Very ugly hack, In file ---> intel_display.c function --- > ironlake_crtc_mode_set temp = I915_READ(_TRANSACONF); I915_WRITE(_TRANSACONF, temp & ~(7<<21)); I915_WRITE( 0x60028, 0x00000000); //VSYNCSHIFT_A? Vertical Sync Shift Register This register needs to be 0x00000000 for progressive mode I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); In file ---> i915_reg.h #define PIPECONF_INTERLACE_W_FIELD_INDICATION (7 << 21) // ( 6 << 21) Not sure why the PIPECONF MASK is 110 and not 111, from intel pdf 000b Progressive Fetch / Progressive display / 001b PF-ID Progressive Fetch / Interlaced display (HDMI) Requires panel fitting to be enabled Next will be to solve the RGB problem i have. From: paulo_louro at msn.com To: intel-gfx at lists.freedesktop.org Date: Tue, 24 Jan 2012 20:38:57 +0000 Subject: Re: [PROBLEM FOUND] Problem No HDMI when AV/TV in standby mode Hello all, I think i have found why there is a problem with my Onkyo AV when the TV/AV are in standby mode. I run the following test. Boot PC with AV/TV in standby and dump intel registers to a file TEST1Boot PC with AV/TV on and dump intel register to file TEST2Using the diff to find the difference between both files i found the following: root at SERVER:~# diff test1 test214c14< PIPEACONF: 0xc0200000 (enabled, active, 8bpc)---> PIPEACONF: 0xc0000000 (enabled, active, 8bpc)21c21< VSYNCSHIFT_A: 0x0000038c---> VSYNCSHIFT_A: 0x00000000125c125< TRANSACONF: 0xc0600000 (enable, active)---> TRANSACONF: 0xc0000000 (enable, active) So register PIPEACONF, VSYNCSHIFT_A and TRANSACONF are different. By checking intel documentation i found that this registers are responsibly for setting up the progressive/interleave mode. As so im thinking that this registers are not being reinitialize or cleaned. Is this possible? Since im up for one more test i used intel_reg_read/write to modified the registers and correct the values, to my surprise after writing to all the register the AV shows my desktop correctly. My other question is if they need to be reinitialized where in the code shall this be done? I'm up for writing a small patch to fix this issue, just need some one to point me on the right direction. Thanks--Paulo Louro _______________________________________________ Intel-gfx mailing list Intel-gfx at lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20120124/94ad1005/attachment-0001.htm>
