Re: [PATCH] drm/915/glk: Enable pooled EUs for Geminilake

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2017-02-28 at 06:25 +0000, Yang, Rong R wrote:
> We suggest GLK could disable pooled EUs for 2x6 configurations too.

This patch does that. I tried to say that in the commit message but now that I
re-read I see it doesn't really say it.

> As I understand, 2x6 a pool must consist of a complete subslice, 12EUs, right?

That's my understanding too.

Ander

> If so, only 64K SLM are valid, I am afraid it may affect some case's performance.
> 
> > -----Original Message-----
> > From: Conselvan De Oliveira, Ander
> > Sent: Friday, February 24, 2017 21:13
> > To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > Cc: Conselvan De Oliveira, Ander <ander.conselvan.de.oliveira@xxxxxxxxx>;
> > Arun Siluvery <arun.siluvery@xxxxxxxxx>; Kuoppala, Mika
> > <mika.kuoppala@xxxxxxxxx>; Ursulin, Tvrtko <tvrtko.ursulin@xxxxxxxxx>;
> > Yang, Rong R <rong.r.yang@xxxxxxxxx>
> > Subject: [PATCH] drm/915/glk: Enable pooled EUs for Geminilake
> > 
> > Geminilake also supports pooled EUs. Enable it.
> > 
> > It is unclear if the recommendation to disable it for 2x6 configurations from
> > commit e015dd69b2cf ("drm/i915/bxt: Add WaEnablePooledEuFor2x6")
> > should also apply to GLK, but the only userspace that uses this only cares
> > about the 3x6 configuration. See Beignet's commit 6901899ec90a
> > ("Runtime: set the sub slice according to kernel pooled EU configure.").
> > 
> > Cc: Arun Siluvery <arun.siluvery@xxxxxxxxx>
> > Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
> > Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
> > Cc: Yang Rong <rong.r.yang@xxxxxxxxx>
> > Signed-off-by: Ander Conselvan de Oliveira
> > <ander.conselvan.de.oliveira@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_device_info.c | 9 +++++----
> >  1 file changed, 5 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_device_info.c
> > b/drivers/gpu/drm/i915/intel_device_info.c
> > index 2e1fd85..198752d 100644
> > --- a/drivers/gpu/drm/i915/intel_device_info.c
> > +++ b/drivers/gpu/drm/i915/intel_device_info.c
> > @@ -195,8 +195,10 @@ static void gen9_sseu_info_init(struct
> > drm_i915_private *dev_priv)
> >  		IS_GEN9_LP(dev_priv) && sseu_subslice_total(sseu) > 1;
> >  	sseu->has_eu_pg = sseu->eu_per_subslice > 2;
> > 
> > -	if (IS_BROXTON(dev_priv)) {
> > +	if (IS_GEN9_LP(dev_priv)) {
> >  #define IS_SS_DISABLED(ss)	(!(sseu->subslice_mask & BIT(ss)))
> > +		info->has_pooled_eu = hweight8(sseu->subslice_mask) == 3;
> > +
> >  		/*
> >  		 * There is a HW issue in 2x6 fused down parts that requires
> >  		 * Pooled EU to be enabled as a WA. The pool configuration
> > @@ -204,9 +206,8 @@ static void gen9_sseu_info_init(struct
> > drm_i915_private *dev_priv)
> >  		 * doesn't affect if the device has all 3 subslices enabled.
> >  		 */
> >  		/* WaEnablePooledEuFor2x6:bxt */
> > -		info->has_pooled_eu = ((hweight8(sseu->subslice_mask) ==
> > 3) ||
> > -				       (hweight8(sseu->subslice_mask) == 2 &&
> > -					INTEL_REVID(dev_priv) <
> > BXT_REVID_C0));
> > +		info->has_pooled_eu |= (hweight8(sseu->subslice_mask) ==
> > 2 &&
> > +					IS_BXT_REVID(dev_priv, 0,
> > BXT_REVID_B_LAST));
> > 
> >  		sseu->min_eu_in_pool = 0;
> >  		if (info->has_pooled_eu) {
> > --
> > 2.9.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux