From: Johnson Lin <johnson.lin@xxxxxxxxx>
Some panels support limited range output (16-235) compared
to full range RGB values (0-255). Also userspace can control
the RGB range using "Broadcast RGB" property. Currently the
code to handle full range to limited range is broken. This
patch fixes the same by properly scaling down all the full
range co-efficients with limited range scaling factor.
v2: Fixed Ville's review comments.
v3: Changed input to const and used correct data types as
suggested by Ville
v4: Fixed some missing data type corrections.
Signed-off-by: Johnson Lin <johnson.lin@xxxxxxxxx>
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_color.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index 333a23b..0b505d4 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -84,26 +84,25 @@ static bool crtc_state_is_legacy_gamma(struct drm_crtc_state *state)
/*
* When using limited range, multiply the matrix given by userspace by
- * the matrix that we would use for the limited range. We do the
- * multiplication in U2.30 format.
+ * the matrix that we would use for the limited range.
*/
-static void ctm_mult_by_limited(uint64_t *result, int64_t *input)
+static void ctm_mult_by_limited(u64 *result, const u64 *input)
{
int i;
- for (i = 0; i < 9; i++)
- result[i] = 0;
+ for (i = 0; i < 9; i++) {
+ u64 user_coeff = input[i];
+ u32 limited_coeff = CTM_COEFF_LIMITED_RANGE;
+ u32 abs_coeff = clamp_val(CTM_COEFF_ABS(user_coeff), 0,
+ CTM_COEFF_4_0 - 1) >> 2;
- for (i = 0; i < 3; i++) {
- int64_t user_coeff = input[i * 3 + i];
- uint64_t limited_coeff = CTM_COEFF_LIMITED_RANGE >> 2;
- uint64_t abs_coeff = clamp_val(CTM_COEFF_ABS(user_coeff),
- 0,
- CTM_COEFF_4_0 - 1) >> 2;
-
- result[i * 3 + i] = (limited_coeff * abs_coeff) >> 27;
- if (CTM_COEFF_NEGATIVE(user_coeff))
- result[i * 3 + i] |= CTM_COEFF_SIGN;
+ /*
+ * By scaling every co-efficient with limited range (16-235)
+ * vs full range (0-255) the final o/p will be scaled down to
+ * fit in the limited range supported by the panel.
+ */
+ result[i] = mul_u32_u32(limited_coeff, abs_coeff) >> 30;
+ result[i] |= user_coeff & CTM_COEFF_SIGN;
}
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
