On Tue, Aug 09, 2016 at 05:04:12PM +0200, Maarten Lankhorst wrote:
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dp_mst.c | 48 ++++++++++++++-----------------------
> 1 file changed, 18 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 1fb741a02813..b2f0ef5db64b 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -82,11 +82,13 @@ static void intel_mst_disable_dp(struct intel_encoder *encoder,
> struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
> struct intel_digital_port *intel_dig_port = intel_mst->primary;
> struct intel_dp *intel_dp = &intel_dig_port->dp;
> + struct intel_connector *connector =
> + to_intel_connector(old_conn_state->connector);
> int ret;
>
> DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
>
> - drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, intel_mst->connector->port);
> + drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
>
> ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
> if (ret) {
> @@ -101,6 +103,8 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
> struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
> struct intel_digital_port *intel_dig_port = intel_mst->primary;
> struct intel_dp *intel_dp = &intel_dig_port->dp;
> + struct intel_connector *connector =
> + to_intel_connector(old_conn_state->connector);
>
> DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
>
> @@ -109,7 +113,7 @@ static void intel_mst_post_disable_dp(struct intel_encoder *encoder,
> /* and this can also fail */
> drm_dp_update_payload_part2(&intel_dp->mst_mgr);
>
> - drm_dp_mst_deallocate_vcpi(&intel_dp->mst_mgr, intel_mst->connector->port);
> + drm_dp_mst_deallocate_vcpi(&intel_dp->mst_mgr, connector->port);
>
> intel_dp->active_mst_links--;
>
> @@ -129,43 +133,29 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
> struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
> struct intel_digital_port *intel_dig_port = intel_mst->primary;
> struct intel_dp *intel_dp = &intel_dig_port->dp;
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> enum port port = intel_dig_port->port;
> + struct intel_connector *connector =
> + to_intel_connector(conn_state->connector);
> int ret;
> uint32_t temp;
> - struct intel_connector *found = NULL, *connector;
> int slots;
> - struct drm_crtc *crtc = encoder->base.crtc;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> -
> - for_each_intel_connector(dev, connector) {
> - if (connector->base.state->best_encoder == &encoder->base) {
> - found = connector;
> - break;
> - }
> - }
> -
> - if (!found) {
> - DRM_ERROR("can't find connector\n");
> - return;
> - }
>
> /* MST encoders are bound to a crtc, not to a connector,
> * force the mapping here for get_hw_state.
> */
> - found->encoder = encoder;
> + connector->encoder = encoder;
>
> DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
>
> - intel_mst->connector = found;
> + intel_mst->connector = connector;
The intel_mst->connector link is also only needed for get_hw_state. Would
be good to move them together. Same with the clearing in post_disable,
which is also missing the clearing of intel_connector->encoder. Follow-up
patch perhaps.
With that bikeshed addressed:
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
>
> if (intel_dp->active_mst_links == 0) {
> - intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
> + intel_ddi_clk_select(&intel_dig_port->base, pipe_config);
>
> intel_prepare_dp_ddi_buffers(&intel_dig_port->base);
>
> - intel_dp_set_link_params(intel_dp, intel_crtc->config);
> + intel_dp_set_link_params(intel_dp, pipe_config);
>
> intel_ddi_init_dp_buf_reg(&intel_dig_port->base);
>
> @@ -176,8 +166,8 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder,
> }
>
> ret = drm_dp_mst_allocate_vcpi(&intel_dp->mst_mgr,
> - intel_mst->connector->port,
> - intel_crtc->config->pbn, &slots);
> + connector->port,
> + pipe_config->pbn, &slots);
> if (ret == false) {
> DRM_ERROR("failed to allocate vcpi\n");
> return;
> @@ -198,8 +188,7 @@ static void intel_mst_enable_dp(struct intel_encoder *encoder,
> struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
> struct intel_digital_port *intel_dig_port = intel_mst->primary;
> struct intel_dp *intel_dp = &intel_dig_port->dp;
> - struct drm_device *dev = intel_dig_port->base.base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> enum port port = intel_dig_port->port;
> int ret;
>
> @@ -232,9 +221,8 @@ static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder,
> {
> struct intel_dp_mst_encoder *intel_mst = enc_to_mst(&encoder->base);
> struct intel_digital_port *intel_dig_port = intel_mst->primary;
> - struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> u32 temp, flags = 0;
>
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
