From: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> When retrieving the initial settings / mode from the hardware also retrieve the initial rotation config. Together with "drm/fb-helper: Make fbdev inherit the crtc's rotation" this will make the fbdev inherit the initial rotation. This is useful on e.g. some tablets which have their lcd panel mounted upside down, which before this commit would result in the kernel boot messages switching from being shown the right way up in efifb to being shown upside down as soon as a native kms driver loads. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> [hdegoede@xxxxxxxxxx: Split the intel_display bits out of Ville's "drm/fb-helper: Inherit rotation wip" patch] Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 30 +++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_drv.h | 1 + 2 files changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ed1f4f2..5c9f504 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2821,6 +2821,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, plane_state->crtc_w = fb->width; plane_state->crtc_h = fb->height; + plane_state->rotation = plane_config->rotation; + intel_state->base.src = drm_plane_state_src(plane_state); intel_state->base.dst = drm_plane_state_dest(plane_state); @@ -8733,6 +8735,9 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc, plane_config->tiling = I915_TILING_X; fb->modifier = I915_FORMAT_MOD_X_TILED; } + + if (val & DISPPLANE_ROTATE_180) + plane_config->rotation = DRM_ROTATE_180; } pixel_format = val & DISPPLANE_PIXFORMAT_MASK; @@ -9784,6 +9789,24 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, goto error; } + /* + * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr + * while i915 HW rotation is clockwise, thats why this swapping. + */ + switch (val & PLANE_CTL_ROTATE_MASK) { + case PLANE_CTL_ROTATE_0: + break; + case PLANE_CTL_ROTATE_90: + plane_config->rotation = DRM_ROTATE_270; + break; + case PLANE_CTL_ROTATE_180: + plane_config->rotation = DRM_ROTATE_180; + break; + case PLANE_CTL_ROTATE_270: + plane_config->rotation = DRM_ROTATE_90; + break; + } + base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000; plane_config->base = base; @@ -9872,6 +9895,9 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc, plane_config->tiling = I915_TILING_X; fb->modifier = I915_FORMAT_MOD_X_TILED; } + + if (val & DISPPLANE_ROTATE_180) + plane_config->rotation = DRM_ROTATE_180; } pixel_format = val & DISPPLANE_PIXFORMAT_MASK; @@ -16713,7 +16739,9 @@ int intel_modeset_init(struct drm_device *dev) drm_modeset_unlock_all(dev); for_each_intel_crtc(dev, crtc) { - struct intel_initial_plane_config plane_config = {}; + struct intel_initial_plane_config plane_config = { + .rotation = DRM_ROTATE_0 + }; if (!crtc->active) continue; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 344f238..63623dd 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -418,6 +418,7 @@ struct intel_initial_plane_config { unsigned int tiling; int size; u32 base; + uint8_t rotation; }; #define SKL_MIN_SRC_W 8 -- 2.9.3 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
