On Wed, Jan 18, 2012 at 06:39:40PM -0200, Paulo Zanoni wrote: > Hi > > 2012/1/18 Peter Ross <pross at xvid.org>: > > This patch set enables enables interlaced mode output on > > generation 3 and above chipsets. > > I just tested that on HDMI. > > The "interlace_allowed=1" patch seems fine: it made xrandr list more > modes. But I believe patch 1 is still not correct. I tested that and > instead of getting a 1920x1080 I got a 1920x1078 mode: vtotal, vblank > and vsync were wrong. If you look at the patch, you'll see that the > code has some "something -= 1" statements. I believe they could be > wrong. > > So I removed these lines and tested again... Now the mode is actually > 1920x1080, but my monitor's OSD displays it as "1080p". So I also > tested my TV and it reported "1080p at 25hz" too. > > I guess we're still missing something... I'll try to debug. To clarify, on which machines have you tried this? In particular, can you try this on an Ironlake? -Daniel -- Daniel Vetter Mail: daniel at ffwll.ch Mobile: +41 (0)79 365 57 48
