Re: [PATCH] drm/i915/psr: Nuke PSR support for VLV and CHV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2018-05-11 at 16:00 -0700, Dhinakaran Pandiyan wrote:
> PSR hardware and hence the driver code for VLV and CHV deviates a lot
> from
> their DDI counterparts. While the feature has been disabled for a
> long time
> now, retaining support for these platforms is a maintenance burden.
> There
> have been multiple refactoring commits to just keep the existing code
> for
> these platforms in line with the rest. There are known issues that
> need to
> be fixed to enable PSR on these platforms, and there is no PSR
> capable
> platform in CI to ensure the code does not break again if we get
> around to
> fixing the existing issues. On account of all these reasons, let's
> nuke
> this code for now and bring it back if a need arises in the future.
> 
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Reviewed-by: José Roberto de Souza <jose.souza@xxxxxxxxx>

Really happy to see and review this patch :D


> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c      |  42 +-----
>  drivers/gpu/drm/i915/i915_drv.h          |   1 -
>  drivers/gpu/drm/i915/i915_pci.c          |   2 -
>  drivers/gpu/drm/i915/intel_drv.h         |   2 -
>  drivers/gpu/drm/i915/intel_frontbuffer.c |   2 -
>  drivers/gpu/drm/i915/intel_psr.c         | 248 +++----------------
> ------------
>  6 files changed, 27 insertions(+), 270 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> b/drivers/gpu/drm/i915/i915_debugfs.c
> index 13e7b9e4a6e6..0096e209fe04 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2630,8 +2630,6 @@ static int i915_edp_psr_status(struct seq_file
> *m, void *data)
>  {
>  	struct drm_i915_private *dev_priv = node_to_i915(m-
> >private);
>  	u32 psrperf = 0;
> -	u32 stat[3];
> -	enum pipe pipe;
>  	bool enabled = false;
>  	bool sink_support;
>  
> @@ -2652,47 +2650,17 @@ static int i915_edp_psr_status(struct
> seq_file *m, void *data)
>  	seq_printf(m, "Re-enable work scheduled: %s\n",
>  		   yesno(work_busy(&dev_priv->psr.work.work)));
>  
> -	if (HAS_DDI(dev_priv)) {
> -		if (dev_priv->psr.psr2_enabled)
> -			enabled = I915_READ(EDP_PSR2_CTL) &
> EDP_PSR2_ENABLE;
> -		else
> -			enabled = I915_READ(EDP_PSR_CTL) &
> EDP_PSR_ENABLE;
> -	} else {
> -		for_each_pipe(dev_priv, pipe) {
> -			enum transcoder cpu_transcoder =
> -				intel_pipe_to_cpu_transcoder(dev_pri
> v, pipe);
> -			enum intel_display_power_domain
> power_domain;
> -
> -			power_domain =
> POWER_DOMAIN_TRANSCODER(cpu_transcoder);
> -			if
> (!intel_display_power_get_if_enabled(dev_priv,
> -								powe
> r_domain))
> -				continue;
> -
> -			stat[pipe] = I915_READ(VLV_PSRSTAT(pipe)) &
> -				VLV_EDP_PSR_CURR_STATE_MASK;
> -			if ((stat[pipe] ==
> VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
> -			    (stat[pipe] ==
> VLV_EDP_PSR_ACTIVE_SF_UPDATE))
> -				enabled = true;
> -
> -			intel_display_power_put(dev_priv,
> power_domain);
> -		}
> -	}
> +	if (dev_priv->psr.psr2_enabled)
> +		enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
> +	else
> +		enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
>  
>  	seq_printf(m, "Main link in standby mode: %s\n",
>  		   yesno(dev_priv->psr.link_standby));
>  
> -	seq_printf(m, "HW Enabled & Active bit: %s",
> yesno(enabled));
> -
> -	if (!HAS_DDI(dev_priv))
> -		for_each_pipe(dev_priv, pipe) {
> -			if ((stat[pipe] ==
> VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
> -			    (stat[pipe] ==
> VLV_EDP_PSR_ACTIVE_SF_UPDATE))
> -				seq_printf(m, " pipe %c",
> pipe_name(pipe));
> -		}
> -	seq_puts(m, "\n");
> +	seq_printf(m, "HW Enabled & Active bit: %s\n",
> yesno(enabled));
>  
>  	/*
> -	 * VLV/CHV PSR has no kind of performance counter
>  	 * SKL+ Perf counter is reset to 0 everytime DC state is
> entered
>  	 */
>  	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
> diff --git a/drivers/gpu/drm/i915/i915_drv.h
> b/drivers/gpu/drm/i915/i915_drv.h
> index 57fb3aa09db0..7e2a400d33c3 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -607,7 +607,6 @@ struct i915_psr {
>  	bool link_standby;
>  	bool colorimetry_support;
>  	bool alpm;
> -	bool has_hw_tracking;
>  	bool psr2_enabled;
>  	u8 sink_sync_latency;
>  	bool debug;
> diff --git a/drivers/gpu/drm/i915/i915_pci.c
> b/drivers/gpu/drm/i915/i915_pci.c
> index 4364922e935d..97a91e6af7e3 100644
> --- a/drivers/gpu/drm/i915/i915_pci.c
> +++ b/drivers/gpu/drm/i915/i915_pci.c
> @@ -340,7 +340,6 @@ static const struct intel_device_info
> intel_valleyview_info = {
>  	GEN(7),
>  	.is_lp = 1,
>  	.num_pipes = 2,
> -	.has_psr = 1,
>  	.has_runtime_pm = 1,
>  	.has_rc6 = 1,
>  	.has_gmch_display = 1,
> @@ -433,7 +432,6 @@ static const struct intel_device_info
> intel_cherryview_info = {
>  	.is_lp = 1,
>  	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
>  	.has_64bit_reloc = 1,
> -	.has_psr = 1,
>  	.has_runtime_pm = 1,
>  	.has_resource_streamer = 1,
>  	.has_rc6 = 1,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index d7dbca1aabff..a2b4018803ab 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1913,8 +1913,6 @@ void intel_psr_flush(struct drm_i915_private
> *dev_priv,
>  		     unsigned frontbuffer_bits,
>  		     enum fb_op_origin origin);
>  void intel_psr_init(struct drm_i915_private *dev_priv);
> -void intel_psr_single_frame_update(struct drm_i915_private
> *dev_priv,
> -				   unsigned frontbuffer_bits);
>  void intel_psr_compute_config(struct intel_dp *intel_dp,
>  			      struct intel_crtc_state *crtc_state);
>  void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool
> debug);
> diff --git a/drivers/gpu/drm/i915/intel_frontbuffer.c
> b/drivers/gpu/drm/i915/intel_frontbuffer.c
> index 7fff0a0eceb4..c3379bde266f 100644
> --- a/drivers/gpu/drm/i915/intel_frontbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_frontbuffer.c
> @@ -153,8 +153,6 @@ void intel_frontbuffer_flip_prepare(struct
> drm_i915_private *dev_priv,
>  	/* Remove stale busy bits due to the old buffer. */
>  	dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
>  	spin_unlock(&dev_priv->fb_tracking.lock);
> -
> -	intel_psr_single_frame_update(dev_priv, frontbuffer_bits);
>  }
>  
>  /**
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index db27f2faa1de..29443d2c35bb 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -97,10 +97,6 @@ void intel_psr_irq_control(struct drm_i915_private
> *dev_priv, bool debug)
>  {
>  	u32 debug_mask, mask;
>  
> -	/* No PSR interrupts on VLV/CHV */
> -	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> -		return;
> -
>  	mask = EDP_PSR_ERROR(TRANSCODER_EDP);
>  	debug_mask = EDP_PSR_POST_EXIT(TRANSCODER_EDP) |
>  		     EDP_PSR_PRE_ENTRY(TRANSCODER_EDP);
> @@ -284,31 +280,6 @@ void intel_psr_init_dpcd(struct intel_dp
> *intel_dp)
>  	}
>  }
>  
> -static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int
> pipe)
> -{
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	uint32_t val;
> -
> -	val = I915_READ(VLV_PSRSTAT(pipe)) &
> -	      VLV_EDP_PSR_CURR_STATE_MASK;
> -	return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
> -	       (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
> -}
> -
> -static void vlv_psr_setup_vsc(struct intel_dp *intel_dp,
> -			      const struct intel_crtc_state
> *crtc_state)
> -{
> -	struct intel_crtc *crtc = to_intel_crtc(crtc_state-
> >base.crtc);
> -	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -	uint32_t val;
> -
> -	/* VLV auto-generate VSC package as per EDP 1.3 spec, Table
> 3.10 */
> -	val  = I915_READ(VLV_VSCSDP(crtc->pipe));
> -	val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
> -	val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
> -	I915_WRITE(VLV_VSCSDP(crtc->pipe), val);
> -}
> -
>  static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
>  			      const struct intel_crtc_state
> *crtc_state)
>  {
> @@ -341,12 +312,6 @@ static void hsw_psr_setup_vsc(struct intel_dp
> *intel_dp,
>  					DP_SDP_VSC, &psr_vsc,
> sizeof(psr_vsc));
>  }
>  
> -static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
> -{
> -	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
> -			   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
> -}
> -
>  static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> @@ -403,38 +368,6 @@ static void hsw_psr_enable_sink(struct intel_dp
> *intel_dp)
>  	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
>  }
>  
> -static void vlv_psr_enable_source(struct intel_dp *intel_dp,
> -				  const struct intel_crtc_state
> *crtc_state)
> -{
> -	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> -	struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> -	struct intel_crtc *crtc = to_intel_crtc(crtc_state-
> >base.crtc);
> -
> -	/* Transition from PSR_state 0 (disabled) to PSR_state 1
> (inactive) */
> -	I915_WRITE(VLV_PSRCTL(crtc->pipe),
> -		   VLV_EDP_PSR_MODE_SW_TIMER |
> -		   VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
> -		   VLV_EDP_PSR_ENABLE);
> -}
> -
> -static void vlv_psr_activate(struct intel_dp *intel_dp)
> -{
> -	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> -	struct drm_device *dev = dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	struct drm_crtc *crtc = dig_port->base.base.crtc;
> -	enum pipe pipe = to_intel_crtc(crtc)->pipe;
> -
> -	/*
> -	 * Let's do the transition from PSR_state 1 (inactive) to
> -	 * PSR_state 2 (transition to active - static frame
> transmission).
> -	 * Then Hardware is responsible for the transition to
> -	 * PSR_state 3 (active - no Remote Frame Buffer (RFB)
> update).
> -	 */
> -	I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
> -		   VLV_EDP_PSR_ACTIVE_ENTRY);
> -}
> -
>  static void hsw_activate_psr1(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> @@ -602,17 +535,11 @@ void intel_psr_compute_config(struct intel_dp
> *intel_dp,
>  	 * ones. Since by Display design transcoder EDP is tied to
> port A
>  	 * we can safely escape based on the port A.
>  	 */
> -	if (HAS_DDI(dev_priv) && dig_port->base.port != PORT_A) {
> +	if (dig_port->base.port != PORT_A) {
>  		DRM_DEBUG_KMS("PSR condition failed: Port not
> supported\n");
>  		return;
>  	}
>  
> -	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
> -	    !dev_priv->psr.link_standby) {
> -		DRM_ERROR("PSR condition failed: Link off requested
> but not supported on this platform\n");
> -		return;
> -	}
> -
>  	if (IS_HASWELL(dev_priv) &&
>  	    I915_READ(HSW_STEREO_3D_CTL(crtc_state->cpu_transcoder)) 
> &
>  		      S3D_ENABLE) {
> @@ -760,7 +687,6 @@ void intel_psr_enable(struct intel_dp *intel_dp,
>  		 * enabled.
>  		 * However on some platforms we face issues when
> first
>  		 * activation follows a modeset so quickly.
> -		 *     - On VLV/CHV we get bank screen on first
> activation
>  		 *     - On HSW/BDW we get a recoverable frozen
> screen until
>  		 *       next exit-activate sequence.
>  		 */
> @@ -772,36 +698,6 @@ void intel_psr_enable(struct intel_dp *intel_dp,
>  	mutex_unlock(&dev_priv->psr.lock);
>  }
>  
> -static void vlv_psr_disable(struct intel_dp *intel_dp,
> -			    const struct intel_crtc_state
> *old_crtc_state)
> -{
> -	struct intel_digital_port *intel_dig_port =
> dp_to_dig_port(intel_dp);
> -	struct drm_device *dev = intel_dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state-
> >base.crtc);
> -	uint32_t val;
> -
> -	if (dev_priv->psr.active) {
> -		/* Put VLV PSR back to PSR_state 0 (disabled). */
> -		if (intel_wait_for_register(dev_priv,
> -					    VLV_PSRSTAT(crtc->pipe),
> -					    VLV_EDP_PSR_IN_TRANS,
> -					    0,
> -					    1))
> -			WARN(1, "PSR transition took longer than
> expected\n");
> -
> -		val = I915_READ(VLV_PSRCTL(crtc->pipe));
> -		val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
> -		val &= ~VLV_EDP_PSR_ENABLE;
> -		val &= ~VLV_EDP_PSR_MODE_MASK;
> -		I915_WRITE(VLV_PSRCTL(crtc->pipe), val);
> -
> -		dev_priv->psr.active = false;
> -	} else {
> -		WARN_ON(vlv_is_psr_active_on_pipe(dev, crtc->pipe));
> -	}
> -}
> -
>  static void hsw_psr_disable(struct intel_dp *intel_dp,
>  			    const struct intel_crtc_state
> *old_crtc_state)
>  {
> @@ -894,21 +790,12 @@ static bool psr_wait_for_idle(struct
> drm_i915_private *dev_priv)
>  	if (!intel_dp)
>  		return false;
>  
> -	if (HAS_DDI(dev_priv)) {
> -		if (dev_priv->psr.psr2_enabled) {
> -			reg = EDP_PSR2_STATUS;
> -			mask = EDP_PSR2_STATUS_STATE_MASK;
> -		} else {
> -			reg = EDP_PSR_STATUS;
> -			mask = EDP_PSR_STATUS_STATE_MASK;
> -		}
> +	if (dev_priv->psr.psr2_enabled) {
> +		reg = EDP_PSR2_STATUS;
> +		mask = EDP_PSR2_STATUS_STATE_MASK;
>  	} else {
> -		struct drm_crtc *crtc =
> -			dp_to_dig_port(intel_dp)->base.base.crtc;
> -		enum pipe pipe = to_intel_crtc(crtc)->pipe;
> -
> -		reg = VLV_PSRSTAT(pipe);
> -		mask = VLV_EDP_PSR_IN_TRANS;
> +		reg = EDP_PSR_STATUS;
> +		mask = EDP_PSR_STATUS_STATE_MASK;
>  	}
>  
>  	mutex_unlock(&dev_priv->psr.lock);
> @@ -953,102 +840,23 @@ static void intel_psr_work(struct work_struct
> *work)
>  
>  static void intel_psr_exit(struct drm_i915_private *dev_priv)
>  {
> -	struct intel_dp *intel_dp = dev_priv->psr.enabled;
> -	struct drm_crtc *crtc = dp_to_dig_port(intel_dp)-
> >base.base.crtc;
> -	enum pipe pipe = to_intel_crtc(crtc)->pipe;
>  	u32 val;
>  
>  	if (!dev_priv->psr.active)
>  		return;
>  
> -	if (HAS_DDI(dev_priv)) {
> -		if (dev_priv->psr.psr2_enabled) {
> -			val = I915_READ(EDP_PSR2_CTL);
> -			WARN_ON(!(val & EDP_PSR2_ENABLE));
> -			I915_WRITE(EDP_PSR2_CTL, val &
> ~EDP_PSR2_ENABLE);
> -		} else {
> -			val = I915_READ(EDP_PSR_CTL);
> -			WARN_ON(!(val & EDP_PSR_ENABLE));
> -			I915_WRITE(EDP_PSR_CTL, val &
> ~EDP_PSR_ENABLE);
> -		}
> +	if (dev_priv->psr.psr2_enabled) {
> +		val = I915_READ(EDP_PSR2_CTL);
> +		WARN_ON(!(val & EDP_PSR2_ENABLE));
> +		I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
>  	} else {
> -		val = I915_READ(VLV_PSRCTL(pipe));
> -
> -		/*
> -		 * Here we do the transition drirectly from
> -		 * PSR_state 3 (active - no Remote Frame Buffer
> (RFB) update) to
> -		 * PSR_state 5 (exit).
> -		 * PSR State 4 (active with single frame update) can
> be skipped.
> -		 * On PSR_state 5 (exit) Hardware is responsible to
> transition
> -		 * back to PSR_state 1 (inactive).
> -		 * Now we are at Same state after
> vlv_psr_enable_source.
> -		 */
> -		val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
> -		I915_WRITE(VLV_PSRCTL(pipe), val);
> -
> -		/*
> -		 * Send AUX wake up - Spec says after transitioning
> to PSR
> -		 * active we have to send AUX wake up by writing 01h
> in DPCD
> -		 * 600h of sink device.
> -		 * XXX: This might slow down the transition, but
> without this
> -		 * HW doesn't complete the transition to PSR_state 1
> and we
> -		 * never get the screen updated.
> -		 */
> -		drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> -				   DP_SET_POWER_D0);
> +		val = I915_READ(EDP_PSR_CTL);
> +		WARN_ON(!(val & EDP_PSR_ENABLE));
> +		I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
>  	}
> -
>  	dev_priv->psr.active = false;
>  }
>  
> -/**
> - * intel_psr_single_frame_update - Single Frame Update
> - * @dev_priv: i915 device
> - * @frontbuffer_bits: frontbuffer plane tracking bits
> - *
> - * Some platforms support a single frame update feature that is used
> to
> - * send and update only one frame on Remote Frame Buffer.
> - * So far it is only implemented for Valleyview and Cherryview
> because
> - * hardware requires this to be done before a page flip.
> - */
> -void intel_psr_single_frame_update(struct drm_i915_private
> *dev_priv,
> -				   unsigned frontbuffer_bits)
> -{
> -	struct drm_crtc *crtc;
> -	enum pipe pipe;
> -	u32 val;
> -
> -	if (!CAN_PSR(dev_priv))
> -		return;
> -
> -	/*
> -	 * Single frame update is already supported on BDW+ but it
> requires
> -	 * many W/A and it isn't really needed.
> -	 */
> -	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
> -		return;
> -
> -	mutex_lock(&dev_priv->psr.lock);
> -	if (!dev_priv->psr.enabled) {
> -		mutex_unlock(&dev_priv->psr.lock);
> -		return;
> -	}
> -
> -	crtc = dp_to_dig_port(dev_priv->psr.enabled)-
> >base.base.crtc;
> -	pipe = to_intel_crtc(crtc)->pipe;
> -
> -	if (frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)) {
> -		val = I915_READ(VLV_PSRCTL(pipe));
> -
> -		/*
> -		 * We need to set this bit before writing registers
> for a flip.
> -		 * This bit will be self-clear when it gets to the
> PSR active state.
> -		 */
> -		I915_WRITE(VLV_PSRCTL(pipe), val |
> VLV_EDP_PSR_SINGLE_FRAME_UPDATE);
> -	}
> -	mutex_unlock(&dev_priv->psr.lock);
> -}
> -
>  /**
>   * intel_psr_invalidate - Invalidade PSR
>   * @dev_priv: i915 device
> @@ -1071,7 +879,7 @@ void intel_psr_invalidate(struct
> drm_i915_private *dev_priv,
>  	if (!CAN_PSR(dev_priv))
>  		return;
>  
> -	if (dev_priv->psr.has_hw_tracking && origin == ORIGIN_FLIP)
> +	if (origin == ORIGIN_FLIP)
>  		return;
>  
>  	mutex_lock(&dev_priv->psr.lock);
> @@ -1114,7 +922,7 @@ void intel_psr_flush(struct drm_i915_private
> *dev_priv,
>  	if (!CAN_PSR(dev_priv))
>  		return;
>  
> -	if (dev_priv->psr.has_hw_tracking && origin == ORIGIN_FLIP)
> +	if (origin == ORIGIN_FLIP)
>  		return;
>  
>  	mutex_lock(&dev_priv->psr.lock);
> @@ -1131,8 +939,7 @@ void intel_psr_flush(struct drm_i915_private
> *dev_priv,
>  
>  	/* By definition flush = invalidate + flush */
>  	if (frontbuffer_bits) {
> -		if (dev_priv->psr.psr2_enabled ||
> -		    IS_VALLEYVIEW(dev_priv) ||
> IS_CHERRYVIEW(dev_priv)) {
> +		if (dev_priv->psr.psr2_enabled) {
>  			intel_psr_exit(dev_priv);
>  		} else {
>  			/*
> @@ -1184,9 +991,6 @@ void intel_psr_init(struct drm_i915_private
> *dev_priv)
>  	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
>  		/* HSW and BDW require workarounds that we don't
> implement. */
>  		dev_priv->psr.link_standby = false;
> -	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> -		/* On VLV and CHV only standby mode is supported. */
> -		dev_priv->psr.link_standby = true;
>  	else
>  		/* For new platforms let's respect VBT back again */
>  		dev_priv->psr.link_standby = dev_priv-
> >vbt.psr.full_link;
> @@ -1204,18 +1008,10 @@ void intel_psr_init(struct drm_i915_private
> *dev_priv)
>  	INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
>  	mutex_init(&dev_priv->psr.lock);
>  
> -	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> -		dev_priv->psr.enable_source = vlv_psr_enable_source;
> -		dev_priv->psr.disable_source = vlv_psr_disable;
> -		dev_priv->psr.enable_sink = vlv_psr_enable_sink;
> -		dev_priv->psr.activate = vlv_psr_activate;
> -		dev_priv->psr.setup_vsc = vlv_psr_setup_vsc;
> -	} else {
> -		dev_priv->psr.has_hw_tracking = true;
> -		dev_priv->psr.enable_source = hsw_psr_enable_source;
> -		dev_priv->psr.disable_source = hsw_psr_disable;
> -		dev_priv->psr.enable_sink = hsw_psr_enable_sink;
> -		dev_priv->psr.activate = hsw_psr_activate;
> -		dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;
> -	}
> +	dev_priv->psr.enable_source = hsw_psr_enable_source;
> +	dev_priv->psr.disable_source = hsw_psr_disable;
> +	dev_priv->psr.enable_sink = hsw_psr_enable_sink;
> +	dev_priv->psr.activate = hsw_psr_activate;
> +	dev_priv->psr.setup_vsc = hsw_psr_setup_vsc;

In a further patch we should also kill this

> +
>  }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux