On Mon, Aug 15, 2016 at 05:00:53PM -0700, Dhinakaran Pandiyan wrote:
> There are places in the driver where we just need the 'port' associated
> with an encoder and not 'struct intel_digital_port' that contains it.
> This basically is a generic implementation of intel_ddi_get_encoder_port()
> handling both DDI and Non-DDI encoders. The handling of the analog encoder
> is delegated to the DDI specific function.
>
> The idea to have a generic implementation that returned the 'enum port'
> from 'struct intel_encoder' came from Ville.
>
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 42 ++++++++++-------------------------
> drivers/gpu/drm/i915/intel_display.c | 18 +++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 8 ++++++-
> drivers/gpu/drm/i915/intel_opregion.c | 2 +-
> 4 files changed, 38 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index c2df4e4..13ceef4 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -301,24 +301,6 @@ static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = {
> { 154, 0x9A, 1, 128, true }, /* 9: 1200 0 */
> };
>
> -enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder)
> -{
> - switch (encoder->type) {
> - case INTEL_OUTPUT_DP_MST:
> - return enc_to_mst(&encoder->base)->primary->port;
> - case INTEL_OUTPUT_DP:
> - case INTEL_OUTPUT_EDP:
> - case INTEL_OUTPUT_HDMI:
> - case INTEL_OUTPUT_UNKNOWN:
> - return enc_to_dig_port(&encoder->base)->port;
> - case INTEL_OUTPUT_ANALOG:
> - return PORT_E;
> - default:
> - MISSING_CASE(encoder->type);
> - return PORT_A;
> - }
> -}
> -
> static const struct ddi_buf_trans *
> bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
> {
> @@ -421,7 +403,7 @@ void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder)
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> u32 iboost_bit = 0;
> int i, n_dp_entries, n_edp_entries, size;
> - enum port port = intel_ddi_get_encoder_port(encoder);
> + enum port port = intel_get_encoder_port(encoder);
> const struct ddi_buf_trans *ddi_translations_fdi;
> const struct ddi_buf_trans *ddi_translations_dp;
> const struct ddi_buf_trans *ddi_translations_edp;
> @@ -499,7 +481,7 @@ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder)
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> u32 iboost_bit = 0;
> int n_hdmi_entries, hdmi_level;
> - enum port port = intel_ddi_get_encoder_port(encoder);
> + enum port port = intel_get_encoder_port(encoder);
> const struct ddi_buf_trans *ddi_translations_hdmi;
>
> if (IS_BROXTON(dev_priv))
> @@ -987,7 +969,7 @@ static void bxt_ddi_clock_get(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> - enum port port = intel_ddi_get_encoder_port(encoder);
> + enum port port = intel_get_encoder_port(encoder);
> uint32_t dpll = port;
>
> pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll);
> @@ -1130,7 +1112,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
> struct drm_i915_private *dev_priv = to_i915(dev);
> enum pipe pipe = intel_crtc->pipe;
> enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> int type = intel_encoder->type;
> uint32_t temp;
>
> @@ -1226,7 +1208,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_encoder *intel_encoder = intel_connector->encoder;
> int type = intel_connector->base.connector_type;
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> enum pipe pipe = 0;
> enum transcoder cpu_transcoder;
> enum intel_display_power_domain power_domain;
> @@ -1286,7 +1268,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
> {
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum port port = intel_ddi_get_encoder_port(encoder);
> + enum port port = intel_get_encoder_port(encoder);
> enum intel_display_power_domain power_domain;
> u32 tmp;
> int i;
> @@ -1361,7 +1343,7 @@ void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc)
> struct drm_device *dev = crtc->dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
>
> if (cpu_transcoder != TRANSCODER_EDP)
> @@ -1589,7 +1571,7 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> - enum port port = intel_ddi_get_encoder_port(encoder);
> + enum port port = intel_get_encoder_port(encoder);
>
> if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
> uint32_t dpll = pipe_config->ddi_pll_sel;
> @@ -1616,7 +1598,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
> struct drm_encoder *encoder = &intel_encoder->base;
> struct drm_i915_private *dev_priv = to_i915(encoder->dev);
> struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> int type = intel_encoder->type;
>
> if (type == INTEL_OUTPUT_HDMI) {
> @@ -1668,7 +1650,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
> struct drm_encoder *encoder = &intel_encoder->base;
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> int type = intel_encoder->type;
> uint32_t val;
> bool wait = false;
> @@ -1715,7 +1697,7 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum port port = intel_ddi_get_encoder_port(intel_encoder);
> + enum port port = intel_get_encoder_port(intel_encoder);
> int type = intel_encoder->type;
>
> if (type == INTEL_OUTPUT_HDMI) {
> @@ -2276,7 +2258,7 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder,
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> int type = encoder->type;
> - int port = intel_ddi_get_encoder_port(encoder);
> + int port = intel_get_encoder_port(encoder);
> int ret;
>
> WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9cbf543..44d20bd 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -16277,6 +16277,24 @@ err:
> return ret;
> }
>
> +enum port intel_get_encoder_port(struct intel_encoder *encoder)
> +{
> + switch (encoder->type) {
> + case INTEL_OUTPUT_DP_MST:
> + return enc_to_mst(&encoder->base)->primary->port;
> + case INTEL_OUTPUT_DP:
> + case INTEL_OUTPUT_EDP:
> + case INTEL_OUTPUT_HDMI:
> + case INTEL_OUTPUT_UNKNOWN:
> + return enc_to_dig_port(&encoder->base)->port;
> + case INTEL_OUTPUT_ANALOG:
> + return intel_ddi_get_analog_port();
> + default:
> + MISSING_CASE(encoder->type);
> + return PORT_A;
> + }
> +}
I don't see the difference here. For me this patch looks more a rename and
re-positioning than a change on the enum port x intel_digital_port as advertised.
What am I missing?
> +
> void intel_connector_unregister(struct drm_connector *connector)
> {
> struct intel_connector *intel_connector = to_intel_connector(connector);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index b1fc67e..19aab7b 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1111,7 +1111,12 @@ void intel_ddi_clk_select(struct intel_encoder *encoder,
> void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder);
> void hsw_fdi_link_train(struct drm_crtc *crtc);
> void intel_ddi_init(struct drm_device *dev, enum port port);
> -enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
> +
> +static inline enum port intel_ddi_get_analog_port(void)
> +{
> + return PORT_A;
PORT_E?
Anyway unless this is used in more places I think I prefer the old way.
> +}
> +
> bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
> void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc);
> void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
> @@ -1189,6 +1194,7 @@ intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state)
> (1 << INTEL_OUTPUT_DP_MST) |
> (1 << INTEL_OUTPUT_EDP));
> }
> +enum port intel_get_encoder_port(struct intel_encoder *encoder);
> static inline void
> intel_wait_for_vblank(struct drm_device *dev, int pipe)
> {
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
> index adca262..9c0043e 100644
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/intel_opregion.c
> @@ -366,7 +366,7 @@ int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
> if (intel_encoder->type == INTEL_OUTPUT_DSI)
> port = 0;
> else
> - port = intel_ddi_get_encoder_port(intel_encoder);
> + port = intel_get_encoder_port(intel_encoder);
>
> if (port == PORT_E) {
> port = 0;
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
