.769829] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
[ 1.769855] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.769884] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.769911] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
[ 1.769940] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:70:DDI A] hw state readout: enabled, pipe A
[ 1.769965] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:79:DDI B] hw state readout: disabled, pipe A
[ 1.769991] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:81:DP-MST A] hw state readout: disabled, pipe A
[ 1.770019] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:82:DP-MST B] hw state readout: disabled, pipe B
[ 1.770051] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:83:DP-MST C] hw state readout: disabled, pipe C
[ 1.770087] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:90:DDI C] hw state readout: disabled, pipe A
[ 1.770121] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:92:DP-MST A] hw state readout: disabled, pipe A
[ 1.770156] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:93:DP-MST B] hw state readout: disabled, pipe B
[ 1.770191] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP-MST C] hw state readout: disabled, pipe C
[ 1.770228] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:71:eDP-1] hw state readout: enabled
[ 1.770264] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:80:DP-1] hw state readout: disabled
[ 1.770302] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:86:HDMI-A-1] hw state readout: disabled
[ 1.770340] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:91:DP-2] hw state readout: disabled
[ 1.770376] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:96:HDMI-A-2] hw state readout: disabled
[ 1.770427] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][setup_hw_state]
[ 1.770467] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[ 1.770507] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
[ 1.770549] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 6523016, gmch_n: 8388608, link_m: 724779, link_n: 524288, tu: 64
[ 1.770588] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[ 1.770643] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 1.770659] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 60 373249 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 1.770698] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 1.770712] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 60 373249 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 1.770754] [drm:intel_dump_pipe_config [i915]] crtc timings: 373249 3200 3248 3280 3360 1800 1803 1808 1852, type: 0x40 flags: 0xa
[ 1.770793] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 3200x1800, pixel rate 373249
[ 1.770833] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 1.770872] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.770910] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 1.770949] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[ 1.770986] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[ 1.771023] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[ 1.771065] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[ 1.771100] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[ 1.771135] [drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][setup_hw_state]
[ 1.771169] [drm:intel_dump_pipe_config [i915]] output_types: (0x0)
[ 1.771205] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[ 1.771242] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[ 1.771277] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 1.771291] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.771327] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 1.771340] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.771379] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.771415] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[ 1.771449] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 1.771484] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.771518] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 1.771553] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[ 1.771587] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[ 1.771622] [drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] disabled, scaler_id = -1
[ 1.771656] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
[ 1.771689] [drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
[ 1.771725] [drm:intel_dump_pipe_config [i915]] [CRTC:69:pipe C][setup_hw_state]
[ 1.771759] [drm:intel_dump_pipe_config [i915]] output_types: (0x0)
[ 1.771792] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
[ 1.771826] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[ 1.771858] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 1.771878] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.771911] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 1.771924] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.771959] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.771993] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[ 1.772026] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
[ 1.772071] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.772105] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 1.772140] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[ 1.772172] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[ 1.772208] [drm:intel_dump_pipe_config [i915]] [PLANE:56:plane 1C] disabled, scaler_id = -1
[ 1.772243] [drm:intel_dump_pipe_config [i915]] [PLANE:61:plane 2C] disabled, scaler_id = -1
[ 1.772280] [drm:intel_dump_pipe_config [i915]] [PLANE:66:cursor C] disabled, scaler_id = -1
[ 1.772345] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
[ 1.772385] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
[ 1.772426] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
[ 1.772462] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 1.772517] [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=3200x1800@32, offset=0, pitch 12800, size 0x15f9000
[ 1.772562] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000015f9000
[ 1.772615] [drm:intel_alloc_initial_plane_obj.isra.127 [i915]] initial plane fb obj (ptrval)
[ 1.772667] [drm:intel_modeset_init [i915]] pipe A active planes 0x1
[ 1.772750] [drm:intel_wopcm_init [i915]] Calculated GuC WOPCM Region: [16KiB, 1008KiB)
[ 1.772988] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [15fa000, 100000000]
[ 1.773020] [drm:intel_ctx_workarounds_init [i915]] Number of context specific w/a: 13
[ 1.773081] [drm:i915_gem_contexts_init [i915]] logical context support initialized
[ 1.774249] [drm:intel_fbdev_init [i915]] found possible fb from plane A
[ 1.774293] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
[ 1.774336] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
[ 1.774375] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
[ 1.774417] [drm:intel_fbdev_init [i915]] pipe A area: 3200x1800, bpp: 32, size: 23040000
[ 1.774457] [drm:intel_fbdev_init [i915]] fb big enough for plane A (23040000 >= 23040000)
[ 1.774494] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
[ 1.774531] [drm:intel_fbdev_init [i915]] pipe C not active, skipping
[ 1.774567] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
[ 1.774977] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
[ 1.775025] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
[ 1.775153] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
[ 1.775289] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
[ 1.775358] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 1.775525] [drm:intel_opregion_register [i915]] 5 outputs detected
[ 1.779779] usb 1-2: New USB device found, idVendor=045e, idProduct=070f, bcdDevice= 1.00
[ 1.779780] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.779782] usb 1-2: Product: Microsoft LifeChat LX-3000
[ 1.780685] input: Microsoft LifeChat LX-3000 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:045E:070F.0001/input/input7
[ 1.785044] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.785918] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.832352] hid-generic 0003:045E:070F.0001: input,hidraw0: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:14.0-2/input3
[ 1.832415] i915 device info: pciid=0x1916 rev=0x07 platform=SKYLAKE gen=9
[ 1.832425] [drm:drm_setup_crtcs [drm_kms_helper]]
[ 1.832427] i915 device info: is_mobile: no
[ 1.832436] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[ 1.832437] i915 device info: is_lp: no
[ 1.832439] i915 device info: is_alpha_support: no
[ 1.832440] i915 device info: has_64bit_reloc: yes
[ 1.832441] i915 device info: has_aliasing_ppgtt: yes
[ 1.832508] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 1.832509] i915 device info: has_csr: yes
[ 1.832511] i915 device info: has_ddi: yes
[ 1.832512] i915 device info: has_dp_mst: yes
[ 1.832568] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 1.832570] i915 device info: has_reset_engine: yes
[ 1.832621] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 1.832623] i915 device info: has_fbc: yes
[ 1.832672] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 1.832674] i915 device info: has_fpga_dbg: yes
[ 1.832676] i915 device info: has_full_ppgtt: yes
[ 1.832677] i915 device info: has_full_48bit_ppgtt: yes
[ 1.832678] i915 device info: has_gmch_display: no
[ 1.832680] i915 device info: has_guc: yes
[ 1.832681] i915 device info: has_guc_ct: no
[ 1.832682] i915 device info: has_hotplug: yes
[ 1.832684] i915 device info: has_l3_dpf: no
[ 1.832685] i915 device info: has_llc: yes
[ 1.832686] i915 device info: has_logical_ring_contexts: yes
[ 1.832688] i915 device info: has_logical_ring_elsq: no
[ 1.832689] i915 device info: has_logical_ring_preemption: yes
[ 1.832690] i915 device info: has_overlay: no
[ 1.832692] i915 device info: has_pooled_eu: no
[ 1.832693] i915 device info: has_psr: yes
[ 1.832695] i915 device info: has_rc6: yes
[ 1.832696] i915 device info: has_rc6p: no
[ 1.832697] i915 device info: has_resource_streamer: yes
[ 1.832699] i915 device info: has_runtime_pm: yes
[ 1.832700] i915 device info: has_snoop: no
[ 1.832701] i915 device info: unfenced_needs_alignment: no
[ 1.832703] i915 device info: cursor_needs_physical: no
[ 1.832704] i915 device info: hws_needs_physical: no
[ 1.832705] i915 device info: overlay_needs_physical: no
[ 1.832707] i915 device info: supports_tv: no
[ 1.832708] i915 device info: has_ipc: yes
[ 1.832710] i915 device info: slice total: 1, mask=0001
[ 1.832711] i915 device info: subslice total: 3
[ 1.832713] i915 device info: slice0: 3 subslices, mask=0007
[ 1.832715] i915 device info: slice1: 0 subslices, mask=0000
[ 1.832716] i915 device info: slice2: 0 subslices, mask=0000
[ 1.832718] i915 device info: EU total: 24
[ 1.832719] i915 device info: EU per subslice: 8
[ 1.832720] i915 device info: has slice power gating: no
[ 1.832722] i915 device info: has subslice power gating: no
[ 1.832723] i915 device info: has EU power gating: yes
[ 1.832724] i915 device info: CS timestamp frequency: 12000 kHz
[ 1.832725] [drm] DRM_I915_DEBUG enabled
[ 1.833467] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 1.833811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] status updated from unknown to connected
[ 1.833832] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 1.833851] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 1.833865] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 1.833905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[ 1.833920] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 1.833935] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 1.833946] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1]
[ 1.834001] [drm:intel_dp_detect [i915]] [CONNECTOR:80:DP-1]
[ 1.834057] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 1.834114] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 1.834128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] status updated from unknown to disconnected
[ 1.834137] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] disconnected
[ 1.834144] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1]
[ 1.834194] [drm:intel_hdmi_detect [i915]] [CONNECTOR:86:HDMI-A-1]
[ 1.834522] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.834569] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.834873] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 1.834903] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.834946] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.834991] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 1.837691] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 1.837736] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 1.837985] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.838029] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 1.838355] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 1.838376] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 1.838383] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] status updated from unknown to disconnected
[ 1.838392] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] disconnected
[ 1.838401] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2]
[ 1.838445] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-2]
[ 1.838488] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 1.838541] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 1.838551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] status updated from unknown to disconnected
[ 1.838556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] disconnected
[ 1.838561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2]
[ 1.838607] [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-2]
[ 1.838935] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 1.838976] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 1.839216] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 1.839247] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 1.839295] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.839346] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 1.842042] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 1.842085] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 1.842324] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 1.842365] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 1.842672] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 1.842693] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 1.842700] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] status updated from unknown to disconnected
[ 1.842705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] disconnected
[ 1.842711] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[ 1.842717] [drm:drm_setup_crtcs [drm_kms_helper]] connector 80 enabled? no
[ 1.842721] [drm:drm_setup_crtcs [drm_kms_helper]] connector 86 enabled? no
[ 1.842726] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
[ 1.842731] [drm:drm_setup_crtcs [drm_kms_helper]] connector 96 enabled? no
[ 1.842786] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[ 1.842793] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[ 1.842798] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[ 1.842803] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3200x1800
[ 1.842808] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
[ 1.842814] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3200x1800 set on crtc 41 (0,0)
[ 1.842859] [drm:intelfb_create [i915]] re-using BIOS fb
[ 1.842906] [drm:intelfb_create [i915]] allocated 3200x1800 fb: 0x00000000
[ 1.842957] fbcon: inteldrmfb (fb0) is primary device
[ 1.843102] [drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[ 1.843154] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[ 1.843176] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 1.843229] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 24 pixel clock 298600KHz
[ 1.843279] [drm:intel_dp_compute_config [i915]] DP lane count 4 clock 540000 bpp 24
[ 1.843329] [drm:intel_dp_compute_config [i915]] DP link rate required 895800 available 2160000
[ 1.843383] [drm:intel_dp_compute_config [i915]] PSR disable by flag
[ 1.843439] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1.843493] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[ 1.843546] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[ 1.843596] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[ 1.843647] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 3478942, gmch_n: 8388608, link_m: 579823, link_n: 1048576, tu: 64
[ 1.843692] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[ 1.843742] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 1.843763] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 1.843811] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 1.843829] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 1.843880] [drm:intel_dump_pipe_config [i915]] crtc timings: 298600 3200 3248 3280 3360 1800 1803 1808 1852, type: 0x40 flags: 0xa
[ 1.843924] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3200x1800, pixel rate 298600
[ 1.843972] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 1.844016] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.844068] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 1.844112] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
[ 1.844158] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[ 1.844203] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] FB:99, fb = 3200x1800 format = XR24 little-endian (0x34325258)
[ 1.844251] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+3200+1800 dst 0x0+3200+1800
[ 1.844293] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[ 1.844340] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[ 1.844390] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[ 1.844441] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[ 1.844497] [drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[ 1.844549] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[ 1.844654] [drm:intel_edp_backlight_off [i915]]
[ 1.855091] usb 1-1.1: new low-speed USB device number 4 using xhci_hcd
[ 1.902419] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 1.932849] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 1.932855] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 1.953236] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 3.00
[ 1.953241] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.953245] usb 1-1.1: Product: HP Basic USB Keyboard
[ 1.953248] usb 1-1.1: Manufacturer: CHICONY
[ 1.964663] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03F0:0024.0002/input/input9
[ 1.993153] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643
[ 2.016748] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1.1/input0
[ 2.032768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.048234] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[ 2.048371] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
[ 2.048513] [drm:intel_disable_pipe [i915]] disabling pipe A
[ 2.056688] [drm:intel_edp_panel_off.part.38 [i915]] Turn eDP port A panel power off
[ 2.056833] [drm:intel_edp_panel_off.part.38 [i915]] Wait for panel power off time
[ 2.057000] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000000
[ 2.057362] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010
[ 2.057489] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
[ 2.057618] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
[ 2.059114] usb 1-3: new full-speed USB device number 5 using xhci_hcd
[ 2.107654] [drm:wait_panel_status [i915]] Wait complete
[ 2.107788] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[ 2.107931] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[ 2.108068] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[ 2.108199] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[ 2.108325] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[ 2.108451] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 2.108678] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[ 2.108782] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DDI B]
[ 2.108885] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP-MST A]
[ 2.109000] [drm:intel_atomic_commit_tail [i915]] [ENCODER:82:DP-MST B]
[ 2.109123] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[ 2.109237] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DP-MST C]
[ 2.109365] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 2.109477] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DDI C]
[ 2.109598] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[ 2.109703] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST A]
[ 2.109794] [drm:intel_atomic_commit_tail [i915]] [ENCODER:93:DP-MST B]
[ 2.109885] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST C]
[ 2.109985] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[ 2.110083] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[ 2.110186] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[ 2.110280] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[ 2.110393] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[ 2.110495] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[ 2.188166] usb 1-3: New USB device found, idVendor=0a5c, idProduct=6412, bcdDevice= 1.12
[ 2.188171] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.188174] usb 1-3: Product: BCM2045A0
[ 2.188177] usb 1-3: Manufacturer: Broadcom Corp
[ 2.188180] usb 1-3: SerialNumber: 3052CBE75430
[ 2.261099] usb 1-1.3: new full-speed USB device number 6 using xhci_hcd
[ 2.353400] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=1130, bcdDevice= 1.10
[ 2.353406] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.353409] usb 1-1.3: Product: Wireless Device
[ 2.353413] usb 1-1.3: Manufacturer: Chicony
[ 2.364131] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04F2:1130.0003/input/input10
[ 2.416617] hid-generic 0003:04F2:1130.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:14.0-1.3/input0
[ 2.419295] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F2:1130.0004/input/input11
[ 2.463220] usb 1-4: new full-speed USB device number 7 using xhci_hcd
[ 2.471889] hid-generic 0003:04F2:1130.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Chicony Wireless Device] on usb-0000:00:14.0-1.3/input1
[ 2.473920] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:04F2:1130.0005/input/input12
[ 2.474326] hid-generic 0003:04F2:1130.0005: input,hidraw4: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:14.0-1.3/input2
[ 2.592345] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0, bcdDevice=11.12
[ 2.592351] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 2.592355] usb 1-4: Product: Touchscreen
[ 2.592359] usb 1-4: Manufacturer: ELAN
[ 2.602916] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0006/input/input13
[ 2.603516] hid-generic 0003:04F3:20D0.0006: input,hiddev97,hidraw5: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 2.717215] usb 1-5: new high-speed USB device number 8 using xhci_hcd
[ 2.720411] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
[ 2.720546] [drm:wait_panel_status [i915]] Wait complete
[ 2.720701] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008
[ 2.720820] [drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled
[ 2.770906] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[ 2.771043] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 2.771168] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[ 2.886495] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682, bcdDevice=48.14
[ 2.886501] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.886506] usb 1-5: Product: Integrated_Webcam_HD
[ 2.886510] usb 1-5: Manufacturer: CKFEH41I451030002442
[ 2.886514] usb 1-5: SerialNumber: 200901010001
[ 2.922332] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0006/input/input14
[ 2.922597] hid-multitouch 0003:04F3:20D0.0006: input,hiddev97,hidraw5: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 2.928232] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
[ 2.928285] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[ 2.928381] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000008
[ 2.928428] [drm:wait_panel_status [i915]] Wait complete
[ 2.928488] [drm:edp_panel_on [i915]] Wait for panel power on
[ 2.928578] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 0000000b
[ 3.128848] [drm:wait_panel_status [i915]] Wait complete
[ 3.129045] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[ 3.129379] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00
[ 3.129919] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[ 3.130109] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions
[ 3.130283] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
[ 3.130458] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event.
[ 3.130803] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[ 3.130943] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[ 3.131080] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[ 3.131227] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[ 3.132035] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.132177] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.132303] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.133098] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[ 3.133243] [drm:intel_dp_start_link_train [i915]] 5.4 Gbps link rate without sink TPS3 support
[ 3.133372] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[ 3.134477] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.134602] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.134725] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.135819] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[ 3.135950] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[ 3.136762] [drm:intel_enable_pipe [i915]] enabling pipe A
[ 3.136926] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010
[ 3.137092] [drm:intel_edp_backlight_on [i915]]
[ 3.137263] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
[ 3.137434] [drm:intel_panel_enable_backlight [i915]] pipe A
[ 3.137591] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
[ 3.137755] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937
[ 3.137962] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
[ 3.138148] [drm:intel_fbc_enable [i915]] reserved 23040000 bytes of contiguous stolen space for FBC, threshold: 1
[ 3.138306] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00
[ 3.138473] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[ 3.158041] [drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[ 3.158223] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[ 3.158386] [drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
[ 3.158526] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[ 3.158660] [drm:intel_enable_sagv [i915]] Enabling the SAGV
[ 3.158706] Console: switching to colour frame buffer device 400x112
[ 3.158891] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 3.159032] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.159183] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 3.159300] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 3.159753] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 3.161174] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
[ 3.161642] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[ 3.161761] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[ 3.161876] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[ 3.161988] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[ 3.162772] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.162881] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.162990] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.163768] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[ 3.163882] [drm:intel_dp_start_link_train [i915]] 5.4 Gbps link rate without sink TPS3 support
[ 3.163994] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[ 3.165086] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.165208] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.165316] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.166384] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[ 3.166498] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[ 3.178841] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010
[ 3.178995] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
[ 3.179224] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions
[ 3.179393] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
[ 3.179545] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event.
[ 3.180009] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00
[ 3.199768] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 3.199942] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.200101] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 3.200278] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 3.200738] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 3.202187] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
[ 3.202684] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[ 3.202831] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[ 3.202973] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[ 3.203117] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[ 3.203932] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.204074] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.204223] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.205011] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[ 3.205164] [drm:intel_dp_start_link_train [i915]] 5.4 Gbps link rate without sink TPS3 support
[ 3.205306] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[ 3.206408] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.206551] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.206688] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.207774] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.207913] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.208050] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.209154] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.209292] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.209427] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.210511] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.210648] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.210784] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.211870] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 3.212007] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 3.212149] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 3.212480] [drm:intel_dp_dump_link_status [i915]] ln0_1:0x11 ln2_3:0x11 align:0x0 sink:0x0 adj_req0_1:0x66 adj_req2_3:0x66
[ 3.212620] [drm:intel_dp_start_link_train [i915]] Channel equalization failed 5 times
[ 3.212758] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training failed at link rate = 540000, lane count = 4
[ 3.212917] [drm:intel_dp_modeset_retry_work_fn [i915]] [CONNECTOR:71:eDP-1]
[ 3.213712] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010
[ 3.213846] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
[ 3.214040] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
[ 3.214671] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00
[ 3.220429] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions
[ 3.220593] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event.
[ 3.220743] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 3.220865] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.220970] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 3.221073] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 3.221532] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 3.236608] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.242081] [drm:drm_fb_helper_hotplug_event.part.34 [drm_kms_helper]]
[ 3.242103] [drm:drm_setup_crtcs [drm_kms_helper]]
[ 3.242124] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[ 3.242225] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 3.242328] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.242424] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 3.242522] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 3.242990] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 3.243388] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.243437] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 3.243476] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.243587] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[ 3.243636] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 3.243681] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 3.243704] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1]
[ 3.243821] [drm:intel_dp_detect [i915]] [CONNECTOR:80:DP-1]
[ 3.243923] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 3.244037] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 3.244103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] disconnected
[ 3.244125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1]
[ 3.244239] [drm:intel_hdmi_detect [i915]] [CONNECTOR:86:HDMI-A-1]
[ 3.244559] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.244664] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.244955] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 3.245014] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.245139] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.245251] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 3.249222] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 3.249348] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 3.249706] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.249818] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 3.250141] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 3.250195] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.250219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] disconnected
[ 3.250242] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2]
[ 3.250352] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-2]
[ 3.250446] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 3.250559] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 3.250590] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] disconnected
[ 3.250611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2]
[ 3.250717] [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-2]
[ 3.251030] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.251154] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.251462] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 3.251521] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.251629] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.251720] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 3.254500] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 3.254611] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 3.254912] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.255013] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 3.255301] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 3.255340] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 3.255364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] disconnected
[ 3.255389] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[ 3.255406] [drm:drm_setup_crtcs [drm_kms_helper]] connector 80 enabled? no
[ 3.255422] [drm:drm_setup_crtcs [drm_kms_helper]] connector 86 enabled? no
[ 3.255439] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
[ 3.255454] [drm:drm_setup_crtcs [drm_kms_helper]] connector 96 enabled? no
[ 3.255557] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[ 3.255577] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[ 3.255595] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[ 3.255615] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3200x1800
[ 3.255633] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 3200x1800 config
[ 3.257182] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[ 3.257297] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 3.257404] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 3.257509] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 3.257603] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 3.257664] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3200x1800 set on crtc 41 (0,0)
[ 3.258994] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 3.259415] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.259467] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 3.259509] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 3.259619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[ 3.259666] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 3.259711] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 3.259886] [drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[ 3.259984] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[ 3.260033] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 3.260145] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max rate 270000 max bpp 24 pixel clock 298600KHz
[ 3.260237] [drm:intel_dp_compute_config [i915]] DP lane count 4 clock 270000 bpp 24
[ 3.260325] [drm:intel_dp_compute_config [i915]] DP link rate required 895800 available 1080000
[ 3.260428] [drm:intel_dp_compute_config [i915]] PSR disable by flag
[ 3.260523] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 3.260618] [drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[ 3.260712] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[ 3.260803] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[ 3.260895] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 6957884, gmch_n: 8388608, link_m: 579823, link_n: 524288, tu: 64
[ 3.260984] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[ 3.261074] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 3.261125] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 3.261213] [drm:intel_dump_pipe_config [i915]] adjusted mode:
[ 3.261252] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 3.261345] [drm:intel_dump_pipe_config [i915]] crtc timings: 298600 3200 3248 3280 3360 1800 1803 1808 1852, type: 0x40 flags: 0xa
[ 3.261434] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 3200x1800, pixel rate 298600
[ 3.261524] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[ 3.261612] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.261700] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[ 3.261789] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[ 3.261874] [drm:intel_dump_pipe_config [i915]] planes on this crtc
[ 3.261966] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] FB:99, fb = 3200x1800 format = XR24 little-endian (0x34325258)
[ 3.262058] [drm:intel_dump_pipe_config [i915]] scaler:-1 src 0x0+3200+1800 dst 0x0+3200+1800
[ 3.262152] [drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[ 3.262239] [drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[ 3.262333] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[ 3.262422] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[ 3.262524] [drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[ 3.262614] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[ 3.262783] [drm:intel_edp_backlight_off [i915]]
[ 3.464254] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[ 3.464331] [drm:intel_disable_pipe [i915]] disabling pipe A
[ 3.472727] [drm:intel_edp_panel_off.part.38 [i915]] Turn eDP port A panel power off
[ 3.472797] [drm:intel_edp_panel_off.part.38 [i915]] Wait for panel power off time
[ 3.472898] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
[ 3.524698] [drm:wait_panel_status [i915]] Wait complete
[ 3.524789] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[ 3.524914] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[ 3.525035] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[ 3.525171] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[ 3.525283] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 3.525390] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[ 3.525528] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[ 3.525659] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[ 3.525771] [drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[ 3.525882] [drm:intel_atomic_commit_tail [i915]] [ENCODER:79:DDI B]
[ 3.525991] [drm:intel_atomic_commit_tail [i915]] [ENCODER:81:DP-MST A]
[ 3.526097] [drm:intel_atomic_commit_tail [i915]] [ENCODER:82:DP-MST B]
[ 3.526216] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DP-MST C]
[ 3.526320] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DDI C]
[ 3.526422] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST A]
[ 3.526525] [drm:intel_atomic_commit_tail [i915]] [ENCODER:93:DP-MST B]
[ 3.526628] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST C]
[ 3.526733] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[ 3.526841] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[ 3.526947] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[ 3.527052] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[ 3.527178] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[ 3.527282] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[ 3.527410] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
[ 3.527523] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[ 4.128466] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
[ 4.128610] [drm:wait_panel_status [i915]] Wait complete
[ 4.128760] [drm:edp_panel_on [i915]] Wait for panel power on
[ 4.128939] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003
[ 4.179281] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[ 4.179423] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[ 4.179564] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[ 4.179787] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[ 4.329535] [drm:wait_panel_status [i915]] Wait complete
[ 4.329652] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[ 4.329821] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[ 4.330002] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
[ 4.330961] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 0a
[ 4.331446] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[ 4.331567] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[ 4.331686] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[ 4.331803] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[ 4.332620] [drm:intel_dp_start_link_train [i915]] clock recovery OK
[ 4.332734] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
[ 4.333838] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 08000000
[ 4.333950] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 2
[ 4.334073] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
[ 4.335048] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[ 4.335079] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 4
[ 4.335505] [drm:intel_enable_pipe [i915]] enabling pipe A
[ 4.335542] [drm:intel_edp_backlight_on [i915]]
[ 4.335572] [drm:intel_panel_enable_backlight [i915]] pipe A
[ 4.335655] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937
[ 4.335722] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
[ 4.335755] [drm:intel_fbc_enable [i915]] reserved 23040000 bytes of contiguous stolen space for FBC, threshold: 1
[ 4.335785] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[ 4.356640] [drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[ 4.356689] [drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[ 4.356743] [drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[ 4.356793] [drm:drm_fb_helper_hotplug_event.part.34 [drm_kms_helper]]
[ 4.356799] [drm:drm_setup_crtcs [drm_kms_helper]]
[ 4.356808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[ 4.356850] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 4.356895] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 4.356936] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 4.356975] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 4.357390] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 4.357712] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 4.357729] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 4.357743] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 4.357797] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[ 4.357812] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 4.357826] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 4.357834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1]
[ 4.357873] [drm:intel_dp_detect [i915]] [CONNECTOR:80:DP-1]
[ 4.357904] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.357953] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.357965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] disconnected
[ 4.357972] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1]
[ 4.358010] [drm:intel_hdmi_detect [i915]] [CONNECTOR:86:HDMI-A-1]
[ 4.358254] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.358289] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.358506] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.358535] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.358590] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.358633] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 4.361333] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.361375] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 4.361632] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.361673] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.361899] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.361924] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.361932] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] disconnected
[ 4.361940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2]
[ 4.361984] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-2]
[ 4.362020] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.362075] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.362089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] disconnected
[ 4.362097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2]
[ 4.362139] [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-2]
[ 4.362383] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.362424] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.362651] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.362675] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.362696] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.362718] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 4.365387] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.365413] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 4.365640] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.365661] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.365864] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.365885] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.365890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] disconnected
[ 4.365900] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[ 4.365906] [drm:drm_setup_crtcs [drm_kms_helper]] connector 80 enabled? no
[ 4.365910] [drm:drm_setup_crtcs [drm_kms_helper]] connector 86 enabled? no
[ 4.365914] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
[ 4.365917] [drm:drm_setup_crtcs [drm_kms_helper]] connector 96 enabled? no
[ 4.365942] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[ 4.365947] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[ 4.365951] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[ 4.365955] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3200x1800
[ 4.365958] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 3200x1800 config
[ 4.365965] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3200x1800 set on crtc 41 (0,0)
[ 4.376213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1]
[ 4.377496] [drm:intel_dp_detect [i915]] [CONNECTOR:80:DP-1]
[ 4.377519] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.377555] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.377565] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] disconnected
[ 4.398374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1]
[ 4.398382] [drm:drm_fb_helper_hotplug_event.part.34 [drm_kms_helper]]
[ 4.398428] [drm:intel_hdmi_detect [i915]] [CONNECTOR:86:HDMI-A-1]
[ 4.398433] [drm:drm_setup_crtcs [drm_kms_helper]]
[ 4.398758] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.398801] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.399111] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.399144] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.399186] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.399226] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 4.401936] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.401983] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 4.402315] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.402361] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.402589] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.402614] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.402624] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] disconnected
[ 4.402648] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2]
[ 4.402696] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-2]
[ 4.402741] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.402794] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.402808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] disconnected
[ 4.402819] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[ 4.402861] [drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[ 4.402900] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[ 4.402935] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[ 4.402970] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[ 4.403374] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[ 4.403691] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 4.403707] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[ 4.403719] [drm:drm_add_display_info [drm]] non_desktop set to 0
[ 4.403753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[ 4.403766] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"3200x1800" 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
[ 4.403779] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"3200x1800" 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
[ 4.403785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1]
[ 4.403820] [drm:intel_dp_detect [i915]] [CONNECTOR:80:DP-1]
[ 4.403845] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.403883] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.403893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:80:DP-1] disconnected
[ 4.403900] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1]
[ 4.403938] [drm:intel_hdmi_detect [i915]] [CONNECTOR:86:HDMI-A-1]
[ 4.404172] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.404203] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.404416] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[ 4.404443] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.404473] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.404504] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 4.407184] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
[ 4.407217] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 4.407531] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.407561] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
[ 4.407773] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[ 4.407794] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.407801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:86:HDMI-A-1] disconnected
[ 4.407807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2]
[ 4.407838] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-2]
[ 4.407864] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 4.407902] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 4.407912] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-2] disconnected
[ 4.407918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2]
[ 4.407949] [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-2]
[ 4.408181] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.408210] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.408507] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.408535] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.408565] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.408596] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 4.411275] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.411307] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 4.411535] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.411565] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.411862] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.411884] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.411889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] disconnected
[ 4.411895] [drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[ 4.411901] [drm:drm_setup_crtcs [drm_kms_helper]] connector 80 enabled? no
[ 4.411906] [drm:drm_setup_crtcs [drm_kms_helper]] connector 86 enabled? no
[ 4.411911] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
[ 4.411915] [drm:drm_setup_crtcs [drm_kms_helper]] connector 96 enabled? no
[ 4.411948] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
[ 4.411955] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[ 4.411960] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[ 4.411965] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3200x1800
[ 4.411970] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 3200x1800 config
[ 4.411980] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3200x1800 set on crtc 41 (0,0)
[ 4.411995] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2]
[ 4.420085] [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-2]
[ 4.420337] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.420371] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.420606] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[ 4.420636] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.420668] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.420700] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
[ 4.423398] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
[ 4.423435] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
[ 4.423680] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.423712] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
[ 4.423939] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[ 4.423964] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6)
[ 4.423970] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:96:HDMI-A-2] disconnected
[ 4.424031] [drm:drm_mode_addfb2 [drm]] [FB:101]
[ 4.679497] audit: type=1130 audit(1526663356.011:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.838982] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.082265] kauditd_printk_skb: 4 callbacks suppressed
[ 5.082270] audit: type=1131 audit(1526663356.414:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.084202] audit: type=1130 audit(1526663356.416:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.084216] audit: type=1131 audit(1526663356.416:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.086886] audit: type=1130 audit(1526663356.418:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.086928] audit: type=1131 audit(1526663356.418:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.088292] audit: type=1130 audit(1526663356.420:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.088329] audit: type=1131 audit(1526663356.420:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.090053] audit: type=1130 audit(1526663356.421:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.090259] audit: type=1131 audit(1526663356.422:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.099790] audit: type=1130 audit(1526663356.431:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.185324] systemd-journald[231]: Received SIGTERM from PID 1 (systemd).
[ 5.200407] systemd: 18 output lines suppressed due to ratelimiting
[ 5.255515] SELinux: Disabled at runtime.
[ 5.255603] SELinux: Unregistering netfilter hooks
[ 5.307353] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.319764] systemd[1]: Detected architecture x86-64.
[ 5.321375] systemd[1]: Set hostname to <ldmartin-desk.amr.corp.intel.com>.
[ 5.465434] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:7: Unknown lvalue 'Server' in section 'Socket'
[ 5.492621] systemd[1]: Stopped Switch Root.
[ 5.492740] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[ 5.492804] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 5.492817] systemd[1]: Stopped Journal Service.
[ 5.493595] systemd[1]: Starting Journal Service...
[ 5.493691] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.519732] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.561231] systemd-journald[579]: Received request to flush runtime journal from PID 1
[ 5.586443] systemd-journald[579]: File /var/log/journal/e8982e38eb8f49a99d3ce64b9f1ebb71/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.602791] random: crng init done
[ 5.602793] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.697965] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.699924] acpi INT33D5:00: intel-hid: created platform device
[ 5.704492] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.704675] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20180313/nspredef-263)
[ 5.704683] ACPI: Invalid package element [0]: got number, expecting [R]
[ 5.704684] _ART package 0 is invalid, ignored
[ 5.710622] input: Intel HID events as /devices/platform/INT33D5:00/input/input18
[ 5.727944] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 5.728237] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.745405] i2c_hid i2c-DLL0704:01: i2c-DLL0704:01 supply vdd not found, using dummy regulator
[ 5.765380] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 5.783768] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL0704:01/0018:06CB:76AE.0007/input/input20
[ 5.783873] hid-multitouch 0018:06CB:76AE.0007: input,hidraw6: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 5.786420] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 5.790288] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=937/937
[ 5.790328] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 937
[ 5.791335] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.806666] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.828962] media: Linux media interface: v0.10
[ 5.851882] Linux video capture interface: v2.00
[ 5.862950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.872572] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.872610] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.889533] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 5.893555] input: PC Speaker as /devices/platform/pcspkr/input/input25
[ 5.915493] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.915496] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 5.915498] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.915499] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.915570] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input26
[ 5.915640] usbcore: registered new interface driver uvcvideo
[ 5.915641] USB Video Class driver (1.1.1)
[ 5.928561] Bluetooth: Core ver 2.22
[ 5.928578] NET: Registered protocol family 31
[ 5.928579] Bluetooth: HCI device and connection manager initialized
[ 5.928582] Bluetooth: HCI socket layer initialized
[ 5.928584] Bluetooth: L2CAP socket layer initialized
[ 5.928590] Bluetooth: SCO socket layer initialized
[ 5.958317] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 5.958465] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.958466] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.958467] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.958468] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.958468] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.965713] usbcore: registered new interface driver btusb
[ 5.966335] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.977503] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.016358] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.017330] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.017918] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.017920] cfg80211: failed to load regulatory.db
[ 6.019210] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.026757] [drm:intel_power_well_enable [i915]] enabling power well 2
[ 6.065468] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input27
[ 6.087902] Adding 8126460k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:8126460k SSFS
[ 6.093506] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.093509] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.093511] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.093512] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.093514] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.093516] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.093518] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.093519] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.094483] usbcore: registered new interface driver brcmfmac
[ 6.094558] brcmfmac 0000:3a:00.0: enabling device (0000 -> 0002)
[ 6.108308] intel_rapl: Found RAPL domain package
[ 6.108310] intel_rapl: Found RAPL domain core
[ 6.108311] intel_rapl: Found RAPL domain uncore
[ 6.108312] intel_rapl: Found RAPL domain dram
[ 6.166351] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 6.166377] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 6.166400] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
[ 6.166423] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 6.166444] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 6.166466] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
[ 6.166488] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 6.166509] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 6.166530] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
[ 6.168285] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 6.168351] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 6.168401] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 6.168452] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 6.168500] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 6.168548] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 6.168641] [drm:intel_power_well_disable [i915]] disabling power well 2
[ 6.200434] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4350-pcie for chip BCM4350/8
[ 6.202146] brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.txt failed with error -2
[ 6.470514] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.604600] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4350-pcie for chip BCM4350/8
[ 6.604635] brcmfmac 0000:3a:00.0: Direct firmware load for brcm/brcmfmac4350-pcie.clm_blob failed with error -2
[ 6.604638] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 6.606076] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4350/8 wl0: Oct 22 2015 06:16:26 version 7.35.180.119 (r594535) FWID 01-e791c176
[ 6.681155] brcmfmac 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 6.750977] [drm:drm_mode_addfb2 [drm]] [FB:98]
[ 6.751053] [drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[ 6.751070] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[ 6.778090] [drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[ 6.778105] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[ 7.456238] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[ 7.456401] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
[ 7.456490] [drm:intel_power_well_disable [i915]] disabling DC off
[ 7.456580] [drm:gen9_dc_off_power_well_disable [i915]] Enabling DC6
[ 7.456666] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[ 8.139628] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.228760] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.269456] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.777510] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 9.994747] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 10.049000] tun: Universal TUN/TAP device driver, 1.6
[ 10.078602] virbr0: port 1(virbr0-nic) entered blocking state
[ 10.078615] virbr0: port 1(virbr0-nic) entered disabled state
[ 10.078685] device virbr0-nic entered promiscuous mode
[ 10.171509] virbr0: port 1(virbr0-nic) entered blocking state
[ 10.171511] virbr0: port 1(virbr0-nic) entered listening state
[ 10.218488] virbr0: port 1(virbr0-nic) entered disabled state
[ 12.848148] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 17.981262] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 19.874486] systemd-journald[579]: File /var/log/journal/e8982e38eb8f49a99d3ce64b9f1ebb71/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
