As part of moving the modesetting code out of drm_fb_helper and into
drm_client, the drm_fb_helper_funcs->initial_config callback needs to go.
Replace it with a drm_driver->initial_client_display callback that can
work for all in-kernel clients.
TODO:
- Add a patch that moves the function out of intel_fbdev.c since it's not
fbdev specific anymore.
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
drivers/gpu/drm/drm_fb_helper.c | 19 +++++--
drivers/gpu/drm/i915/i915_drv.c | 1 +
drivers/gpu/drm/i915/intel_drv.h | 11 ++++
drivers/gpu/drm/i915/intel_fbdev.c | 113 ++++++++++++++++++-------------------
include/drm/drm_drv.h | 21 +++++++
5 files changed, 104 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index b992f59dad30..5407bf6dc8c0 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2103,6 +2103,20 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
/* prevent concurrent modification of connector_count by hotplug */
lockdep_assert_held(&fb_helper->lock);
+ mutex_lock(&dev->mode_config.mutex);
+ if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
+ DRM_DEBUG_KMS("No connectors reported connected with modes\n");
+
+ if (dev->driver->initial_client_display) {
+ display = dev->driver->initial_client_display(dev, width, height);
+ if (display) {
+ drm_client_display_free(fb_helper->display);
+ fb_helper->display = display;
+ mutex_unlock(&dev->mode_config.mutex);
+ return;
+ }
+ }
+
crtcs = kcalloc(fb_helper->connector_count,
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
modes = kcalloc(fb_helper->connector_count,
@@ -2120,9 +2134,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
if (IS_ERR(display))
goto out;
- mutex_lock(&fb_helper->dev->mode_config.mutex);
- if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
- DRM_DEBUG_KMS("No connectors reported connected with modes\n");
drm_enable_connectors(fb_helper, enabled);
if (!(fb_helper->funcs->initial_config &&
@@ -2144,7 +2155,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
}
- mutex_unlock(&fb_helper->dev->mode_config.mutex);
/* need to set the modesets up here for use later */
/* fill out the connector<->crtc mappings into the modesets */
@@ -2182,6 +2192,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
drm_client_display_free(fb_helper->display);
fb_helper->display = display;
out:
+ mutex_unlock(&dev->mode_config.mutex);
kfree(crtcs);
kfree(modes);
kfree(offsets);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 07c07d55398b..b746c0cbaa4b 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -2857,6 +2857,7 @@ static struct drm_driver driver = {
.dumb_create = i915_gem_dumb_create,
.dumb_map_offset = i915_gem_mmap_gtt,
+ .initial_client_display = i915_initial_client_display,
.ioctls = i915_ioctls,
.num_ioctls = ARRAY_SIZE(i915_ioctls),
.fops = &i915_driver_fops,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d4368589b355..f77f510617c5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1720,6 +1720,9 @@ extern void intel_fbdev_fini(struct drm_i915_private *dev_priv);
extern void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous);
extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
extern void intel_fbdev_restore_mode(struct drm_device *dev);
+struct drm_client_display *
+i915_initial_client_display(struct drm_device *dev, unsigned int width,
+ unsigned int height);
#else
static inline int intel_fbdev_init(struct drm_device *dev)
{
@@ -1749,6 +1752,14 @@ static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
static inline void intel_fbdev_restore_mode(struct drm_device *dev)
{
}
+
+static inline struct drm_client_display *
+i915_initial_client_display(struct drm_device *dev, unsigned int width,
+ unsigned int height)
+{
+ return NULL;
+}
+
#endif
/* intel_fbc.c */
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index a4ab8575a72e..b7f44c9475a8 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -38,6 +38,7 @@
#include <linux/vga_switcheroo.h>
#include <drm/drmP.h>
+#include <drm/drm_client.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include "intel_drv.h"
@@ -287,18 +288,6 @@ static int intelfb_create(struct drm_fb_helper *helper,
return ret;
}
-static struct drm_fb_helper_crtc *
-intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
-{
- int i;
-
- for (i = 0; i < fb_helper->crtc_count; i++)
- if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
- return &fb_helper->crtc_info[i];
-
- return NULL;
-}
-
/*
* Try to read the BIOS display configuration and use it for the initial
* fb configuration.
@@ -326,44 +315,48 @@ intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
* is in VGA mode we need to recalculate watermarks and set a new high-res
* framebuffer anyway.
*/
-static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
- struct drm_fb_helper_crtc **crtcs,
- struct drm_display_mode **modes,
- struct drm_fb_offset *offsets,
- bool *enabled, int width, int height)
+struct drm_client_display *
+i915_initial_client_display(struct drm_device *dev, unsigned int width,
+ unsigned int height)
{
- struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
+ struct drm_i915_private *dev_priv = to_i915(dev);
unsigned long conn_configured, conn_seq, mask;
- unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
- int i, j;
- bool *save_enabled;
- bool fallback = true, ret = true;
+ bool fallback = true, *enabled = NULL;
+ struct drm_client_display *display;
+ struct drm_connector **connectors;
+ int i, connector_count;
+ unsigned int count;
int num_connectors_enabled = 0;
int num_connectors_detected = 0;
struct drm_modeset_acquire_ctx ctx;
- save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
- if (!save_enabled)
- return false;
+ display = drm_client_display_create(dev);
+ if (IS_ERR(display))
+ return NULL;
drm_modeset_acquire_init(&ctx, 0);
- while (drm_modeset_lock_all_ctx(fb_helper->dev, &ctx) != 0)
+ while (drm_modeset_lock_all_ctx(dev, &ctx) != 0)
drm_modeset_backoff(&ctx);
- memcpy(save_enabled, enabled, count);
+ connector_count = drm_connector_get_all(dev, &connectors);
+ if (connector_count < 1)
+ goto bail;
+
+ enabled = drm_connector_get_enabled_status(connectors, connector_count);
+ if (!enabled)
+ goto bail;
+
+ count = min(connector_count, BITS_PER_LONG);
mask = GENMASK(count - 1, 0);
conn_configured = 0;
retry:
conn_seq = conn_configured;
for (i = 0; i < count; i++) {
- struct drm_fb_helper_connector *fb_conn;
- struct drm_connector *connector;
+ struct drm_connector *connector = connectors[i];
+ struct drm_display_mode *mode;
+ struct drm_mode_set *modeset;
struct drm_encoder *encoder;
- struct drm_fb_helper_crtc *new_crtc;
-
- fb_conn = fb_helper->connector_info[i];
- connector = fb_conn->connector;
if (conn_configured & BIT(i))
continue;
@@ -402,16 +395,13 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
num_connectors_enabled++;
- new_crtc = intel_fb_helper_crtc(fb_helper,
- connector->state->crtc);
-
/*
* Make sure we're not trying to drive multiple connectors
* with a single CRTC, since our cloning support may not
* match the BIOS.
*/
- for (j = 0; j < count; j++) {
- if (crtcs[j] == new_crtc) {
+ drm_client_display_for_each_modeset(modeset, display) {
+ if (modeset->connectors[0] == connector) {
DRM_DEBUG_KMS("fallback: cloned configuration\n");
goto bail;
}
@@ -421,28 +411,26 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
connector->name);
/* go for command line mode first */
- modes[i] = drm_connector_pick_cmdline_mode(connector);
+ mode = drm_connector_pick_cmdline_mode(connector);
/* try for preferred next */
- if (!modes[i]) {
+ if (!mode) {
DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
connector->name, connector->has_tile);
- modes[i] = drm_connector_has_preferred_mode(connector,
- width,
- height);
+ mode = drm_connector_has_preferred_mode(connector,
+ width, height);
}
/* No preferred mode marked by the EDID? Are there any modes? */
- if (!modes[i] && !list_empty(&connector->modes)) {
+ if (!mode && !list_empty(&connector->modes)) {
DRM_DEBUG_KMS("using first mode listed on connector %s\n",
connector->name);
- modes[i] = list_first_entry(&connector->modes,
- struct drm_display_mode,
- head);
+ mode = list_first_entry(&connector->modes,
+ struct drm_display_mode, head);
}
/* last resort: use current mode */
- if (!modes[i]) {
+ if (!mode) {
/*
* IMPORTANT: We want to use the adjusted mode (i.e.
* after the panel fitter upscaling) as the initial
@@ -458,16 +446,26 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
*/
DRM_DEBUG_KMS("looking for current mode on connector %s\n",
connector->name);
- modes[i] = &connector->state->crtc->mode;
+ mode = &connector->state->crtc->mode;
}
- crtcs[i] = new_crtc;
+
+ modeset = drm_client_display_find_modeset(display, connector->state->crtc);
+ if (WARN_ON(!modeset))
+ goto bail;
+
+ modeset->mode = drm_mode_duplicate(dev, mode);
+ drm_connector_get(connector);
+ modeset->connectors[0] = connector;
+ modeset->num_connectors = 1;
+ modeset->x = 0;
+ modeset->y = 0;
DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
connector->name,
connector->state->crtc->base.id,
connector->state->crtc->name,
- modes[i]->hdisplay, modes[i]->vdisplay,
- modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
+ mode->hdisplay, mode->vdisplay,
+ mode->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
fallback = false;
conn_configured |= BIT(i);
@@ -492,19 +490,20 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
if (fallback) {
bail:
DRM_DEBUG_KMS("Not using firmware configuration\n");
- memcpy(enabled, save_enabled, count);
- ret = false;
+ drm_client_display_free(display);
+ display = NULL;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
- kfree(save_enabled);
- return ret;
+ drm_connector_put_all(connectors, connector_count);
+ kfree(enabled);
+
+ return display;
}
static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
- .initial_config = intel_fb_initial_config,
.fb_probe = intelfb_create,
};
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index 7e545f5f94d3..13356e6fd40c 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -32,6 +32,7 @@
#include <drm/drm_device.h>
+struct drm_client_display;
struct drm_file;
struct drm_gem_object;
struct drm_master;
@@ -553,6 +554,26 @@ struct drm_driver {
struct drm_device *dev,
uint32_t handle);
+ /**
+ * @initial_client_config:
+ *
+ * Driver callback to setup an initial fbdev display configuration.
+ * Drivers can use this callback to tell the fbdev emulation what the
+ * preferred initial configuration is. This is useful to implement
+ * smooth booting where the fbdev (and subsequently all userspace) never
+ * changes the mode, but always inherits the existing configuration.
+ *
+ * This callback is optional.
+ *
+ * RETURNS:
+ *
+ * The driver should return true if a suitable initial configuration has
+ * been filled out and false when the fbdev helper should fall back to
+ * the default probing logic.
+ */
+ struct drm_client_display *(*initial_client_display)(struct drm_device *dev,
+ unsigned int width, unsigned int height);
+
/**
* @gem_vm_ops: Driver private ops for this object
*/
--
2.15.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
