On Sat, 2016-11-05 at 21:40 +0200, Jani Nikula wrote:
> On Fri, 04 Nov 2016, "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@xxxxxxxxx> wrote:
> > On Fri, 2016-11-04 at 17:48 +0200, Jani Nikula wrote:
> >> On Wed, 26 Oct 2016, Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx> wrote:
> >> > Enabling DP audio stall fix is necessary to play audio over DP HBR2. So,
> >> > let's set this bit right before enabling the audio codec. Playing audio
> >> > without setting this bit results in pipe FIFO underruns.
> >> >
> >> > This workaround is applicable only for audio sample rates up to 96kHz. For
> >> > frequencies above 96kHz, this is insufficient and cdclk should be increased
> >> > to at least 432 MHz, just like BDW. Since, the audio driver does not
> >> > support sample rates > 48 kHz, we are safe with this fix for now.
> >>
> >> Do we still need this patch now that these two have been pushed?
> >>
> >> b30ce9e0552a drm/i915/dp: BDW cdclk fix for DP audio
> >> 9c7540241885 drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
> >>
> >> BR,
> >> Jani.
> >>
> >>
> >>
> >
> > No, we are good afaik. This patch would have helped us to make use of a
> > lower cdclk (337.5 MHz), with constraints on audio bit rate. Operating
> > at 432 MHz, like we do now, rules out the need for this patch.
>
> Hmm, what about 5.4 Gbps link with 1 or 2 lanes?
>
> BR,
> Jani.
>
Good point, I think it will depend on the audio sampling rate. But, I
have to figure out a way to play high sampling rate audio (> 96 KHz) and
test 5.4 Gbps with 1 or 2 lanes.
The other option is to play safe and apply this patch with even lesser
restrictions, say link rate >= 2.7 Gbps.
-DK
> >
> > -DK
> >
> >> >
> >> > v2: Inlined the code change within hsw_audio_codec_enable() (Jani)
> >> > Fixed the port clock typo
> >> > Added TODO comment
> >> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> >> > ---
> >> > drivers/gpu/drm/i915/i915_reg.h | 5 +++++
> >> > drivers/gpu/drm/i915/intel_audio.c | 30 +++++++++++++++++++++++++++++-
> >> > 2 files changed, 34 insertions(+), 1 deletion(-)
> >> >
> >> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> >> > index 00efaa1..76dac48 100644
> >> > --- a/drivers/gpu/drm/i915/i915_reg.h
> >> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> >> > @@ -6236,6 +6236,11 @@ enum {
> >> > #define SLICE_ECO_CHICKEN0 _MMIO(0x7308)
> >> > #define PIXEL_MASK_CAMMING_DISABLE (1 << 14)
> >> >
> >> > +#define _CHICKEN_TRANS_A 0x420C0
> >> > +#define _CHICKEN_TRANS_B 0x420C4
> >> > +#define CHICKEN_TRANS(tran) _MMIO_TRANS(tran, _CHICKEN_TRANS_A, _CHICKEN_TRANS_B)
> >> > +#define SPARE_13 (1<<13)
> >> > +
> >> > /* WaCatErrorRejectionIssue */
> >> > #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG _MMIO(0x9030)
> >> > #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11)
> >> > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> >> > index 7093cfb..894f11e 100644
> >> > --- a/drivers/gpu/drm/i915/intel_audio.c
> >> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> >> > @@ -283,6 +283,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> >> > {
> >> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> >> > struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> >> > + struct intel_crtc_state *crtc_config = intel_crtc->config;
> >> > + enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> >> > enum pipe pipe = intel_crtc->pipe;
> >> > uint32_t tmp;
> >> >
> >> > @@ -290,13 +292,21 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
> >> >
> >> > mutex_lock(&dev_priv->av_mutex);
> >> >
> >> > + /*Disable DP audio stall fix for HBR2*/
> >> > + if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> >> > + crtc_config->port_clock >= 540000) {
> >> > + tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> >> > + tmp &= ~SPARE_13;
> >> > + I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> >> > + }
> >> > +
> >> > /* Disable timestamps */
> >> > tmp = I915_READ(HSW_AUD_CFG(pipe));
> >> > tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> >> > tmp |= AUD_CONFIG_N_PROG_ENABLE;
> >> > tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> >> > tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> >> > - if (intel_crtc_has_dp_encoder(intel_crtc->config))
> >> > + if (intel_crtc_has_dp_encoder(crtc_config))
> >> > tmp |= AUD_CONFIG_N_VALUE_INDEX;
> >> > I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> >> >
> >> > @@ -315,6 +325,8 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> >> > {
> >> > struct drm_i915_private *dev_priv = to_i915(connector->dev);
> >> > struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
> >> > + struct intel_crtc_state *crtc_config = intel_crtc->config;
> >> > + enum transcoder cpu_transcoder = crtc_config->cpu_transcoder;
> >> > enum pipe pipe = intel_crtc->pipe;
> >> > enum port port = intel_encoder->port;
> >> > const uint8_t *eld = connector->eld;
> >> > @@ -326,6 +338,22 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> >> >
> >> > mutex_lock(&dev_priv->av_mutex);
> >> >
> >> > + /* Enable DP audio stall fix for HBR2
> >> > + *
> >> > + * TODO: This workaround is applicable only for audio sample rates up
> >> > + * to 96kHz. For frequencies above 96kHz, this is insufficient and
> >> > + * cdclk should be increased to at least 432 MHz, just like BDW. Since,
> >> > + * the audio driver does not support sample rates > 48 kHz, we are safe
> >> > + * with this fix for now.
> >> > + */
> >> > +
> >> > + if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config) &&
> >> > + crtc_config->port_clock >= 540000) {
> >> > + tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> >> > + tmp |= SPARE_13;
> >> > + I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> >> > + }
> >> > +
> >> > /* Enable audio presence detect, invalidate ELD */
> >> > tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> >> > tmp |= AUDIO_OUTPUT_ENABLE(pipe);
> >>
> >
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
