Re: [PATCH 2/2] drm/i915/psr: Remove open-coded PSR AUX transactions for SKL+

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2018-03-12 at 20:46 -0700, Dhinakaran Pandiyan wrote:
> HSW and BDW have SRD_AUX_{CTL, STATUS} registers that the driver
> needs to
> setup for the HW to use whenever exiting PSR. SKL+ hardware use
> hardcoded
> values for the same and do not need any registers to be setup. So,
> use
> drm_dp_dpcd_writeb() for a one-time write during PSR enable and setup
> the
> PSR aux registers on HSW and BDW for later use by HW.
> 
> We also end up writing to reserved bits in SRD_AUX_CTL by reusing
> intel_dp->get_aux_send_ctl() for HSW and BDW, fix this.
> 
> Since the AUX register setup is source side programming, move the
> call
> to enable_source() from enable_sink().
> 
> Cc: José Roberto de Souza <jose.souza@xxxxxxxxx>

Reviewed-by: Jose Roberto de Souza <jose.souza@xxxxxxxxx>

> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h  |  6 +++++
>  drivers/gpu/drm/i915/intel_psr.c | 55 ++++++++++++++++------------
> ------------
>  2 files changed, 28 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index abdc513a9edd..23c0f9bdf591 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4151,6 +4151,12 @@ enum {
>  #define   EDP_PSR_IDLE_FRAME_SHIFT		0
>  
>  #define EDP_PSR_AUX_CTL				_MMIO(dev_pri
> v->psr_mmio_base + 0x10)
> +#define   EDP_PSR_AUX_CTL_TIME_OUT_MASK		(3 << 26)
> +#define   EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK	(0x1f << 20)
> +#define   EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK	(0xf << 16)
> +#define   EDP_PSR_AUX_CTL_ERROR_INTERRUPT	(1 << 11)
> +#define   EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK	(0x7ff)
> +
>  #define EDP_PSR_AUX_DATA(i)			_MMIO(dev_priv-
> >psr_mmio_base + 0x14 + (i) * 4) /* 5 registers */
>  
>  #define EDP_PSR_STATUS				_MMIO(dev_priv
> ->psr_mmio_base + 0x40)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index 86d6c19c9ae6..293a987a1bfd 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -228,31 +228,12 @@ static void vlv_psr_enable_sink(struct intel_dp
> *intel_dp)
>  			   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
>  }
>  
> -static i915_reg_t psr_aux_ctl_reg(struct drm_i915_private *dev_priv,
> -				       enum port port)
> -{
> -	if (INTEL_GEN(dev_priv) >= 9)
> -		return DP_AUX_CH_CTL(port);
> -	else
> -		return EDP_PSR_AUX_CTL;
> -}
> -
> -static i915_reg_t psr_aux_data_reg(struct drm_i915_private
> *dev_priv,
> -					enum port port, int index)
> -{
> -	if (INTEL_GEN(dev_priv) >= 9)
> -		return DP_AUX_CH_DATA(port, index);
> -	else
> -		return EDP_PSR_AUX_DATA(index);
> -}
> -
>  static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
>  {
>  	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> -	struct drm_device *dev = dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	uint32_t aux_clock_divider;
> -	i915_reg_t aux_ctl_reg;
> +	struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> +	u32 aux_clock_divider, aux_ctl;
> +	int i;
>  	static const uint8_t aux_msg[] = {
>  		[0] = DP_AUX_NATIVE_WRITE << 4,
>  		[1] = DP_SET_POWER >> 8,
> @@ -260,23 +241,25 @@ static void hsw_psr_setup_aux(struct intel_dp
> *intel_dp)
>  		[3] = 1 - 1,
>  		[4] = DP_SET_POWER_D0,
>  	};
> -	enum port port = dig_port->base.port;
> -	u32 aux_ctl;
> -	int i;
> +	u32 psr_aux_mask = EDP_PSR_AUX_CTL_TIME_OUT_MASK |
> +			   EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK |
> +			   EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK |
> +			   EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK;
>  
>  	BUILD_BUG_ON(sizeof(aux_msg) > 20);
> -
> -	aux_clock_divider = intel_dp-
> >get_aux_clock_divider(intel_dp, 0);
> -	aux_ctl_reg = psr_aux_ctl_reg(dev_priv, port);
> -
> -	/* Setup AUX registers */
>  	for (i = 0; i < sizeof(aux_msg); i += 4)
> -		I915_WRITE(psr_aux_data_reg(dev_priv, port, i >> 2),
> +		I915_WRITE(EDP_PSR_AUX_DATA(i >> 2),
>  			   intel_dp_pack_aux(&aux_msg[i],
> sizeof(aux_msg) - i));
>  
> +	aux_clock_divider = intel_dp-
> >get_aux_clock_divider(intel_dp, 0);
> +
> +	/* Start with bits set for DDI_AUX_CTL register */
>  	aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, 0,
> sizeof(aux_msg),
>  					     aux_clock_divider);
> -	I915_WRITE(aux_ctl_reg, aux_ctl);
> +
> +	/* Select only valid bits for SRD_AUX_CTL */
> +	aux_ctl &= psr_aux_mask;
> +	I915_WRITE(EDP_PSR_AUX_CTL, aux_ctl);
>  }
>  
>  static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
> @@ -303,7 +286,7 @@ static void hsw_psr_enable_sink(struct intel_dp
> *intel_dp)
>  		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
>  				   DP_PSR_ENABLE);
>  
> -	hsw_psr_setup_aux(intel_dp);
> +	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
>  }
>  
>  static void vlv_psr_enable_source(struct intel_dp *intel_dp,
> @@ -599,6 +582,12 @@ static void hsw_psr_enable_source(struct
> intel_dp *intel_dp,
>  
>  	psr_aux_io_power_get(intel_dp);
>  
> +	/* Only HSW and BDW have PSR AUX registers that need to be
> setup. SKL+
> +	 * use hardcoded values PSR AUX transactions
> +	 */
> +	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> +		hsw_psr_setup_aux(intel_dp);
> +
>  	if (dev_priv->psr.psr2_support) {
>  		chicken = PSR2_VSC_ENABLE_PROG_HEADER;
>  		if (dev_priv->psr.y_cord_support)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux