[PATCH 10/27] drm/i915/icl: Enhanced execution list support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thomas Daniel <thomas.daniel@xxxxxxxxx>

Supports two-element submission using the new enhanced execlist mechanism

v2: Rebase.
v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio).
v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio)

Signed-off-by: Thomas Daniel <thomas.daniel@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_lrc.c | 21 ++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_lrc.h |  3 +++
 2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index de41ad2d5fbc..3c6f587fa903 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -430,9 +430,18 @@ static inline void elsp_write(u64 desc, u32 __iomem *elsp)
 
 static void execlists_submit_ports(struct intel_engine_cs *engine)
 {
+	struct drm_i915_private *dev_priv = engine->i915;
 	struct execlist_port *port = engine->execlists.port;
+	u32 __iomem *elsq =
+		engine->i915->regs + i915_mmio_reg_offset(RING_ELSQ(engine));
 	unsigned int n;
 
+	/*
+	 * Gen11+ note: the submit queue is not cleared after being submitted
+	 * to the HW so we need to make sure we always clean it up. This is
+	 * currently ensured by the fact that we always write the same number
+	 * of elsq entries, keep this in mind before changing the loop below.
+	 */
 	for (n = execlists_num_ports(&engine->execlists); n--; ) {
 		struct drm_i915_gem_request *rq;
 		unsigned int count;
@@ -456,8 +465,18 @@ static void execlists_submit_ports(struct intel_engine_cs *engine)
 			desc = 0;
 		}
 
-		elsp_write(desc, engine->execlists.elsp);
+		if (INTEL_GEN(engine->i915) >= 11) {
+			writel(lower_32_bits(desc), elsq + n * 2);
+			writel(upper_32_bits(desc), elsq + n * 2 + 1);
+		} else {
+			elsp_write(desc, engine->execlists.elsp);
+		}
 	}
+
+	/* for gen11+ we need to manually load the submit queue */
+	if (INTEL_GEN(engine->i915) >= 11)
+		I915_WRITE_FW(RING_ELCR(engine), ELCR_LOAD);
+
 	execlists_clear_active(&engine->execlists, EXECLISTS_ACTIVE_HWACK);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_lrc.h b/drivers/gpu/drm/i915/intel_lrc.h
index 6d4f9b995a11..cb00e1dd6ed2 100644
--- a/drivers/gpu/drm/i915/intel_lrc.h
+++ b/drivers/gpu/drm/i915/intel_lrc.h
@@ -38,6 +38,9 @@
 #define	  CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT	(1 << 0)
 #define   CTX_CTRL_RS_CTX_ENABLE                (1 << 1)
 #define RING_CONTEXT_STATUS_BUF_BASE(engine)	_MMIO((engine)->mmio_base + 0x370)
+#define RING_ELSQ(engine)			_MMIO((engine)->mmio_base + 0x510)
+#define RING_ELCR(engine)			_MMIO((engine)->mmio_base + 0x550)
+#define	  ELCR_LOAD				(1 << 0)
 #define RING_CONTEXT_STATUS_BUF_LO(engine, i)	_MMIO((engine)->mmio_base + 0x370 + (i) * 8)
 #define RING_CONTEXT_STATUS_BUF_HI(engine, i)	_MMIO((engine)->mmio_base + 0x370 + (i) * 8 + 4)
 #define RING_CONTEXT_STATUS_PTR(engine)		_MMIO((engine)->mmio_base + 0x3a0)
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux