In the past the magic reg_a + (reg_b - reg_a) * port
was enough because every new register that was appearing
on new platforms was respecting the same gap.
However on more recent platforms we start seeing many
registers that doesn't respect the gap. So picking from
a list of registers seems to be the more general approach
that covers all cases.
So let's make MMIO_PORT use _PICK directly so we don't
need to create MMIO_PORT3 MMIO_PORT5 MMIO_PORT6 or
whatever number of different ports with different registers
that doesn't respect the gap.
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 57 +++++++++++++++++++++++++++++++++--------
1 file changed, 46 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b6d69e2..9a57a17 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -57,9 +57,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define _TRANS(tran, a, b) ((a) + (tran)*((b)-(a)))
#define _MMIO_TRANS(tran, a, b) _MMIO(_TRANS(tran, a, b))
#define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
-#define _MMIO_PORT(port, a, b) _MMIO(_PORT(port, a, b))
+#define _MMIO_PORT(port, ...) _MMIO(_PICK(port, __VA_ARGS__))
#define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
-#define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
#define _PHY3(phy, ...) _PICK(phy, __VA_ARGS__)
#define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
@@ -1576,7 +1575,8 @@ enum skl_disp_power_wells {
#define BXT_PHY_LANE_POWERDOWN_ACK (1 << 9)
#define BXT_PHY_LANE_ENABLED (1 << 8)
#define BXT_PHY_CTL(port) _MMIO_PORT(port, _BXT_PHY_CTL_DDI_A, \
- _BXT_PHY_CTL_DDI_B)
+ _BXT_PHY_CTL_DDI_B, \
+ _BXT_PHY_CTL_DDI_C)
#define _PHY_CTL_FAMILY_EDP 0x64C80
#define _PHY_CTL_FAMILY_DDI 0x64C90
@@ -1595,7 +1595,9 @@ enum skl_disp_power_wells {
#define PORT_PLL_REF_SEL (1 << 27)
#define PORT_PLL_POWER_ENABLE (1 << 26)
#define PORT_PLL_POWER_STATE (1 << 25)
-#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, _PORT_PLL_B)
+#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, \
+ _PORT_PLL_B, \
+ _PORT_PLL_C)
#define _PORT_PLL_EBB_0_A 0x162034
#define _PORT_PLL_EBB_0_B 0x6C034
@@ -2453,7 +2455,7 @@ enum skl_disp_power_wells {
#define _VLV_AUD_PORT_EN_B_DBG (VLV_DISPLAY_BASE + 0x62F20)
#define _VLV_AUD_PORT_EN_C_DBG (VLV_DISPLAY_BASE + 0x62F30)
#define _VLV_AUD_PORT_EN_D_DBG (VLV_DISPLAY_BASE + 0x62F34)
-#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT3((port) - PORT_B, \
+#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT((port) - PORT_B, \
_VLV_AUD_PORT_EN_B_DBG, \
_VLV_AUD_PORT_EN_C_DBG, \
_VLV_AUD_PORT_EN_D_DBG)
@@ -4821,7 +4823,10 @@ enum {
#define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320)
#define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324)
-#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
+#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, \
+ _DPB_AUX_CH_CTL, \
+ _DPC_AUX_CH_CTL, \
+ _DPD_AUX_CH_CTL)
#define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
@@ -7214,7 +7219,9 @@ enum {
#define _PCH_DPD_AUX_CH_DATA4 0xe4320
#define _PCH_DPD_AUX_CH_DATA5 0xe4324
-#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_CTL, _PCH_DPC_AUX_CH_CTL)
+#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, \
+ _PCH_DPB_AUX_CH_CTL, \
+ _PCH_DPC_AUX_CH_CTL)
#define PCH_DP_AUX_CH_DATA(port, i) _MMIO(_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_DATA1, _PCH_DPC_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
/* CPT */
@@ -7844,7 +7851,14 @@ enum {
/* DisplayPort Transport Control */
#define _DP_TP_CTL_A 0x64040
#define _DP_TP_CTL_B 0x64140
-#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B)
+#define _DP_TP_CTL_C 0x64240
+#define _DP_TP_CTL_D 0x64340
+#define _DP_TP_CTL_E 0x64440
+#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, \
+ _DP_TP_CTL_B, \
+ _DP_TP_CTL_C, \
+ _DP_TP_CTL_D, \
+ _DP_TP_CTL_E)
#define DP_TP_CTL_ENABLE (1<<31)
#define DP_TP_CTL_MODE_SST (0<<27)
#define DP_TP_CTL_MODE_MST (1<<27)
@@ -7862,7 +7876,14 @@ enum {
/* DisplayPort Transport Status */
#define _DP_TP_STATUS_A 0x64044
#define _DP_TP_STATUS_B 0x64144
-#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B)
+#define _DP_TP_STATUS_C 0x64244
+#define _DP_TP_STATUS_D 0x64344
+#define _DP_TP_STATUS_E 0x64444
+#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, \
+ _DP_TP_STATUS_B, \
+ _DP_TP_STATUS_C, \
+ _DP_TP_STATUS_D, \
+ _DP_TP_STATUS_E)
#define DP_TP_STATUS_IDLE_DONE (1<<25)
#define DP_TP_STATUS_ACT_SENT (1<<24)
#define DP_TP_STATUS_MODE_STATUS_MST (1<<23)
@@ -7874,7 +7895,14 @@ enum {
/* DDI Buffer Control */
#define _DDI_BUF_CTL_A 0x64000
#define _DDI_BUF_CTL_B 0x64100
-#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
+#define _DDI_BUF_CTL_C 0x64200
+#define _DDI_BUF_CTL_D 0x64300
+#define _DDI_BUF_CTL_E 0x64400
+#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, \
+ _DDI_BUF_CTL_B, \
+ _DDI_BUF_CTL_C, \
+ _DDI_BUF_CTL_D, \
+ _DDI_BUF_CTL_E)
#define DDI_BUF_CTL_ENABLE (1<<31)
#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
#define DDI_BUF_EMP_MASK (0xf<<24)
@@ -7973,7 +8001,14 @@ enum {
/* Port clock selection */
#define _PORT_CLK_SEL_A 0x46100
#define _PORT_CLK_SEL_B 0x46104
-#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B)
+#define _PORT_CLK_SEL_C 0x46108
+#define _PORT_CLK_SEL_D 0x4610C
+#define _PORT_CLK_SEL_E 0x46110
+#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, \
+ _PORT_CLK_SEL_B, \
+ _PORT_CLK_SEL_C, \
+ _PORT_CLK_SEL_D, \
+ _PORT_CLK_SEL_E)
#define PORT_CLK_SEL_LCPLL_2700 (0<<29)
#define PORT_CLK_SEL_LCPLL_1350 (1<<29)
#define PORT_CLK_SEL_LCPLL_810 (2<<29)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
