[PATCH 07/58] drm/i915/dp: convert to encoder disable/enable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DP is the first encoder which isn't simple. As

commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467
Author: Jesse Barnes <jbarnes at virtuousgeek.org>
Date:   Fri Aug 13 15:43:26 2010 -0700

    drm/i915: make sure eDP PLL is enabled at the right time

discovered, we need to enable the eDP PLL for the cpu port _before_ we
enable the pipes and planes. After a few more commits the current
solution is to enable the PLL in the dp mode_set function (because
this is the only encoder callback the crtc helper code calls before it
calls the crtc's commit function).

Now I suspect that we actually should enable/disable the entire cpu
eDP port before/after planes, but thanks to how the crtc helper code
assumes that you can disable an encoder without disabling it's crtc
right away, this won't work.

The result is that the current prepare/commit hooks don't touch the
eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp
dpms function. Hence we need to keep things (at least for now)
bug-for-bug compatible by using our own special dp dpms function and
keep everything else more-or-less as-is (just using our own
infrastrucutre now).

This mess can only be cleaned up once we control the entire modeset
sequence and can move things around freely.

v2: Squash unsupported dpms modes to OFF at the beginning of the DP
dpms function.

v3: Need to set the dpms state to off in dp_disable, otherwise this
breaks the newly added WARNs ...

v4: Rebased against edp panel off sequence changes in 3.6-rc2

Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 88 +++++++++++++++++++++--------------------
 1 file changed, 46 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 977d9d2..7ee954c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1250,10 +1250,9 @@ static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 	}
 }
 
-static void intel_dp_prepare(struct drm_encoder *encoder)
+static void intel_disable_dp(struct intel_encoder *encoder)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 
 	/* Make sure the panel is off before trying to change the mode. But also
 	 * ensure that we have vdd while we switch off the panel. */
@@ -1262,62 +1261,64 @@ static void intel_dp_prepare(struct drm_encoder *encoder)
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 	ironlake_edp_panel_off(intel_dp);
 	intel_dp_link_down(intel_dp);
+
+	intel_dp->dpms_mode = DRM_MODE_DPMS_OFF;
 }
 
-static void intel_dp_commit(struct drm_encoder *encoder)
+static void intel_enable_dp(struct intel_encoder *encoder)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
 
 	ironlake_edp_panel_vdd_on(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
-	intel_dp_start_link_train(intel_dp);
-	ironlake_edp_panel_on(intel_dp);
-	ironlake_edp_panel_vdd_off(intel_dp, true);
-	intel_dp_complete_link_train(intel_dp);
+	if (!(dp_reg & DP_PORT_EN)) {
+		intel_dp_start_link_train(intel_dp);
+		ironlake_edp_panel_on(intel_dp);
+		ironlake_edp_panel_vdd_off(intel_dp, true);
+		intel_dp_complete_link_train(intel_dp);
+	} else
+		ironlake_edp_panel_vdd_off(intel_dp, false);
 	ironlake_edp_backlight_on(intel_dp);
 
 	intel_dp->dpms_mode = DRM_MODE_DPMS_ON;
-
-	if (HAS_PCH_CPT(dev))
-		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
 }
 
 static void
-intel_dp_dpms(struct drm_encoder *encoder, int mode)
+intel_dp_dpms(struct drm_connector *connector, int mode)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+
+	/* DP supports only 2 dpms states. */
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
+	if (mode == connector->dpms)
+		return;
+
+	connector->dpms = mode;
+
+	/* Only need to change hw state when actually enabled */
+	if (!intel_dp->base.base.crtc) {
+		intel_dp->base.connectors_active = false;
+		return;
+	}
 
 	if (mode != DRM_MODE_DPMS_ON) {
-		/* Switching the panel off requires vdd. */
-		ironlake_edp_panel_vdd_on(intel_dp);
-		ironlake_edp_backlight_off(intel_dp);
-		intel_dp_sink_dpms(intel_dp, mode);
-		ironlake_edp_panel_off(intel_dp);
-		intel_dp_link_down(intel_dp);
+		intel_encoder_dpms(&intel_dp->base, mode);
+		WARN_ON(intel_dp->dpms_mode != DRM_MODE_DPMS_OFF);
 
 		if (is_cpu_edp(intel_dp))
-			ironlake_edp_pll_off(encoder);
+			ironlake_edp_pll_off(&intel_dp->base.base);
 	} else {
 		if (is_cpu_edp(intel_dp))
-			ironlake_edp_pll_on(encoder);
+			ironlake_edp_pll_on(&intel_dp->base.base);
 
-		ironlake_edp_panel_vdd_on(intel_dp);
-		intel_dp_sink_dpms(intel_dp, mode);
-		if (!(dp_reg & DP_PORT_EN)) {
-			intel_dp_start_link_train(intel_dp);
-			ironlake_edp_panel_on(intel_dp);
-			ironlake_edp_panel_vdd_off(intel_dp, true);
-			intel_dp_complete_link_train(intel_dp);
-		} else
-			ironlake_edp_panel_vdd_off(intel_dp, false);
-		ironlake_edp_backlight_on(intel_dp);
+		intel_encoder_dpms(&intel_dp->base, mode);
+		WARN_ON(intel_dp->dpms_mode != DRM_MODE_DPMS_ON);
 	}
-	intel_dp->dpms_mode = mode;
 }
 
 /*
@@ -2347,15 +2348,15 @@ static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 }
 
 static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
-	.dpms = intel_dp_dpms,
 	.mode_fixup = intel_dp_mode_fixup,
-	.prepare = intel_dp_prepare,
+	.prepare = intel_encoder_noop,
 	.mode_set = intel_dp_mode_set,
-	.commit = intel_dp_commit,
+	.commit = intel_encoder_noop,
+	.disable = intel_encoder_disable,
 };
 
 static const struct drm_connector_funcs intel_dp_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = intel_dp_dpms,
 	.detect = intel_dp_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = intel_dp_set_property,
@@ -2486,6 +2487,9 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	drm_sysfs_connector_add(connector);
 
+	intel_encoder->enable = intel_enable_dp;
+	intel_encoder->disable = intel_disable_dp;
+
 	/* Set up the DDC bus. */
 	switch (port) {
 	case PORT_A:
-- 
1.7.11.2



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux