Just pure code movement, cleanup and polish will happen in later
patches.
v2: Don't forget all the ioctl! To extract those cleanly I decided to
put check_src_coords into drm_framebuffer.c (and give it a
drm_framebuffer_ prefix), since that just checks framebuffer
constraints.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
Documentation/gpu/drm-kms.rst | 12 +
drivers/gpu/drm/Makefile | 3 +-
drivers/gpu/drm/drm_crtc.c | 939 +-----------------------------------
drivers/gpu/drm/drm_crtc_internal.h | 38 +-
drivers/gpu/drm/drm_framebuffer.c | 26 +
drivers/gpu/drm/drm_plane.c | 937 +++++++++++++++++++++++++++++++++++
include/drm/drm_atomic.h | 154 ++++++
include/drm/drm_crtc.h | 583 +---------------------
include/drm/drm_plane.h | 470 ++++++++++++++++++
9 files changed, 1628 insertions(+), 1534 deletions(-)
create mode 100644 drivers/gpu/drm/drm_plane.c
create mode 100644 include/drm/drm_plane.h
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index f9a991bb87d4..33181be97151 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -110,6 +110,18 @@ Note that dumb objects may not be used for gpu acceleration, as has been
attempted on some ARM embedded platforms. Such drivers really must have
a hardware-specific ioctl to allocate suitable buffer objects.
+Plane Abstraction
+=================
+
+Plane Functions Reference
+-------------------------
+
+.. kernel-doc:: include/drm/drm_plane.h
+ :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane.c
+ :export:
+
Display Modes Function Reference
================================
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 439d89b25ae0..8eeb07a35798 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -14,7 +14,8 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_rect.o drm_vma_manager.o drm_flip_work.o \
drm_modeset_lock.o drm_atomic.o drm_bridge.o \
drm_framebuffer.o drm_connector.o drm_blend.o \
- drm_encoder.o drm_mode_object.o drm_property.o
+ drm_encoder.o drm_mode_object.o drm_property.o \
+ drm_plane.o
drm-$(CONFIG_COMPAT) += drm_ioc32.o
drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 0fad433f4d2d..513ab4729683 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -251,255 +251,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc)
}
EXPORT_SYMBOL(drm_crtc_cleanup);
-static unsigned int drm_num_planes(struct drm_device *dev)
-{
- unsigned int num = 0;
- struct drm_plane *tmp;
-
- drm_for_each_plane(tmp, dev) {
- num++;
- }
-
- return num;
-}
-
-/**
- * drm_universal_plane_init - Initialize a new universal plane object
- * @dev: DRM device
- * @plane: plane object to init
- * @possible_crtcs: bitmask of possible CRTCs
- * @funcs: callbacks for the new plane
- * @formats: array of supported formats (DRM_FORMAT\_\*)
- * @format_count: number of elements in @formats
- * @type: type of plane (overlay, primary, cursor)
- * @name: printf style format string for the plane name, or NULL for default name
- *
- * Initializes a plane object of type @type.
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats, unsigned int format_count,
- enum drm_plane_type type,
- const char *name, ...)
-{
- struct drm_mode_config *config = &dev->mode_config;
- int ret;
-
- ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
- if (ret)
- return ret;
-
- drm_modeset_lock_init(&plane->mutex);
-
- plane->base.properties = &plane->properties;
- plane->dev = dev;
- plane->funcs = funcs;
- plane->format_types = kmalloc_array(format_count, sizeof(uint32_t),
- GFP_KERNEL);
- if (!plane->format_types) {
- DRM_DEBUG_KMS("out of memory when allocating plane\n");
- drm_mode_object_unregister(dev, &plane->base);
- return -ENOMEM;
- }
-
- if (name) {
- va_list ap;
-
- va_start(ap, name);
- plane->name = kvasprintf(GFP_KERNEL, name, ap);
- va_end(ap);
- } else {
- plane->name = kasprintf(GFP_KERNEL, "plane-%d",
- drm_num_planes(dev));
- }
- if (!plane->name) {
- kfree(plane->format_types);
- drm_mode_object_unregister(dev, &plane->base);
- return -ENOMEM;
- }
-
- memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
- plane->format_count = format_count;
- plane->possible_crtcs = possible_crtcs;
- plane->type = type;
-
- list_add_tail(&plane->head, &config->plane_list);
- plane->index = config->num_total_plane++;
- if (plane->type == DRM_PLANE_TYPE_OVERLAY)
- config->num_overlay_plane++;
-
- drm_object_attach_property(&plane->base,
- config->plane_type_property,
- plane->type);
-
- if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
- drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
- drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
- drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
- drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
- drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
- drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
- drm_object_attach_property(&plane->base, config->prop_src_x, 0);
- drm_object_attach_property(&plane->base, config->prop_src_y, 0);
- drm_object_attach_property(&plane->base, config->prop_src_w, 0);
- drm_object_attach_property(&plane->base, config->prop_src_h, 0);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(drm_universal_plane_init);
-
-static int drm_plane_register_all(struct drm_device *dev)
-{
- struct drm_plane *plane;
- int ret = 0;
-
- drm_for_each_plane(plane, dev) {
- if (plane->funcs->late_register)
- ret = plane->funcs->late_register(plane);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static void drm_plane_unregister_all(struct drm_device *dev)
-{
- struct drm_plane *plane;
-
- drm_for_each_plane(plane, dev) {
- if (plane->funcs->early_unregister)
- plane->funcs->early_unregister(plane);
- }
-}
-
-/**
- * drm_plane_init - Initialize a legacy plane
- * @dev: DRM device
- * @plane: plane object to init
- * @possible_crtcs: bitmask of possible CRTCs
- * @funcs: callbacks for the new plane
- * @formats: array of supported formats (DRM_FORMAT\_\*)
- * @format_count: number of elements in @formats
- * @is_primary: plane type (primary vs overlay)
- *
- * Legacy API to initialize a DRM plane.
- *
- * New drivers should call drm_universal_plane_init() instead.
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats, unsigned int format_count,
- bool is_primary)
-{
- enum drm_plane_type type;
-
- type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
- return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
- formats, format_count, type, NULL);
-}
-EXPORT_SYMBOL(drm_plane_init);
-
-/**
- * drm_plane_cleanup - Clean up the core plane usage
- * @plane: plane to cleanup
- *
- * This function cleans up @plane and removes it from the DRM mode setting
- * core. Note that the function does *not* free the plane structure itself,
- * this is the responsibility of the caller.
- */
-void drm_plane_cleanup(struct drm_plane *plane)
-{
- struct drm_device *dev = plane->dev;
-
- drm_modeset_lock_all(dev);
- kfree(plane->format_types);
- drm_mode_object_unregister(dev, &plane->base);
-
- BUG_ON(list_empty(&plane->head));
-
- /* Note that the plane_list is considered to be static; should we
- * remove the drm_plane at runtime we would have to decrement all
- * the indices on the drm_plane after us in the plane_list.
- */
-
- list_del(&plane->head);
- dev->mode_config.num_total_plane--;
- if (plane->type == DRM_PLANE_TYPE_OVERLAY)
- dev->mode_config.num_overlay_plane--;
- drm_modeset_unlock_all(dev);
-
- WARN_ON(plane->state && !plane->funcs->atomic_destroy_state);
- if (plane->state && plane->funcs->atomic_destroy_state)
- plane->funcs->atomic_destroy_state(plane, plane->state);
-
- kfree(plane->name);
-
- memset(plane, 0, sizeof(*plane));
-}
-EXPORT_SYMBOL(drm_plane_cleanup);
-
-/**
- * drm_plane_from_index - find the registered plane at an index
- * @dev: DRM device
- * @idx: index of registered plane to find for
- *
- * Given a plane index, return the registered plane from DRM device's
- * list of planes with matching index.
- */
-struct drm_plane *
-drm_plane_from_index(struct drm_device *dev, int idx)
-{
- struct drm_plane *plane;
-
- drm_for_each_plane(plane, dev)
- if (idx == plane->index)
- return plane;
-
- return NULL;
-}
-EXPORT_SYMBOL(drm_plane_from_index);
-
-/**
- * drm_plane_force_disable - Forcibly disable a plane
- * @plane: plane to disable
- *
- * Forces the plane to be disabled.
- *
- * Used when the plane's current framebuffer is destroyed,
- * and when restoring fbdev mode.
- */
-void drm_plane_force_disable(struct drm_plane *plane)
-{
- int ret;
-
- if (!plane->fb)
- return;
-
- plane->old_fb = plane->fb;
- ret = plane->funcs->disable_plane(plane);
- if (ret) {
- DRM_ERROR("failed to disable plane with busy fb\n");
- plane->old_fb = NULL;
- return;
- }
- /* disconnect the plane from the fb and crtc: */
- drm_framebuffer_unreference(plane->old_fb);
- plane->old_fb = NULL;
- plane->fb = NULL;
- plane->crtc = NULL;
-}
-EXPORT_SYMBOL(drm_plane_force_disable);
-
int drm_modeset_register_all(struct drm_device *dev)
{
int ret;
@@ -850,343 +601,6 @@ int drm_mode_getcrtc(struct drm_device *dev,
}
/**
- * drm_mode_getplane_res - enumerate all plane resources
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * Construct a list of plane ids to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_getplane_res(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_mode_get_plane_res *plane_resp = data;
- struct drm_mode_config *config;
- struct drm_plane *plane;
- uint32_t __user *plane_ptr;
- int copied = 0;
- unsigned num_planes;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- config = &dev->mode_config;
-
- if (file_priv->universal_planes)
- num_planes = config->num_total_plane;
- else
- num_planes = config->num_overlay_plane;
-
- /*
- * This ioctl is called twice, once to determine how much space is
- * needed, and the 2nd time to fill it.
- */
- if (num_planes &&
- (plane_resp->count_planes >= num_planes)) {
- plane_ptr = (uint32_t __user *)(unsigned long)plane_resp->plane_id_ptr;
-
- /* Plane lists are invariant, no locking needed. */
- drm_for_each_plane(plane, dev) {
- /*
- * Unless userspace set the 'universal planes'
- * capability bit, only advertise overlays.
- */
- if (plane->type != DRM_PLANE_TYPE_OVERLAY &&
- !file_priv->universal_planes)
- continue;
-
- if (put_user(plane->base.id, plane_ptr + copied))
- return -EFAULT;
- copied++;
- }
- }
- plane_resp->count_planes = num_planes;
-
- return 0;
-}
-
-/**
- * drm_mode_getplane - get plane configuration
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * Construct a plane configuration structure to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_getplane(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_mode_get_plane *plane_resp = data;
- struct drm_plane *plane;
- uint32_t __user *format_ptr;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- plane = drm_plane_find(dev, plane_resp->plane_id);
- if (!plane)
- return -ENOENT;
-
- drm_modeset_lock(&plane->mutex, NULL);
- if (plane->crtc)
- plane_resp->crtc_id = plane->crtc->base.id;
- else
- plane_resp->crtc_id = 0;
-
- if (plane->fb)
- plane_resp->fb_id = plane->fb->base.id;
- else
- plane_resp->fb_id = 0;
- drm_modeset_unlock(&plane->mutex);
-
- plane_resp->plane_id = plane->base.id;
- plane_resp->possible_crtcs = plane->possible_crtcs;
- plane_resp->gamma_size = 0;
-
- /*
- * This ioctl is called twice, once to determine how much space is
- * needed, and the 2nd time to fill it.
- */
- if (plane->format_count &&
- (plane_resp->count_format_types >= plane->format_count)) {
- format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr;
- if (copy_to_user(format_ptr,
- plane->format_types,
- sizeof(uint32_t) * plane->format_count)) {
- return -EFAULT;
- }
- }
- plane_resp->count_format_types = plane->format_count;
-
- return 0;
-}
-
-/**
- * drm_plane_check_pixel_format - Check if the plane supports the pixel format
- * @plane: plane to check for format support
- * @format: the pixel format
- *
- * Returns:
- * Zero of @plane has @format in its list of supported pixel formats, -EINVAL
- * otherwise.
- */
-int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
-{
- unsigned int i;
-
- for (i = 0; i < plane->format_count; i++) {
- if (format == plane->format_types[i])
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int check_src_coords(uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- const struct drm_framebuffer *fb)
-{
- unsigned int fb_width, fb_height;
-
- fb_width = fb->width << 16;
- fb_height = fb->height << 16;
-
- /* Make sure source coordinates are inside the fb. */
- if (src_w > fb_width ||
- src_x > fb_width - src_w ||
- src_h > fb_height ||
- src_y > fb_height - src_h) {
- DRM_DEBUG_KMS("Invalid source coordinates "
- "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
- src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
- src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
- src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
- src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
- return -ENOSPC;
- }
-
- return 0;
-}
-
-/*
- * setplane_internal - setplane handler for internal callers
- *
- * Note that we assume an extra reference has already been taken on fb. If the
- * update fails, this reference will be dropped before return; if it succeeds,
- * the previous framebuffer (if any) will be unreferenced instead.
- *
- * src_{x,y,w,h} are provided in 16.16 fixed point format
- */
-static int __setplane_internal(struct drm_plane *plane,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int32_t crtc_x, int32_t crtc_y,
- uint32_t crtc_w, uint32_t crtc_h,
- /* src_{x,y,w,h} values are 16.16 fixed point */
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
-{
- int ret = 0;
-
- /* No fb means shut it down */
- if (!fb) {
- plane->old_fb = plane->fb;
- ret = plane->funcs->disable_plane(plane);
- if (!ret) {
- plane->crtc = NULL;
- plane->fb = NULL;
- } else {
- plane->old_fb = NULL;
- }
- goto out;
- }
-
- /* Check whether this plane is usable on this CRTC */
- if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
- DRM_DEBUG_KMS("Invalid crtc for plane\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Check whether this plane supports the fb pixel format. */
- ret = drm_plane_check_pixel_format(plane, fb->pixel_format);
- if (ret) {
- char *format_name = drm_get_format_name(fb->pixel_format);
- DRM_DEBUG_KMS("Invalid pixel format %s\n", format_name);
- kfree(format_name);
- goto out;
- }
-
- /* Give drivers some help against integer overflows */
- if (crtc_w > INT_MAX ||
- crtc_x > INT_MAX - (int32_t) crtc_w ||
- crtc_h > INT_MAX ||
- crtc_y > INT_MAX - (int32_t) crtc_h) {
- DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
- crtc_w, crtc_h, crtc_x, crtc_y);
- ret = -ERANGE;
- goto out;
- }
-
- ret = check_src_coords(src_x, src_y, src_w, src_h, fb);
- if (ret)
- goto out;
-
- plane->old_fb = plane->fb;
- ret = plane->funcs->update_plane(plane, crtc, fb,
- crtc_x, crtc_y, crtc_w, crtc_h,
- src_x, src_y, src_w, src_h);
- if (!ret) {
- plane->crtc = crtc;
- plane->fb = fb;
- fb = NULL;
- } else {
- plane->old_fb = NULL;
- }
-
-out:
- if (fb)
- drm_framebuffer_unreference(fb);
- if (plane->old_fb)
- drm_framebuffer_unreference(plane->old_fb);
- plane->old_fb = NULL;
-
- return ret;
-}
-
-static int setplane_internal(struct drm_plane *plane,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int32_t crtc_x, int32_t crtc_y,
- uint32_t crtc_w, uint32_t crtc_h,
- /* src_{x,y,w,h} values are 16.16 fixed point */
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
-{
- int ret;
-
- drm_modeset_lock_all(plane->dev);
- ret = __setplane_internal(plane, crtc, fb,
- crtc_x, crtc_y, crtc_w, crtc_h,
- src_x, src_y, src_w, src_h);
- drm_modeset_unlock_all(plane->dev);
-
- return ret;
-}
-
-/**
- * drm_mode_setplane - configure a plane's configuration
- * @dev: DRM device
- * @data: ioctl data*
- * @file_priv: DRM file info
- *
- * Set plane configuration, including placement, fb, scaling, and other factors.
- * Or pass a NULL fb to disable (planes may be disabled without providing a
- * valid crtc).
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_setplane(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_mode_set_plane *plane_req = data;
- struct drm_plane *plane;
- struct drm_crtc *crtc = NULL;
- struct drm_framebuffer *fb = NULL;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- /*
- * First, find the plane, crtc, and fb objects. If not available,
- * we don't bother to call the driver.
- */
- plane = drm_plane_find(dev, plane_req->plane_id);
- if (!plane) {
- DRM_DEBUG_KMS("Unknown plane ID %d\n",
- plane_req->plane_id);
- return -ENOENT;
- }
-
- if (plane_req->fb_id) {
- fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
- if (!fb) {
- DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
- plane_req->fb_id);
- return -ENOENT;
- }
-
- crtc = drm_crtc_find(dev, plane_req->crtc_id);
- if (!crtc) {
- DRM_DEBUG_KMS("Unknown crtc ID %d\n",
- plane_req->crtc_id);
- return -ENOENT;
- }
- }
-
- /*
- * setplane_internal will take care of deref'ing either the old or new
- * framebuffer depending on success.
- */
- return setplane_internal(plane, crtc, fb,
- plane_req->crtc_x, plane_req->crtc_y,
- plane_req->crtc_w, plane_req->crtc_h,
- plane_req->src_x, plane_req->src_y,
- plane_req->src_w, plane_req->src_h);
-}
-
-/**
* drm_mode_set_config_internal - helper to call ->set_config
* @set: modeset config to set
*
@@ -1276,8 +690,9 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
DRM_ROTATE_270))
swap(hdisplay, vdisplay);
- return check_src_coords(x << 16, y << 16,
- hdisplay << 16, vdisplay << 16, fb);
+ return drm_framebuffer_check_src_coords(x << 16, y << 16,
+ hdisplay << 16, vdisplay << 16,
+ fb);
}
EXPORT_SYMBOL(drm_crtc_check_viewport);
@@ -1464,208 +879,6 @@ out:
return ret;
}
-/**
- * drm_mode_cursor_universal - translate legacy cursor ioctl call into a
- * universal plane handler call
- * @crtc: crtc to update cursor for
- * @req: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Legacy cursor ioctl's work directly with driver buffer handles. To
- * translate legacy ioctl calls into universal plane handler calls, we need to
- * wrap the native buffer handle in a drm_framebuffer.
- *
- * Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB
- * buffer with a pitch of 4*width; the universal plane interface should be used
- * directly in cases where the hardware can support other buffer settings and
- * userspace wants to make use of these capabilities.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-static int drm_mode_cursor_universal(struct drm_crtc *crtc,
- struct drm_mode_cursor2 *req,
- struct drm_file *file_priv)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_framebuffer *fb = NULL;
- struct drm_mode_fb_cmd2 fbreq = {
- .width = req->width,
- .height = req->height,
- .pixel_format = DRM_FORMAT_ARGB8888,
- .pitches = { req->width * 4 },
- .handles = { req->handle },
- };
- int32_t crtc_x, crtc_y;
- uint32_t crtc_w = 0, crtc_h = 0;
- uint32_t src_w = 0, src_h = 0;
- int ret = 0;
-
- BUG_ON(!crtc->cursor);
- WARN_ON(crtc->cursor->crtc != crtc && crtc->cursor->crtc != NULL);
-
- /*
- * Obtain fb we'll be using (either new or existing) and take an extra
- * reference to it if fb != null. setplane will take care of dropping
- * the reference if the plane update fails.
- */
- if (req->flags & DRM_MODE_CURSOR_BO) {
- if (req->handle) {
- fb = drm_internal_framebuffer_create(dev, &fbreq, file_priv);
- if (IS_ERR(fb)) {
- DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
- return PTR_ERR(fb);
- }
- fb->hot_x = req->hot_x;
- fb->hot_y = req->hot_y;
- } else {
- fb = NULL;
- }
- } else {
- fb = crtc->cursor->fb;
- if (fb)
- drm_framebuffer_reference(fb);
- }
-
- if (req->flags & DRM_MODE_CURSOR_MOVE) {
- crtc_x = req->x;
- crtc_y = req->y;
- } else {
- crtc_x = crtc->cursor_x;
- crtc_y = crtc->cursor_y;
- }
-
- if (fb) {
- crtc_w = fb->width;
- crtc_h = fb->height;
- src_w = fb->width << 16;
- src_h = fb->height << 16;
- }
-
- /*
- * setplane_internal will take care of deref'ing either the old or new
- * framebuffer depending on success.
- */
- ret = __setplane_internal(crtc->cursor, crtc, fb,
- crtc_x, crtc_y, crtc_w, crtc_h,
- 0, 0, src_w, src_h);
-
- /* Update successful; save new cursor position, if necessary */
- if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
- crtc->cursor_x = req->x;
- crtc->cursor_y = req->y;
- }
-
- return ret;
-}
-
-static int drm_mode_cursor_common(struct drm_device *dev,
- struct drm_mode_cursor2 *req,
- struct drm_file *file_priv)
-{
- struct drm_crtc *crtc;
- int ret = 0;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
- return -EINVAL;
-
- crtc = drm_crtc_find(dev, req->crtc_id);
- if (!crtc) {
- DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
- return -ENOENT;
- }
-
- /*
- * If this crtc has a universal cursor plane, call that plane's update
- * handler rather than using legacy cursor handlers.
- */
- drm_modeset_lock_crtc(crtc, crtc->cursor);
- if (crtc->cursor) {
- ret = drm_mode_cursor_universal(crtc, req, file_priv);
- goto out;
- }
-
- if (req->flags & DRM_MODE_CURSOR_BO) {
- if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
- ret = -ENXIO;
- goto out;
- }
- /* Turns off the cursor if handle is 0 */
- if (crtc->funcs->cursor_set2)
- ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
- req->width, req->height, req->hot_x, req->hot_y);
- else
- ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
- req->width, req->height);
- }
-
- if (req->flags & DRM_MODE_CURSOR_MOVE) {
- if (crtc->funcs->cursor_move) {
- ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
- } else {
- ret = -EFAULT;
- goto out;
- }
- }
-out:
- drm_modeset_unlock_crtc(crtc);
-
- return ret;
-
-}
-
-
-/**
- * drm_mode_cursor_ioctl - set CRTC's cursor configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Set the cursor configuration based on user request.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_cursor_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv)
-{
- struct drm_mode_cursor *req = data;
- struct drm_mode_cursor2 new_req;
-
- memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
- new_req.hot_x = new_req.hot_y = 0;
-
- return drm_mode_cursor_common(dev, &new_req, file_priv);
-}
-
-/**
- * drm_mode_cursor2_ioctl - set CRTC's cursor configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Set the cursor configuration based on user request. This implements the 2nd
- * version of the cursor ioctl, which allows userspace to additionally specify
- * the hotspot of the pointer.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_cursor2_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv)
-{
- struct drm_mode_cursor2 *req = data;
-
- return drm_mode_cursor_common(dev, req, file_priv);
-}
-
int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
@@ -1682,35 +895,6 @@ int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
}
/**
- * drm_mode_plane_set_obj_prop - set the value of a property
- * @plane: drm plane object to set property value for
- * @property: property to set
- * @value: value the property should be set to
- *
- * This functions sets a given property on a given plane object. This function
- * calls the driver's ->set_property callback and changes the software state of
- * the property if the callback succeeds.
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
- struct drm_property *property,
- uint64_t value)
-{
- int ret = -EINVAL;
- struct drm_mode_object *obj = &plane->base;
-
- if (plane->funcs->set_property)
- ret = plane->funcs->set_property(plane, property, value);
- if (!ret)
- drm_object_property_set_value(obj, property, value);
-
- return ret;
-}
-EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
-
-/**
* drm_mode_crtc_set_gamma_size - set the gamma table size
* @crtc: CRTC to set the gamma table size for
* @gamma_size: size of the gamma table
@@ -1886,123 +1070,6 @@ out:
}
/**
- * drm_mode_page_flip_ioctl - schedule an asynchronous fb update
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This schedules an asynchronous update on a given CRTC, called page flip.
- * Optionally a drm event is generated to signal the completion of the event.
- * Generic drivers cannot assume that a pageflip with changed framebuffer
- * properties (including driver specific metadata like tiling layout) will work,
- * but some drivers support e.g. pixel format changes through the pageflip
- * ioctl.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_page_flip_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv)
-{
- struct drm_mode_crtc_page_flip *page_flip = data;
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb = NULL;
- struct drm_pending_vblank_event *e = NULL;
- int ret = -EINVAL;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS ||
- page_flip->reserved != 0)
- return -EINVAL;
-
- if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
- return -EINVAL;
-
- crtc = drm_crtc_find(dev, page_flip->crtc_id);
- if (!crtc)
- return -ENOENT;
-
- drm_modeset_lock_crtc(crtc, crtc->primary);
- if (crtc->primary->fb == NULL) {
- /* The framebuffer is currently unbound, presumably
- * due to a hotplug event, that userspace has not
- * yet discovered.
- */
- ret = -EBUSY;
- goto out;
- }
-
- if (crtc->funcs->page_flip == NULL)
- goto out;
-
- fb = drm_framebuffer_lookup(dev, page_flip->fb_id);
- if (!fb) {
- ret = -ENOENT;
- goto out;
- }
-
- if (crtc->state) {
- const struct drm_plane_state *state = crtc->primary->state;
-
- ret = check_src_coords(state->src_x, state->src_y,
- state->src_w, state->src_h, fb);
- } else {
- ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb);
- }
- if (ret)
- goto out;
-
- if (crtc->primary->fb->pixel_format != fb->pixel_format) {
- DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
- ret = -EINVAL;
- goto out;
- }
-
- if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
- e = kzalloc(sizeof *e, GFP_KERNEL);
- if (!e) {
- ret = -ENOMEM;
- goto out;
- }
- e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
- e->event.base.length = sizeof(e->event);
- e->event.user_data = page_flip->user_data;
- ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base);
- if (ret) {
- kfree(e);
- goto out;
- }
- }
-
- crtc->primary->old_fb = crtc->primary->fb;
- ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
- if (ret) {
- if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT)
- drm_event_cancel_free(dev, &e->base);
- /* Keep the old fb, don't unref it. */
- crtc->primary->old_fb = NULL;
- } else {
- crtc->primary->fb = fb;
- /* Unref only the old framebuffer. */
- fb = NULL;
- }
-
-out:
- if (fb)
- drm_framebuffer_unreference(fb);
- if (crtc->primary->old_fb)
- drm_framebuffer_unreference(crtc->primary->old_fb);
- crtc->primary->old_fb = NULL;
- drm_modeset_unlock_crtc(crtc);
-
- return ret;
-}
-
-/**
* drm_mode_config_reset - call ->reset callbacks
* @dev: drm device
*
diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
index 131ecfb16d7b..d538c2cc48f3 100644
--- a/drivers/gpu/drm/drm_crtc_internal.h
+++ b/drivers/gpu/drm/drm_crtc_internal.h
@@ -36,8 +36,6 @@
int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value);
-int drm_plane_check_pixel_format(const struct drm_plane *plane,
- u32 format);
int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
@@ -56,28 +54,15 @@ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
/* IOCTLs */
int drm_mode_getresources(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-int drm_mode_getplane_res(struct drm_device *dev, void *data,
- struct drm_file *file_priv);
int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
int drm_mode_setcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-int drm_mode_getplane(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
-int drm_mode_setplane(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
-int drm_mode_cursor_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
-int drm_mode_cursor2_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
int drm_mode_gamma_get_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-int drm_mode_page_flip_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
-
/* drm_property.c */
void drm_property_destroy_user_blobs(struct drm_device *dev,
struct drm_file *file_priv);
@@ -153,6 +138,9 @@ drm_internal_framebuffer_create(struct drm_device *dev,
const struct drm_mode_fb_cmd2 *r,
struct drm_file *file_priv);
void drm_framebuffer_free(struct kref *kref);
+int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h,
+ const struct drm_framebuffer *fb);
/* IOCTL */
int drm_mode_addfb(struct drm_device *dev,
@@ -179,3 +167,23 @@ void drm_modeset_unregister_all(struct drm_device *dev);
/* drm_blend.c */
int drm_atomic_normalize_zpos(struct drm_device *dev,
struct drm_atomic_state *state);
+
+/* drm_plane.c */
+int drm_plane_register_all(struct drm_device *dev);
+void drm_plane_unregister_all(struct drm_device *dev);
+int drm_plane_check_pixel_format(const struct drm_plane *plane,
+ u32 format);
+
+/* IOCTL */
+int drm_mode_getplane_res(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+int drm_mode_getplane(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+int drm_mode_setplane(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+int drm_mode_cursor_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+int drm_mode_cursor2_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+int drm_mode_page_flip_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index 20a8dd4d021b..5b3cc9b55d63 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -62,6 +62,32 @@
* &drm_framebuffer.
*/
+int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h,
+ const struct drm_framebuffer *fb)
+{
+ unsigned int fb_width, fb_height;
+
+ fb_width = fb->width << 16;
+ fb_height = fb->height << 16;
+
+ /* Make sure source coordinates are inside the fb. */
+ if (src_w > fb_width ||
+ src_x > fb_width - src_w ||
+ src_h > fb_height ||
+ src_y > fb_height - src_h) {
+ DRM_DEBUG_KMS("Invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
+ src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
+ src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
+ src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
+ src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
+ return -ENOSPC;
+ }
+
+ return 0;
+}
+
/**
* drm_mode_addfb - add an FB to the graphics configuration
* @dev: drm device for the ioctl
diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
new file mode 100644
index 000000000000..cb5ec1c3d0f6
--- /dev/null
+++ b/drivers/gpu/drm/drm_plane.c
@@ -0,0 +1,937 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_plane.h>
+
+#include "drm_crtc_internal.h"
+
+static unsigned int drm_num_planes(struct drm_device *dev)
+{
+ unsigned int num = 0;
+ struct drm_plane *tmp;
+
+ drm_for_each_plane(tmp, dev) {
+ num++;
+ }
+
+ return num;
+}
+
+/**
+ * drm_universal_plane_init - Initialize a new universal plane object
+ * @dev: DRM device
+ * @plane: plane object to init
+ * @possible_crtcs: bitmask of possible CRTCs
+ * @funcs: callbacks for the new plane
+ * @formats: array of supported formats (DRM_FORMAT\_\*)
+ * @format_count: number of elements in @formats
+ * @type: type of plane (overlay, primary, cursor)
+ * @name: printf style format string for the plane name, or NULL for default name
+ *
+ * Initializes a plane object of type @type.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats, unsigned int format_count,
+ enum drm_plane_type type,
+ const char *name, ...)
+{
+ struct drm_mode_config *config = &dev->mode_config;
+ int ret;
+
+ ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
+ if (ret)
+ return ret;
+
+ drm_modeset_lock_init(&plane->mutex);
+
+ plane->base.properties = &plane->properties;
+ plane->dev = dev;
+ plane->funcs = funcs;
+ plane->format_types = kmalloc_array(format_count, sizeof(uint32_t),
+ GFP_KERNEL);
+ if (!plane->format_types) {
+ DRM_DEBUG_KMS("out of memory when allocating plane\n");
+ drm_mode_object_unregister(dev, &plane->base);
+ return -ENOMEM;
+ }
+
+ if (name) {
+ va_list ap;
+
+ va_start(ap, name);
+ plane->name = kvasprintf(GFP_KERNEL, name, ap);
+ va_end(ap);
+ } else {
+ plane->name = kasprintf(GFP_KERNEL, "plane-%d",
+ drm_num_planes(dev));
+ }
+ if (!plane->name) {
+ kfree(plane->format_types);
+ drm_mode_object_unregister(dev, &plane->base);
+ return -ENOMEM;
+ }
+
+ memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
+ plane->format_count = format_count;
+ plane->possible_crtcs = possible_crtcs;
+ plane->type = type;
+
+ list_add_tail(&plane->head, &config->plane_list);
+ plane->index = config->num_total_plane++;
+ if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+ config->num_overlay_plane++;
+
+ drm_object_attach_property(&plane->base,
+ config->plane_type_property,
+ plane->type);
+
+ if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+ drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_x, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_y, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_w, 0);
+ drm_object_attach_property(&plane->base, config->prop_src_h, 0);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_universal_plane_init);
+
+int drm_plane_register_all(struct drm_device *dev)
+{
+ struct drm_plane *plane;
+ int ret = 0;
+
+ drm_for_each_plane(plane, dev) {
+ if (plane->funcs->late_register)
+ ret = plane->funcs->late_register(plane);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+void drm_plane_unregister_all(struct drm_device *dev)
+{
+ struct drm_plane *plane;
+
+ drm_for_each_plane(plane, dev) {
+ if (plane->funcs->early_unregister)
+ plane->funcs->early_unregister(plane);
+ }
+}
+
+/**
+ * drm_plane_init - Initialize a legacy plane
+ * @dev: DRM device
+ * @plane: plane object to init
+ * @possible_crtcs: bitmask of possible CRTCs
+ * @funcs: callbacks for the new plane
+ * @formats: array of supported formats (DRM_FORMAT\_\*)
+ * @format_count: number of elements in @formats
+ * @is_primary: plane type (primary vs overlay)
+ *
+ * Legacy API to initialize a DRM plane.
+ *
+ * New drivers should call drm_universal_plane_init() instead.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats, unsigned int format_count,
+ bool is_primary)
+{
+ enum drm_plane_type type;
+
+ type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
+ return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
+ formats, format_count, type, NULL);
+}
+EXPORT_SYMBOL(drm_plane_init);
+
+/**
+ * drm_plane_cleanup - Clean up the core plane usage
+ * @plane: plane to cleanup
+ *
+ * This function cleans up @plane and removes it from the DRM mode setting
+ * core. Note that the function does *not* free the plane structure itself,
+ * this is the responsibility of the caller.
+ */
+void drm_plane_cleanup(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+
+ drm_modeset_lock_all(dev);
+ kfree(plane->format_types);
+ drm_mode_object_unregister(dev, &plane->base);
+
+ BUG_ON(list_empty(&plane->head));
+
+ /* Note that the plane_list is considered to be static; should we
+ * remove the drm_plane at runtime we would have to decrement all
+ * the indices on the drm_plane after us in the plane_list.
+ */
+
+ list_del(&plane->head);
+ dev->mode_config.num_total_plane--;
+ if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+ dev->mode_config.num_overlay_plane--;
+ drm_modeset_unlock_all(dev);
+
+ WARN_ON(plane->state && !plane->funcs->atomic_destroy_state);
+ if (plane->state && plane->funcs->atomic_destroy_state)
+ plane->funcs->atomic_destroy_state(plane, plane->state);
+
+ kfree(plane->name);
+
+ memset(plane, 0, sizeof(*plane));
+}
+EXPORT_SYMBOL(drm_plane_cleanup);
+
+/**
+ * drm_plane_from_index - find the registered plane at an index
+ * @dev: DRM device
+ * @idx: index of registered plane to find for
+ *
+ * Given a plane index, return the registered plane from DRM device's
+ * list of planes with matching index.
+ */
+struct drm_plane *
+drm_plane_from_index(struct drm_device *dev, int idx)
+{
+ struct drm_plane *plane;
+
+ drm_for_each_plane(plane, dev)
+ if (idx == plane->index)
+ return plane;
+
+ return NULL;
+}
+EXPORT_SYMBOL(drm_plane_from_index);
+
+/**
+ * drm_plane_force_disable - Forcibly disable a plane
+ * @plane: plane to disable
+ *
+ * Forces the plane to be disabled.
+ *
+ * Used when the plane's current framebuffer is destroyed,
+ * and when restoring fbdev mode.
+ */
+void drm_plane_force_disable(struct drm_plane *plane)
+{
+ int ret;
+
+ if (!plane->fb)
+ return;
+
+ plane->old_fb = plane->fb;
+ ret = plane->funcs->disable_plane(plane);
+ if (ret) {
+ DRM_ERROR("failed to disable plane with busy fb\n");
+ plane->old_fb = NULL;
+ return;
+ }
+ /* disconnect the plane from the fb and crtc: */
+ drm_framebuffer_unreference(plane->old_fb);
+ plane->old_fb = NULL;
+ plane->fb = NULL;
+ plane->crtc = NULL;
+}
+EXPORT_SYMBOL(drm_plane_force_disable);
+
+/**
+ * drm_mode_plane_set_obj_prop - set the value of a property
+ * @plane: drm plane object to set property value for
+ * @property: property to set
+ * @value: value the property should be set to
+ *
+ * This functions sets a given property on a given plane object. This function
+ * calls the driver's ->set_property callback and changes the software state of
+ * the property if the callback succeeds.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+ struct drm_property *property,
+ uint64_t value)
+{
+ int ret = -EINVAL;
+ struct drm_mode_object *obj = &plane->base;
+
+ if (plane->funcs->set_property)
+ ret = plane->funcs->set_property(plane, property, value);
+ if (!ret)
+ drm_object_property_set_value(obj, property, value);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
+
+/**
+ * drm_mode_getplane_res - enumerate all plane resources
+ * @dev: DRM device
+ * @data: ioctl data
+ * @file_priv: DRM file info
+ *
+ * Construct a list of plane ids to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_getplane_res(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_get_plane_res *plane_resp = data;
+ struct drm_mode_config *config;
+ struct drm_plane *plane;
+ uint32_t __user *plane_ptr;
+ int copied = 0;
+ unsigned num_planes;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ config = &dev->mode_config;
+
+ if (file_priv->universal_planes)
+ num_planes = config->num_total_plane;
+ else
+ num_planes = config->num_overlay_plane;
+
+ /*
+ * This ioctl is called twice, once to determine how much space is
+ * needed, and the 2nd time to fill it.
+ */
+ if (num_planes &&
+ (plane_resp->count_planes >= num_planes)) {
+ plane_ptr = (uint32_t __user *)(unsigned long)plane_resp->plane_id_ptr;
+
+ /* Plane lists are invariant, no locking needed. */
+ drm_for_each_plane(plane, dev) {
+ /*
+ * Unless userspace set the 'universal planes'
+ * capability bit, only advertise overlays.
+ */
+ if (plane->type != DRM_PLANE_TYPE_OVERLAY &&
+ !file_priv->universal_planes)
+ continue;
+
+ if (put_user(plane->base.id, plane_ptr + copied))
+ return -EFAULT;
+ copied++;
+ }
+ }
+ plane_resp->count_planes = num_planes;
+
+ return 0;
+}
+
+/**
+ * drm_mode_getplane - get plane configuration
+ * @dev: DRM device
+ * @data: ioctl data
+ * @file_priv: DRM file info
+ *
+ * Construct a plane configuration structure to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_getplane(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_get_plane *plane_resp = data;
+ struct drm_plane *plane;
+ uint32_t __user *format_ptr;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ plane = drm_plane_find(dev, plane_resp->plane_id);
+ if (!plane)
+ return -ENOENT;
+
+ drm_modeset_lock(&plane->mutex, NULL);
+ if (plane->crtc)
+ plane_resp->crtc_id = plane->crtc->base.id;
+ else
+ plane_resp->crtc_id = 0;
+
+ if (plane->fb)
+ plane_resp->fb_id = plane->fb->base.id;
+ else
+ plane_resp->fb_id = 0;
+ drm_modeset_unlock(&plane->mutex);
+
+ plane_resp->plane_id = plane->base.id;
+ plane_resp->possible_crtcs = plane->possible_crtcs;
+ plane_resp->gamma_size = 0;
+
+ /*
+ * This ioctl is called twice, once to determine how much space is
+ * needed, and the 2nd time to fill it.
+ */
+ if (plane->format_count &&
+ (plane_resp->count_format_types >= plane->format_count)) {
+ format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr;
+ if (copy_to_user(format_ptr,
+ plane->format_types,
+ sizeof(uint32_t) * plane->format_count)) {
+ return -EFAULT;
+ }
+ }
+ plane_resp->count_format_types = plane->format_count;
+
+ return 0;
+}
+
+/**
+ * drm_plane_check_pixel_format - Check if the plane supports the pixel format
+ * @plane: plane to check for format support
+ * @format: the pixel format
+ *
+ * Returns:
+ * Zero of @plane has @format in its list of supported pixel formats, -EINVAL
+ * otherwise.
+ */
+int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
+{
+ unsigned int i;
+
+ for (i = 0; i < plane->format_count; i++) {
+ if (format == plane->format_types[i])
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * setplane_internal - setplane handler for internal callers
+ *
+ * Note that we assume an extra reference has already been taken on fb. If the
+ * update fails, this reference will be dropped before return; if it succeeds,
+ * the previous framebuffer (if any) will be unreferenced instead.
+ *
+ * src_{x,y,w,h} are provided in 16.16 fixed point format
+ */
+static int __setplane_internal(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int32_t crtc_x, int32_t crtc_y,
+ uint32_t crtc_w, uint32_t crtc_h,
+ /* src_{x,y,w,h} values are 16.16 fixed point */
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ int ret = 0;
+
+ /* No fb means shut it down */
+ if (!fb) {
+ plane->old_fb = plane->fb;
+ ret = plane->funcs->disable_plane(plane);
+ if (!ret) {
+ plane->crtc = NULL;
+ plane->fb = NULL;
+ } else {
+ plane->old_fb = NULL;
+ }
+ goto out;
+ }
+
+ /* Check whether this plane is usable on this CRTC */
+ if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
+ DRM_DEBUG_KMS("Invalid crtc for plane\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Check whether this plane supports the fb pixel format. */
+ ret = drm_plane_check_pixel_format(plane, fb->pixel_format);
+ if (ret) {
+ char *format_name = drm_get_format_name(fb->pixel_format);
+ DRM_DEBUG_KMS("Invalid pixel format %s\n", format_name);
+ kfree(format_name);
+ goto out;
+ }
+
+ /* Give drivers some help against integer overflows */
+ if (crtc_w > INT_MAX ||
+ crtc_x > INT_MAX - (int32_t) crtc_w ||
+ crtc_h > INT_MAX ||
+ crtc_y > INT_MAX - (int32_t) crtc_h) {
+ DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ crtc_w, crtc_h, crtc_x, crtc_y);
+ ret = -ERANGE;
+ goto out;
+ }
+
+ ret = drm_framebuffer_check_src_coords(src_x, src_y, src_w, src_h, fb);
+ if (ret)
+ goto out;
+
+ plane->old_fb = plane->fb;
+ ret = plane->funcs->update_plane(plane, crtc, fb,
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x, src_y, src_w, src_h);
+ if (!ret) {
+ plane->crtc = crtc;
+ plane->fb = fb;
+ fb = NULL;
+ } else {
+ plane->old_fb = NULL;
+ }
+
+out:
+ if (fb)
+ drm_framebuffer_unreference(fb);
+ if (plane->old_fb)
+ drm_framebuffer_unreference(plane->old_fb);
+ plane->old_fb = NULL;
+
+ return ret;
+}
+
+static int setplane_internal(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int32_t crtc_x, int32_t crtc_y,
+ uint32_t crtc_w, uint32_t crtc_h,
+ /* src_{x,y,w,h} values are 16.16 fixed point */
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ int ret;
+
+ drm_modeset_lock_all(plane->dev);
+ ret = __setplane_internal(plane, crtc, fb,
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x, src_y, src_w, src_h);
+ drm_modeset_unlock_all(plane->dev);
+
+ return ret;
+}
+
+/**
+ * drm_mode_setplane - configure a plane's configuration
+ * @dev: DRM device
+ * @data: ioctl data*
+ * @file_priv: DRM file info
+ *
+ * Set plane configuration, including placement, fb, scaling, and other factors.
+ * Or pass a NULL fb to disable (planes may be disabled without providing a
+ * valid crtc).
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_setplane(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_set_plane *plane_req = data;
+ struct drm_plane *plane;
+ struct drm_crtc *crtc = NULL;
+ struct drm_framebuffer *fb = NULL;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ /*
+ * First, find the plane, crtc, and fb objects. If not available,
+ * we don't bother to call the driver.
+ */
+ plane = drm_plane_find(dev, plane_req->plane_id);
+ if (!plane) {
+ DRM_DEBUG_KMS("Unknown plane ID %d\n",
+ plane_req->plane_id);
+ return -ENOENT;
+ }
+
+ if (plane_req->fb_id) {
+ fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
+ if (!fb) {
+ DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
+ plane_req->fb_id);
+ return -ENOENT;
+ }
+
+ crtc = drm_crtc_find(dev, plane_req->crtc_id);
+ if (!crtc) {
+ DRM_DEBUG_KMS("Unknown crtc ID %d\n",
+ plane_req->crtc_id);
+ return -ENOENT;
+ }
+ }
+
+ /*
+ * setplane_internal will take care of deref'ing either the old or new
+ * framebuffer depending on success.
+ */
+ return setplane_internal(plane, crtc, fb,
+ plane_req->crtc_x, plane_req->crtc_y,
+ plane_req->crtc_w, plane_req->crtc_h,
+ plane_req->src_x, plane_req->src_y,
+ plane_req->src_w, plane_req->src_h);
+}
+
+/**
+ * drm_mode_cursor_universal - translate legacy cursor ioctl call into a
+ * universal plane handler call
+ * @crtc: crtc to update cursor for
+ * @req: data pointer for the ioctl
+ * @file_priv: drm file for the ioctl call
+ *
+ * Legacy cursor ioctl's work directly with driver buffer handles. To
+ * translate legacy ioctl calls into universal plane handler calls, we need to
+ * wrap the native buffer handle in a drm_framebuffer.
+ *
+ * Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB
+ * buffer with a pitch of 4*width; the universal plane interface should be used
+ * directly in cases where the hardware can support other buffer settings and
+ * userspace wants to make use of these capabilities.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+static int drm_mode_cursor_universal(struct drm_crtc *crtc,
+ struct drm_mode_cursor2 *req,
+ struct drm_file *file_priv)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_framebuffer *fb = NULL;
+ struct drm_mode_fb_cmd2 fbreq = {
+ .width = req->width,
+ .height = req->height,
+ .pixel_format = DRM_FORMAT_ARGB8888,
+ .pitches = { req->width * 4 },
+ .handles = { req->handle },
+ };
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w = 0, crtc_h = 0;
+ uint32_t src_w = 0, src_h = 0;
+ int ret = 0;
+
+ BUG_ON(!crtc->cursor);
+ WARN_ON(crtc->cursor->crtc != crtc && crtc->cursor->crtc != NULL);
+
+ /*
+ * Obtain fb we'll be using (either new or existing) and take an extra
+ * reference to it if fb != null. setplane will take care of dropping
+ * the reference if the plane update fails.
+ */
+ if (req->flags & DRM_MODE_CURSOR_BO) {
+ if (req->handle) {
+ fb = drm_internal_framebuffer_create(dev, &fbreq, file_priv);
+ if (IS_ERR(fb)) {
+ DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
+ return PTR_ERR(fb);
+ }
+ fb->hot_x = req->hot_x;
+ fb->hot_y = req->hot_y;
+ } else {
+ fb = NULL;
+ }
+ } else {
+ fb = crtc->cursor->fb;
+ if (fb)
+ drm_framebuffer_reference(fb);
+ }
+
+ if (req->flags & DRM_MODE_CURSOR_MOVE) {
+ crtc_x = req->x;
+ crtc_y = req->y;
+ } else {
+ crtc_x = crtc->cursor_x;
+ crtc_y = crtc->cursor_y;
+ }
+
+ if (fb) {
+ crtc_w = fb->width;
+ crtc_h = fb->height;
+ src_w = fb->width << 16;
+ src_h = fb->height << 16;
+ }
+
+ /*
+ * setplane_internal will take care of deref'ing either the old or new
+ * framebuffer depending on success.
+ */
+ ret = __setplane_internal(crtc->cursor, crtc, fb,
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ 0, 0, src_w, src_h);
+
+ /* Update successful; save new cursor position, if necessary */
+ if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
+ crtc->cursor_x = req->x;
+ crtc->cursor_y = req->y;
+ }
+
+ return ret;
+}
+
+static int drm_mode_cursor_common(struct drm_device *dev,
+ struct drm_mode_cursor2 *req,
+ struct drm_file *file_priv)
+{
+ struct drm_crtc *crtc;
+ int ret = 0;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
+ return -EINVAL;
+
+ crtc = drm_crtc_find(dev, req->crtc_id);
+ if (!crtc) {
+ DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
+ return -ENOENT;
+ }
+
+ /*
+ * If this crtc has a universal cursor plane, call that plane's update
+ * handler rather than using legacy cursor handlers.
+ */
+ drm_modeset_lock_crtc(crtc, crtc->cursor);
+ if (crtc->cursor) {
+ ret = drm_mode_cursor_universal(crtc, req, file_priv);
+ goto out;
+ }
+
+ if (req->flags & DRM_MODE_CURSOR_BO) {
+ if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
+ ret = -ENXIO;
+ goto out;
+ }
+ /* Turns off the cursor if handle is 0 */
+ if (crtc->funcs->cursor_set2)
+ ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
+ req->width, req->height, req->hot_x, req->hot_y);
+ else
+ ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
+ req->width, req->height);
+ }
+
+ if (req->flags & DRM_MODE_CURSOR_MOVE) {
+ if (crtc->funcs->cursor_move) {
+ ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
+ } else {
+ ret = -EFAULT;
+ goto out;
+ }
+ }
+out:
+ drm_modeset_unlock_crtc(crtc);
+
+ return ret;
+
+}
+
+
+/**
+ * drm_mode_cursor_ioctl - set CRTC's cursor configuration
+ * @dev: drm device for the ioctl
+ * @data: data pointer for the ioctl
+ * @file_priv: drm file for the ioctl call
+ *
+ * Set the cursor configuration based on user request.
+ *
+ * Called by the user via ioctl.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_cursor_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv)
+{
+ struct drm_mode_cursor *req = data;
+ struct drm_mode_cursor2 new_req;
+
+ memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
+ new_req.hot_x = new_req.hot_y = 0;
+
+ return drm_mode_cursor_common(dev, &new_req, file_priv);
+}
+
+/**
+ * drm_mode_cursor2_ioctl - set CRTC's cursor configuration
+ * @dev: drm device for the ioctl
+ * @data: data pointer for the ioctl
+ * @file_priv: drm file for the ioctl call
+ *
+ * Set the cursor configuration based on user request. This implements the 2nd
+ * version of the cursor ioctl, which allows userspace to additionally specify
+ * the hotspot of the pointer.
+ *
+ * Called by the user via ioctl.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_cursor2_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv)
+{
+ struct drm_mode_cursor2 *req = data;
+
+ return drm_mode_cursor_common(dev, req, file_priv);
+}
+
+/**
+ * drm_mode_page_flip_ioctl - schedule an asynchronous fb update
+ * @dev: DRM device
+ * @data: ioctl data
+ * @file_priv: DRM file info
+ *
+ * This schedules an asynchronous update on a given CRTC, called page flip.
+ * Optionally a drm event is generated to signal the completion of the event.
+ * Generic drivers cannot assume that a pageflip with changed framebuffer
+ * properties (including driver specific metadata like tiling layout) will work,
+ * but some drivers support e.g. pixel format changes through the pageflip
+ * ioctl.
+ *
+ * Called by the user via ioctl.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_page_flip_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv)
+{
+ struct drm_mode_crtc_page_flip *page_flip = data;
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb = NULL;
+ struct drm_pending_vblank_event *e = NULL;
+ int ret = -EINVAL;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS ||
+ page_flip->reserved != 0)
+ return -EINVAL;
+
+ if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
+ return -EINVAL;
+
+ crtc = drm_crtc_find(dev, page_flip->crtc_id);
+ if (!crtc)
+ return -ENOENT;
+
+ drm_modeset_lock_crtc(crtc, crtc->primary);
+ if (crtc->primary->fb == NULL) {
+ /* The framebuffer is currently unbound, presumably
+ * due to a hotplug event, that userspace has not
+ * yet discovered.
+ */
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (crtc->funcs->page_flip == NULL)
+ goto out;
+
+ fb = drm_framebuffer_lookup(dev, page_flip->fb_id);
+ if (!fb) {
+ ret = -ENOENT;
+ goto out;
+ }
+
+ if (crtc->state) {
+ const struct drm_plane_state *state = crtc->primary->state;
+
+ ret = drm_framebuffer_check_src_coords(state->src_x,
+ state->src_y,
+ state->src_w,
+ state->src_h,
+ fb);
+ } else {
+ ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb);
+ }
+ if (ret)
+ goto out;
+
+ if (crtc->primary->fb->pixel_format != fb->pixel_format) {
+ DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
+ e = kzalloc(sizeof *e, GFP_KERNEL);
+ if (!e) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
+ e->event.base.length = sizeof(e->event);
+ e->event.user_data = page_flip->user_data;
+ ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base);
+ if (ret) {
+ kfree(e);
+ goto out;
+ }
+ }
+
+ crtc->primary->old_fb = crtc->primary->fb;
+ ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
+ if (ret) {
+ if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT)
+ drm_event_cancel_free(dev, &e->base);
+ /* Keep the old fb, don't unref it. */
+ crtc->primary->old_fb = NULL;
+ } else {
+ crtc->primary->fb = fb;
+ /* Unref only the old framebuffer. */
+ fb = NULL;
+ }
+
+out:
+ if (fb)
+ drm_framebuffer_unreference(fb);
+ if (crtc->primary->old_fb)
+ drm_framebuffer_unreference(crtc->primary->old_fb);
+ crtc->primary->old_fb = NULL;
+ drm_modeset_unlock_crtc(crtc);
+
+ return ret;
+}
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index 856a9c85a838..9701f2dfb784 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -30,6 +30,160 @@
#include <drm/drm_crtc.h>
+/**
+ * struct drm_crtc_commit - track modeset commits on a CRTC
+ *
+ * This structure is used to track pending modeset changes and atomic commit on
+ * a per-CRTC basis. Since updating the list should never block this structure
+ * is reference counted to allow waiters to safely wait on an event to complete,
+ * without holding any locks.
+ *
+ * It has 3 different events in total to allow a fine-grained synchronization
+ * between outstanding updates::
+ *
+ * atomic commit thread hardware
+ *
+ * write new state into hardware ----> ...
+ * signal hw_done
+ * switch to new state on next
+ * ... v/hblank
+ *
+ * wait for buffers to show up ...
+ *
+ * ... send completion irq
+ * irq handler signals flip_done
+ * cleanup old buffers
+ *
+ * signal cleanup_done
+ *
+ * wait for flip_done <----
+ * clean up atomic state
+ *
+ * The important bit to know is that cleanup_done is the terminal event, but the
+ * ordering between flip_done and hw_done is entirely up to the specific driver
+ * and modeset state change.
+ *
+ * For an implementation of how to use this look at
+ * drm_atomic_helper_setup_commit() from the atomic helper library.
+ */
+struct drm_crtc_commit {
+ /**
+ * @crtc:
+ *
+ * DRM CRTC for this commit.
+ */
+ struct drm_crtc *crtc;
+
+ /**
+ * @ref:
+ *
+ * Reference count for this structure. Needed to allow blocking on
+ * completions without the risk of the completion disappearing
+ * meanwhile.
+ */
+ struct kref ref;
+
+ /**
+ * @flip_done:
+ *
+ * Will be signaled when the hardware has flipped to the new set of
+ * buffers. Signals at the same time as when the drm event for this
+ * commit is sent to userspace, or when an out-fence is singalled. Note
+ * that for most hardware, in most cases this happens after @hw_done is
+ * signalled.
+ */
+ struct completion flip_done;
+
+ /**
+ * @hw_done:
+ *
+ * Will be signalled when all hw register changes for this commit have
+ * been written out. Especially when disabling a pipe this can be much
+ * later than than @flip_done, since that can signal already when the
+ * screen goes black, whereas to fully shut down a pipe more register
+ * I/O is required.
+ *
+ * Note that this does not need to include separately reference-counted
+ * resources like backing storage buffer pinning, or runtime pm
+ * management.
+ */
+ struct completion hw_done;
+
+ /**
+ * @cleanup_done:
+ *
+ * Will be signalled after old buffers have been cleaned up by calling
+ * drm_atomic_helper_cleanup_planes(). Since this can only happen after
+ * a vblank wait completed it might be a bit later. This completion is
+ * useful to throttle updates and avoid hardware updates getting ahead
+ * of the buffer cleanup too much.
+ */
+ struct completion cleanup_done;
+
+ /**
+ * @commit_entry:
+ *
+ * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+ */
+ struct list_head commit_entry;
+
+ /**
+ * @event:
+ *
+ * &drm_pending_vblank_event pointer to clean up private events.
+ */
+ struct drm_pending_vblank_event *event;
+};
+
+struct __drm_planes_state {
+ struct drm_plane *ptr;
+ struct drm_plane_state *state;
+};
+
+struct __drm_crtcs_state {
+ struct drm_crtc *ptr;
+ struct drm_crtc_state *state;
+ struct drm_crtc_commit *commit;
+};
+
+struct __drm_connnectors_state {
+ struct drm_connector *ptr;
+ struct drm_connector_state *state;
+};
+
+/**
+ * struct drm_atomic_state - the global state object for atomic updates
+ * @dev: parent DRM device
+ * @allow_modeset: allow full modeset
+ * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
+ * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
+ * @planes: pointer to array of structures with per-plane data
+ * @crtcs: pointer to array of CRTC pointers
+ * @num_connector: size of the @connectors and @connector_states arrays
+ * @connectors: pointer to array of structures with per-connector data
+ * @acquire_ctx: acquire context for this atomic modeset state update
+ */
+struct drm_atomic_state {
+ struct drm_device *dev;
+ bool allow_modeset : 1;
+ bool legacy_cursor_update : 1;
+ bool legacy_set_config : 1;
+ struct __drm_planes_state *planes;
+ struct __drm_crtcs_state *crtcs;
+ int num_connector;
+ struct __drm_connnectors_state *connectors;
+
+ struct drm_modeset_acquire_ctx *acquire_ctx;
+
+ /**
+ * @commit_work:
+ *
+ * Work item which can be used by the driver or helpers to execute the
+ * commit without blocking.
+ */
+ struct work_struct commit_work;
+};
+
void drm_crtc_commit_put(struct drm_crtc_commit *commit);
static inline void drm_crtc_commit_get(struct drm_crtc_commit *commit)
{
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 7bb3aa87a8be..86e13a590c8f 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -44,6 +44,7 @@
#include <drm/drm_property.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
+#include <drm/drm_plane.h>
struct drm_device;
struct drm_mode_set;
@@ -639,525 +640,6 @@ struct drm_crtc {
};
/**
- * struct drm_plane_state - mutable plane state
- * @plane: backpointer to the plane
- * @crtc: currently bound CRTC, NULL if disabled
- * @fb: currently bound framebuffer
- * @fence: optional fence to wait for before scanning out @fb
- * @crtc_x: left position of visible portion of plane on crtc
- * @crtc_y: upper position of visible portion of plane on crtc
- * @crtc_w: width of visible portion of plane on crtc
- * @crtc_h: height of visible portion of plane on crtc
- * @src_x: left position of visible portion of plane within
- * plane (in 16.16)
- * @src_y: upper position of visible portion of plane within
- * plane (in 16.16)
- * @src_w: width of visible portion of plane (in 16.16)
- * @src_h: height of visible portion of plane (in 16.16)
- * @rotation: rotation of the plane
- * @zpos: priority of the given plane on crtc (optional)
- * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
- * where N is the number of active planes for given crtc
- * @src: clipped source coordinates of the plane (in 16.16)
- * @dst: clipped destination coordinates of the plane
- * @visible: visibility of the plane
- * @state: backpointer to global drm_atomic_state
- */
-struct drm_plane_state {
- struct drm_plane *plane;
-
- struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */
- struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */
- struct fence *fence;
-
- /* Signed dest location allows it to be partially off screen */
- int32_t crtc_x, crtc_y;
- uint32_t crtc_w, crtc_h;
-
- /* Source values are 16.16 fixed point */
- uint32_t src_x, src_y;
- uint32_t src_h, src_w;
-
- /* Plane rotation */
- unsigned int rotation;
-
- /* Plane zpos */
- unsigned int zpos;
- unsigned int normalized_zpos;
-
- /* Clipped coordinates */
- struct drm_rect src, dst;
-
- /*
- * Is the plane actually visible? Can be false even
- * if fb!=NULL and crtc!=NULL, due to clipping.
- */
- bool visible;
-
- struct drm_atomic_state *state;
-};
-
-
-/**
- * struct drm_plane_funcs - driver plane control functions
- */
-struct drm_plane_funcs {
- /**
- * @update_plane:
- *
- * This is the legacy entry point to enable and configure the plane for
- * the given CRTC and framebuffer. It is never called to disable the
- * plane, i.e. the passed-in crtc and fb paramters are never NULL.
- *
- * The source rectangle in frame buffer memory coordinates is given by
- * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
- * values). Devices that don't support subpixel plane coordinates can
- * ignore the fractional part.
- *
- * The destination rectangle in CRTC coordinates is given by the
- * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
- * Devices scale the source rectangle to the destination rectangle. If
- * scaling is not supported, and the source rectangle size doesn't match
- * the destination rectangle size, the driver must return a
- * -<errorname>EINVAL</errorname> error.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_update_plane() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*update_plane)(struct drm_plane *plane,
- struct drm_crtc *crtc, struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);
-
- /**
- * @disable_plane:
- *
- * This is the legacy entry point to disable the plane. The DRM core
- * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
- * with the frame buffer ID set to 0. Disabled planes must not be
- * processed by the CRTC.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_disable_plane() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*disable_plane)(struct drm_plane *plane);
-
- /**
- * @destroy:
- *
- * Clean up plane resources. This is only called at driver unload time
- * through drm_mode_config_cleanup() since a plane cannot be hotplugged
- * in DRM.
- */
- void (*destroy)(struct drm_plane *plane);
-
- /**
- * @reset:
- *
- * Reset plane hardware and software state to off. This function isn't
- * called by the core directly, only through drm_mode_config_reset().
- * It's not a helper hook only for historical reasons.
- *
- * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
- * atomic state using this hook.
- */
- void (*reset)(struct drm_plane *plane);
-
- /**
- * @set_property:
- *
- * This is the legacy entry point to update a property attached to the
- * plane.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_plane_set_property() to implement this hook.
- *
- * This callback is optional if the driver does not support any legacy
- * driver-private properties.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*set_property)(struct drm_plane *plane,
- struct drm_property *property, uint64_t val);
-
- /**
- * @atomic_duplicate_state:
- *
- * Duplicate the current atomic state for this plane and return it.
- * The core and helpers gurantee that any atomic state duplicated with
- * this hook and still owned by the caller (i.e. not transferred to the
- * driver by calling ->atomic_commit() from struct
- * &drm_mode_config_funcs) will be cleaned up by calling the
- * @atomic_destroy_state hook in this structure.
- *
- * Atomic drivers which don't subclass struct &drm_plane_state should use
- * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
- * state structure to extend it with driver-private state should use
- * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
- * duplicated in a consistent fashion across drivers.
- *
- * It is an error to call this hook before plane->state has been
- * initialized correctly.
- *
- * NOTE:
- *
- * If the duplicate state references refcounted resources this hook must
- * acquire a reference for each of them. The driver must release these
- * references again in @atomic_destroy_state.
- *
- * RETURNS:
- *
- * Duplicated atomic state or NULL when the allocation failed.
- */
- struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
-
- /**
- * @atomic_destroy_state:
- *
- * Destroy a state duplicated with @atomic_duplicate_state and release
- * or unreference all resources it references
- */
- void (*atomic_destroy_state)(struct drm_plane *plane,
- struct drm_plane_state *state);
-
- /**
- * @atomic_set_property:
- *
- * Decode a driver-private property value and store the decoded value
- * into the passed-in state structure. Since the atomic core decodes all
- * standardized properties (even for extensions beyond the core set of
- * properties which might not be implemented by all drivers) this
- * requires drivers to subclass the state structure.
- *
- * Such driver-private properties should really only be implemented for
- * truly hardware/vendor specific state. Instead it is preferred to
- * standardize atomic extension and decode the properties used to expose
- * such an extension in the core.
- *
- * Do not call this function directly, use
- * drm_atomic_plane_set_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * NOTE:
- *
- * This function is called in the state assembly phase of atomic
- * modesets, which can be aborted for any reason (including on
- * userspace's request to just check whether a configuration would be
- * possible). Drivers MUST NOT touch any persistent state (hardware or
- * software) or data structures except the passed in @state parameter.
- *
- * Also since userspace controls in which order properties are set this
- * function must not do any input validation (since the state update is
- * incomplete and hence likely inconsistent). Instead any such input
- * validation must be done in the various atomic_check callbacks.
- *
- * RETURNS:
- *
- * 0 if the property has been found, -EINVAL if the property isn't
- * implemented by the driver (which shouldn't ever happen, the core only
- * asks for properties attached to this plane). No other validation is
- * allowed by the driver. The core already checks that the property
- * value is within the range (integer, valid enum value, ...) the driver
- * set when registering the property.
- */
- int (*atomic_set_property)(struct drm_plane *plane,
- struct drm_plane_state *state,
- struct drm_property *property,
- uint64_t val);
-
- /**
- * @atomic_get_property:
- *
- * Reads out the decoded driver-private property. This is used to
- * implement the GETPLANE IOCTL.
- *
- * Do not call this function directly, use
- * drm_atomic_plane_get_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * RETURNS:
- *
- * 0 on success, -EINVAL if the property isn't implemented by the
- * driver (which should never happen, the core only asks for
- * properties attached to this plane).
- */
- int (*atomic_get_property)(struct drm_plane *plane,
- const struct drm_plane_state *state,
- struct drm_property *property,
- uint64_t *val);
- /**
- * @late_register:
- *
- * This optional hook can be used to register additional userspace
- * interfaces attached to the plane like debugfs interfaces.
- * It is called late in the driver load sequence from drm_dev_register().
- * Everything added from this callback should be unregistered in
- * the early_unregister callback.
- *
- * Returns:
- *
- * 0 on success, or a negative error code on failure.
- */
- int (*late_register)(struct drm_plane *plane);
-
- /**
- * @early_unregister:
- *
- * This optional hook should be used to unregister the additional
- * userspace interfaces attached to the plane from
- * late_unregister(). It is called from drm_dev_unregister(),
- * early in the driver unload sequence to disable userspace access
- * before data structures are torndown.
- */
- void (*early_unregister)(struct drm_plane *plane);
-};
-
-enum drm_plane_type {
- DRM_PLANE_TYPE_OVERLAY,
- DRM_PLANE_TYPE_PRIMARY,
- DRM_PLANE_TYPE_CURSOR,
-};
-
-
-/**
- * struct drm_plane - central DRM plane control structure
- * @dev: DRM device this plane belongs to
- * @head: for list management
- * @name: human readable name, can be overwritten by the driver
- * @base: base mode object
- * @possible_crtcs: pipes this plane can be bound to
- * @format_types: array of formats supported by this plane
- * @format_count: number of formats supported
- * @format_default: driver hasn't supplied supported formats for the plane
- * @crtc: currently bound CRTC
- * @fb: currently bound fb
- * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
- * drm_mode_set_config_internal() to implement correct refcounting.
- * @funcs: helper functions
- * @properties: property tracking for this plane
- * @type: type of plane (overlay, primary, cursor)
- * @state: current atomic state for this plane
- * @zpos_property: zpos property for this plane
- * @helper_private: mid-layer private data
- */
-struct drm_plane {
- struct drm_device *dev;
- struct list_head head;
-
- char *name;
-
- /**
- * @mutex:
- *
- * Protects modeset plane state, together with the mutex of &drm_crtc
- * this plane is linked to (when active, getting actived or getting
- * disabled).
- */
- struct drm_modeset_lock mutex;
-
- struct drm_mode_object base;
-
- uint32_t possible_crtcs;
- uint32_t *format_types;
- unsigned int format_count;
- bool format_default;
-
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb;
-
- struct drm_framebuffer *old_fb;
-
- const struct drm_plane_funcs *funcs;
-
- struct drm_object_properties properties;
-
- enum drm_plane_type type;
-
- /**
- * @index: Position inside the mode_config.list, can be used as an array
- * index. It is invariant over the lifetime of the plane.
- */
- unsigned index;
-
- const struct drm_plane_helper_funcs *helper_private;
-
- struct drm_plane_state *state;
-
- struct drm_property *zpos_property;
-};
-
-/**
- * struct drm_crtc_commit - track modeset commits on a CRTC
- *
- * This structure is used to track pending modeset changes and atomic commit on
- * a per-CRTC basis. Since updating the list should never block this structure
- * is reference counted to allow waiters to safely wait on an event to complete,
- * without holding any locks.
- *
- * It has 3 different events in total to allow a fine-grained synchronization
- * between outstanding updates::
- *
- * atomic commit thread hardware
- *
- * write new state into hardware ----> ...
- * signal hw_done
- * switch to new state on next
- * ... v/hblank
- *
- * wait for buffers to show up ...
- *
- * ... send completion irq
- * irq handler signals flip_done
- * cleanup old buffers
- *
- * signal cleanup_done
- *
- * wait for flip_done <----
- * clean up atomic state
- *
- * The important bit to know is that cleanup_done is the terminal event, but the
- * ordering between flip_done and hw_done is entirely up to the specific driver
- * and modeset state change.
- *
- * For an implementation of how to use this look at
- * drm_atomic_helper_setup_commit() from the atomic helper library.
- */
-struct drm_crtc_commit {
- /**
- * @crtc:
- *
- * DRM CRTC for this commit.
- */
- struct drm_crtc *crtc;
-
- /**
- * @ref:
- *
- * Reference count for this structure. Needed to allow blocking on
- * completions without the risk of the completion disappearing
- * meanwhile.
- */
- struct kref ref;
-
- /**
- * @flip_done:
- *
- * Will be signaled when the hardware has flipped to the new set of
- * buffers. Signals at the same time as when the drm event for this
- * commit is sent to userspace, or when an out-fence is singalled. Note
- * that for most hardware, in most cases this happens after @hw_done is
- * signalled.
- */
- struct completion flip_done;
-
- /**
- * @hw_done:
- *
- * Will be signalled when all hw register changes for this commit have
- * been written out. Especially when disabling a pipe this can be much
- * later than than @flip_done, since that can signal already when the
- * screen goes black, whereas to fully shut down a pipe more register
- * I/O is required.
- *
- * Note that this does not need to include separately reference-counted
- * resources like backing storage buffer pinning, or runtime pm
- * management.
- */
- struct completion hw_done;
-
- /**
- * @cleanup_done:
- *
- * Will be signalled after old buffers have been cleaned up by calling
- * drm_atomic_helper_cleanup_planes(). Since this can only happen after
- * a vblank wait completed it might be a bit later. This completion is
- * useful to throttle updates and avoid hardware updates getting ahead
- * of the buffer cleanup too much.
- */
- struct completion cleanup_done;
-
- /**
- * @commit_entry:
- *
- * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
- */
- struct list_head commit_entry;
-
- /**
- * @event:
- *
- * &drm_pending_vblank_event pointer to clean up private events.
- */
- struct drm_pending_vblank_event *event;
-};
-
-struct __drm_planes_state {
- struct drm_plane *ptr;
- struct drm_plane_state *state;
-};
-
-struct __drm_crtcs_state {
- struct drm_crtc *ptr;
- struct drm_crtc_state *state;
- struct drm_crtc_commit *commit;
-};
-
-struct __drm_connnectors_state {
- struct drm_connector *ptr;
- struct drm_connector_state *state;
-};
-
-/**
- * struct drm_atomic_state - the global state object for atomic updates
- * @dev: parent DRM device
- * @allow_modeset: allow full modeset
- * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
- * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
- * @planes: pointer to array of structures with per-plane data
- * @crtcs: pointer to array of CRTC pointers
- * @num_connector: size of the @connectors and @connector_states arrays
- * @connectors: pointer to array of structures with per-connector data
- * @acquire_ctx: acquire context for this atomic modeset state update
- */
-struct drm_atomic_state {
- struct drm_device *dev;
- bool allow_modeset : 1;
- bool legacy_cursor_update : 1;
- bool legacy_set_config : 1;
- struct __drm_planes_state *planes;
- struct __drm_crtcs_state *crtcs;
- int num_connector;
- struct __drm_connnectors_state *connectors;
-
- struct drm_modeset_acquire_ctx *acquire_ctx;
-
- /**
- * @commit_work:
- *
- * Work item which can be used by the driver or helpers to execute the
- * commit without blocking.
- */
- struct work_struct commit_work;
-};
-
-
-/**
* struct drm_mode_set - new values for a CRTC config change
* @fb: framebuffer to use for new config
* @crtc: CRTC whose configuration we're about to change
@@ -1813,20 +1295,7 @@ struct drm_mode_config {
struct drm_mode_config_helper_funcs *helper_private;
};
-/**
- * drm_for_each_plane_mask - iterate over planes specified by bitmask
- * @plane: the loop cursor
- * @dev: the DRM device
- * @plane_mask: bitmask of plane indices
- *
- * Iterate over all planes specified by bitmask.
- */
-#define drm_for_each_plane_mask(plane, dev, plane_mask) \
- list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
- for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
-
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
-#define obj_to_plane(x) container_of(x, struct drm_plane, base)
extern __printf(6, 7)
int drm_crtc_init_with_planes(struct drm_device *dev,
@@ -1861,36 +1330,6 @@ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc)
return 1 << drm_crtc_index(crtc);
}
-extern __printf(8, 9)
-int drm_universal_plane_init(struct drm_device *dev,
- struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats,
- unsigned int format_count,
- enum drm_plane_type type,
- const char *name, ...);
-extern int drm_plane_init(struct drm_device *dev,
- struct drm_plane *plane,
- unsigned long possible_crtcs,
- const struct drm_plane_funcs *funcs,
- const uint32_t *formats, unsigned int format_count,
- bool is_primary);
-extern void drm_plane_cleanup(struct drm_plane *plane);
-
-/**
- * drm_plane_index - find the index of a registered plane
- * @plane: plane to find index for
- *
- * Given a registered plane, return the index of that plane within a DRM
- * device's list of planes.
- */
-static inline unsigned int drm_plane_index(struct drm_plane *plane)
-{
- return plane->index;
-}
-extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
-extern void drm_plane_force_disable(struct drm_plane *plane);
extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay);
extern int drm_crtc_force_disable(struct drm_crtc *crtc);
@@ -1912,10 +1351,6 @@ extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
extern void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg);
-extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
- struct drm_property *property,
- uint64_t value);
-
extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
unsigned int supported_rotations);
extern unsigned int drm_rotation_simplify(unsigned int rotation,
@@ -1933,14 +1368,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
unsigned int zpos);
/* Helpers */
-static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
- uint32_t id)
-{
- struct drm_mode_object *mo;
- mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PLANE);
- return mo ? obj_to_plane(mo) : NULL;
-}
-
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
uint32_t id)
{
@@ -1968,14 +1395,6 @@ static inline uint32_t drm_color_lut_extract(uint32_t user_input,
return clamp_val(val, 0, max);
}
-/* Plane list iterator for legacy (overlay only) planes. */
-#define drm_for_each_legacy_plane(plane, dev) \
- list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
- for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
-
-#define drm_for_each_plane(plane, dev) \
- list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
-
#define drm_for_each_crtc(crtc, dev) \
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
new file mode 100644
index 000000000000..1407715736a5
--- /dev/null
+++ b/include/drm/drm_plane.h
@@ -0,0 +1,470 @@
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_PLANE_H__
+#define __DRM_PLANE_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_mode_object.h>
+
+struct drm_crtc;
+
+/**
+ * struct drm_plane_state - mutable plane state
+ * @plane: backpointer to the plane
+ * @crtc: currently bound CRTC, NULL if disabled
+ * @fb: currently bound framebuffer
+ * @fence: optional fence to wait for before scanning out @fb
+ * @crtc_x: left position of visible portion of plane on crtc
+ * @crtc_y: upper position of visible portion of plane on crtc
+ * @crtc_w: width of visible portion of plane on crtc
+ * @crtc_h: height of visible portion of plane on crtc
+ * @src_x: left position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_y: upper position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_w: width of visible portion of plane (in 16.16)
+ * @src_h: height of visible portion of plane (in 16.16)
+ * @rotation: rotation of the plane
+ * @zpos: priority of the given plane on crtc (optional)
+ * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1
+ * where N is the number of active planes for given crtc
+ * @src: clipped source coordinates of the plane (in 16.16)
+ * @dst: clipped destination coordinates of the plane
+ * @visible: visibility of the plane
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_plane_state {
+ struct drm_plane *plane;
+
+ struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */
+ struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */
+ struct fence *fence;
+
+ /* Signed dest location allows it to be partially off screen */
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w, crtc_h;
+
+ /* Source values are 16.16 fixed point */
+ uint32_t src_x, src_y;
+ uint32_t src_h, src_w;
+
+ /* Plane rotation */
+ unsigned int rotation;
+
+ /* Plane zpos */
+ unsigned int zpos;
+ unsigned int normalized_zpos;
+
+ /* Clipped coordinates */
+ struct drm_rect src, dst;
+
+ /*
+ * Is the plane actually visible? Can be false even
+ * if fb!=NULL and crtc!=NULL, due to clipping.
+ */
+ bool visible;
+
+ struct drm_atomic_state *state;
+};
+
+
+/**
+ * struct drm_plane_funcs - driver plane control functions
+ */
+struct drm_plane_funcs {
+ /**
+ * @update_plane:
+ *
+ * This is the legacy entry point to enable and configure the plane for
+ * the given CRTC and framebuffer. It is never called to disable the
+ * plane, i.e. the passed-in crtc and fb paramters are never NULL.
+ *
+ * The source rectangle in frame buffer memory coordinates is given by
+ * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
+ * values). Devices that don't support subpixel plane coordinates can
+ * ignore the fractional part.
+ *
+ * The destination rectangle in CRTC coordinates is given by the
+ * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
+ * Devices scale the source rectangle to the destination rectangle. If
+ * scaling is not supported, and the source rectangle size doesn't match
+ * the destination rectangle size, the driver must return a
+ * -<errorname>EINVAL</errorname> error.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_update_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*update_plane)(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h);
+
+ /**
+ * @disable_plane:
+ *
+ * This is the legacy entry point to disable the plane. The DRM core
+ * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
+ * with the frame buffer ID set to 0. Disabled planes must not be
+ * processed by the CRTC.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_disable_plane() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*disable_plane)(struct drm_plane *plane);
+
+ /**
+ * @destroy:
+ *
+ * Clean up plane resources. This is only called at driver unload time
+ * through drm_mode_config_cleanup() since a plane cannot be hotplugged
+ * in DRM.
+ */
+ void (*destroy)(struct drm_plane *plane);
+
+ /**
+ * @reset:
+ *
+ * Reset plane hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
+ * atomic state using this hook.
+ */
+ void (*reset)(struct drm_plane *plane);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * plane.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_plane_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_property)(struct drm_plane *plane,
+ struct drm_property *property, uint64_t val);
+
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this plane and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_plane_state should use
+ * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before plane->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
+ struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
+ void (*atomic_destroy_state)(struct drm_plane *plane,
+ struct drm_plane_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this plane). No other validation is
+ * allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
+ int (*atomic_set_property)(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETPLANE IOCTL.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_plane_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which should never happen, the core only asks for
+ * properties attached to this plane).
+ */
+ int (*atomic_get_property)(struct drm_plane *plane,
+ const struct drm_plane_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+ /**
+ * @late_register:
+ *
+ * This optional hook can be used to register additional userspace
+ * interfaces attached to the plane like debugfs interfaces.
+ * It is called late in the driver load sequence from drm_dev_register().
+ * Everything added from this callback should be unregistered in
+ * the early_unregister callback.
+ *
+ * Returns:
+ *
+ * 0 on success, or a negative error code on failure.
+ */
+ int (*late_register)(struct drm_plane *plane);
+
+ /**
+ * @early_unregister:
+ *
+ * This optional hook should be used to unregister the additional
+ * userspace interfaces attached to the plane from
+ * late_unregister(). It is called from drm_dev_unregister(),
+ * early in the driver unload sequence to disable userspace access
+ * before data structures are torndown.
+ */
+ void (*early_unregister)(struct drm_plane *plane);
+};
+
+enum drm_plane_type {
+ DRM_PLANE_TYPE_OVERLAY,
+ DRM_PLANE_TYPE_PRIMARY,
+ DRM_PLANE_TYPE_CURSOR,
+};
+
+
+/**
+ * struct drm_plane - central DRM plane control structure
+ * @dev: DRM device this plane belongs to
+ * @head: for list management
+ * @name: human readable name, can be overwritten by the driver
+ * @base: base mode object
+ * @possible_crtcs: pipes this plane can be bound to
+ * @format_types: array of formats supported by this plane
+ * @format_count: number of formats supported
+ * @format_default: driver hasn't supplied supported formats for the plane
+ * @crtc: currently bound CRTC
+ * @fb: currently bound fb
+ * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
+ * drm_mode_set_config_internal() to implement correct refcounting.
+ * @funcs: helper functions
+ * @properties: property tracking for this plane
+ * @type: type of plane (overlay, primary, cursor)
+ * @state: current atomic state for this plane
+ * @zpos_property: zpos property for this plane
+ * @helper_private: mid-layer private data
+ */
+struct drm_plane {
+ struct drm_device *dev;
+ struct list_head head;
+
+ char *name;
+
+ /**
+ * @mutex:
+ *
+ * Protects modeset plane state, together with the mutex of &drm_crtc
+ * this plane is linked to (when active, getting actived or getting
+ * disabled).
+ */
+ struct drm_modeset_lock mutex;
+
+ struct drm_mode_object base;
+
+ uint32_t possible_crtcs;
+ uint32_t *format_types;
+ unsigned int format_count;
+ bool format_default;
+
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb;
+
+ struct drm_framebuffer *old_fb;
+
+ const struct drm_plane_funcs *funcs;
+
+ struct drm_object_properties properties;
+
+ enum drm_plane_type type;
+
+ /**
+ * @index: Position inside the mode_config.list, can be used as an array
+ * index. It is invariant over the lifetime of the plane.
+ */
+ unsigned index;
+
+ const struct drm_plane_helper_funcs *helper_private;
+
+ struct drm_plane_state *state;
+
+ struct drm_property *zpos_property;
+};
+
+#define obj_to_plane(x) container_of(x, struct drm_plane, base)
+
+extern __printf(8, 9)
+int drm_universal_plane_init(struct drm_device *dev,
+ struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats,
+ unsigned int format_count,
+ enum drm_plane_type type,
+ const char *name, ...);
+extern int drm_plane_init(struct drm_device *dev,
+ struct drm_plane *plane,
+ unsigned long possible_crtcs,
+ const struct drm_plane_funcs *funcs,
+ const uint32_t *formats, unsigned int format_count,
+ bool is_primary);
+extern void drm_plane_cleanup(struct drm_plane *plane);
+
+/**
+ * drm_plane_index - find the index of a registered plane
+ * @plane: plane to find index for
+ *
+ * Given a registered plane, return the index of that plane within a DRM
+ * device's list of planes.
+ */
+static inline unsigned int drm_plane_index(struct drm_plane *plane)
+{
+ return plane->index;
+}
+extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
+extern void drm_plane_force_disable(struct drm_plane *plane);
+
+int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
+ struct drm_property *property,
+ uint64_t value);
+
+/**
+ * drm_plane_find - find a &drm_plane
+ * @dev: DRM device
+ * @id: plane id
+ *
+ * Returns the plane with @id, NULL if it doesn't exist. Simple wrapper around
+ * drm_mode_object_find().
+ */
+static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
+ uint32_t id)
+{
+ struct drm_mode_object *mo;
+ mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PLANE);
+ return mo ? obj_to_plane(mo) : NULL;
+}
+
+/**
+ * drm_for_each_plane_mask - iterate over planes specified by bitmask
+ * @plane: the loop cursor
+ * @dev: the DRM device
+ * @plane_mask: bitmask of plane indices
+ *
+ * Iterate over all planes specified by bitmask.
+ */
+#define drm_for_each_plane_mask(plane, dev, plane_mask) \
+ list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
+ for_each_if ((plane_mask) & (1 << drm_plane_index(plane)))
+
+/* Plane list iterator for legacy (overlay only) planes. */
+#define drm_for_each_legacy_plane(plane, dev) \
+ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
+ for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+
+#define drm_for_each_plane(plane, dev) \
+ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
+
+
+#endif
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
