Re: [PATCH v3] drm/i915/dp: DP audio API changes for MST

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2016-08-12 at 08:18 +0300, Ville Syrjälä wrote:
> On Fri, Aug 12, 2016 at 04:28:09AM +0000, Pandiyan, Dhinakaran wrote:
> > On Thu, 2016-08-11 at 10:39 +0300, Ville Syrjälä wrote:
> > > On Thu, Aug 11, 2016 at 07:10:39AM +0000, Pandiyan, Dhinakaran wrote:
> > > > On Thu, 2016-08-11 at 09:26 +0300, Ville Syrjälä wrote:
> > > > > On Wed, Aug 10, 2016 at 12:41:57PM -0700, Dhinakaran Pandiyan wrote:
> > > > > > DP MST provides the capability to send multiple video and audio streams
> > > > > > through a single port. This requires the API's between i915 and audio
> > > > > > drivers to distinguish between multiple audio capable displays that can be
> > > > > > connected to a port. Currently only the port identity is shared in the
> > > > > > APIs. This patch adds support for MST with an additional parameter
> > > > > > 'int pipe'.  The existing parameter 'port' does not change it's meaning.
> > > > > > 
> > > > > > pipe =
> > > > > > 	MST	: display pipe that the stream originates from
> > > > > > 	Non-MST	: -1
> > > > > > 
> > > > > > Affected APIs:
> > > > > > struct i915_audio_component_ops
> > > > > > -       int (*sync_audio_rate)(struct device *, int port, int rate);
> > > > > > +	int (*sync_audio_rate)(struct device *, int port, int pipe,
> > > > > > +	     int rate);
> > > > > > 
> > > > > > -       int (*get_eld)(struct device *, int port, bool *enabled,
> > > > > > -                       unsigned char *buf, int max_bytes);
> > > > > > +       int (*get_eld)(struct device *, int port, int pipe,
> > > > > > +		       bool *enabled, unsigned char *buf, int max_bytes);
> > > > > > 
> > > > > > struct i915_audio_component_audio_ops
> > > > > > -       void (*pin_eld_notify)(void *audio_ptr, int port);
> > > > > > +       void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
> > > > > > 
> > > > > > This patch makes dummy changes in the audio drivers (Libin) for build to
> > > > > > succeed. The audio side drivers will send the right 'pipe' values in
> > > > > > patches that will follow.
> > > > > > 
> > > > > > v2:
> > > > > > Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
> > > > > > Included Asoc driver API compatibility changes from Jeeja.
> > > > > > Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
> > > > > > Added comment for av_enc_map[] definition. (Takashi)
> > > > > > 
> > > > > > v3:
> > > > > > Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
> > > > > > Renamed get_saved_encoder() to get_saved_enc() to reduce line length
> > > > > > 
> > > > > > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > > > > ---
> > > > > >  drivers/gpu/drm/i915/i915_drv.h    |  3 +-
> > > > > >  drivers/gpu/drm/i915/intel_audio.c | 93 ++++++++++++++++++++++++++------------
> > > > > >  include/drm/i915_component.h       |  6 +--
> > > > > >  include/sound/hda_i915.h           | 11 +++--
> > > > > >  sound/hda/hdac_i915.c              |  9 ++--
> > > > > >  sound/pci/hda/patch_hdmi.c         |  7 +--
> > > > > >  sound/soc/codecs/hdac_hdmi.c       |  2 +-
> > > > > >  7 files changed, 86 insertions(+), 45 deletions(-)
> > > > > > 
> > > > > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > > > > index c36d176..8e4a88f 100644
> > > > > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > > > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > > > > @@ -2036,7 +2036,8 @@ struct drm_i915_private {
> > > > > >  	/* perform PHY state sanity checks? */
> > > > > >  	bool chv_phy_assert[2];
> > > > > >  
> > > > > > -	struct intel_encoder *dig_port_map[I915_MAX_PORTS];
> > > > > > +	/* Used to save the pipe-to-encoder mapping for audio */
> > > > > > +	struct intel_encoder *av_enc_map[I915_MAX_PIPES];
> > > > > >  
> > > > > >  	/*
> > > > > >  	 * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> > > > > > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > > > > > index ef20875..a7467ea 100644
> > > > > > --- a/drivers/gpu/drm/i915/intel_audio.c
> > > > > > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > > > > > @@ -500,6 +500,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> > > > > >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> > > > > >  	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
> > > > > >  	enum port port = intel_dig_port->port;
> > > > > > +	enum pipe pipe = crtc->pipe;
> > > > > >  
> > > > > >  	connector = drm_select_eld(encoder);
> > > > > >  	if (!connector)
> > > > > > @@ -524,12 +525,18 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> > > > > >  
> > > > > >  	mutex_lock(&dev_priv->av_mutex);
> > > > > >  	intel_encoder->audio_connector = connector;
> > > > > > +
> > > > > >  	/* referred in audio callbacks */
> > > > > > -	dev_priv->dig_port_map[port] = intel_encoder;
> > > > > > +	dev_priv->av_enc_map[pipe] = intel_encoder;
> > > > > >  	mutex_unlock(&dev_priv->av_mutex);
> > > > > >  
> > > > > > +	/* audio drivers expect pipe = -1 to indicate Non-MST cases */
> > > > > > +	if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
> > > > > > +		pipe = -1;
> > > > > > +
> > > > > >  	if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
> > > > > > -		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
> > > > > > +		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
> > > > > > +						 (int) port, (int) pipe);
> > > > > >  }
> > > > > >  
> > > > > >  /**
> > > > > > @@ -542,22 +549,29 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> > > > > >  void intel_audio_codec_disable(struct intel_encoder *intel_encoder)
> > > > > >  {
> > > > > >  	struct drm_encoder *encoder = &intel_encoder->base;
> > > > > > +	struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> > > > > >  	struct drm_device *dev = encoder->dev;
> > > > > >  	struct drm_i915_private *dev_priv = to_i915(dev);
> > > > > >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> > > > > >  	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
> > > > > >  	enum port port = intel_dig_port->port;
> > > > > > +	enum pipe pipe = crtc->pipe;
> > > > > >  
> > > > > >  	if (dev_priv->display.audio_codec_disable)
> > > > > >  		dev_priv->display.audio_codec_disable(intel_encoder);
> > > > > >  
> > > > > >  	mutex_lock(&dev_priv->av_mutex);
> > > > > >  	intel_encoder->audio_connector = NULL;
> > > > > > -	dev_priv->dig_port_map[port] = NULL;
> > > > > > +	dev_priv->av_enc_map[pipe] = NULL;
> > > > > >  	mutex_unlock(&dev_priv->av_mutex);
> > > > > >  
> > > > > > +	/* audio drivers expect pipe = -1 to indicate Non-MST cases */
> > > > > > +	if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
> > > > > > +		pipe = -1;
> > > > > > +
> > > > > >  	if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
> > > > > > -		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
> > > > > > +		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
> > > > > > +						 (int) port, (int) pipe);
> > > > > >  }
> > > > > >  
> > > > > >  /**
> > > > > > @@ -632,15 +646,39 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev)
> > > > > >  	return dev_priv->cdclk_freq;
> > > > > >  }
> > > > > >  
> > > > > > -static int i915_audio_component_sync_audio_rate(struct device *dev,
> > > > > > -						int port, int rate)
> > > > > > +static struct intel_encoder *get_saved_enc(struct intel_encoder *av_enc_map[],
> > > > > > +					       int port, int pipe)
> > > > > > +{
> > > > > > +	struct drm_encoder *encoder;
> > > > > > +
> > > > > > +	if (WARN_ON(pipe >= I915_MAX_PIPES))
> > > > > > +		return NULL;
> > > > > > +
> > > > > > +	/* MST */
> > > > > > +	if (pipe != -1)
> > > > > 
> > > > > I'd make that < 0
> > > > > 
> > > > Thanks for reviewing.
> > > > Do you mean this? - handle the non-MST branch first with 
> > > > 
> > > > if (pipe < 0){ 
> > > > 	for_each_pipe(){
> > > > 
> > > > 		...
> > > > 	}
> > > > }
> > > > else 
> > > > 	return av_enc_map[pipe];
> > > 
> > > Sorry, no. I like your current code structure, so what I really meant
> > > was 'pipe >= 0', so:
> > > 
> > > if (pipe >= 0)
> > > 	return ...
> > > 
> > > for_each_pipe()
> > > 	...
> > > 	
> > > 
> > 
> > I'll make this change.
> > 
> > > > 
> > > > > > +		return av_enc_map[pipe];
> > > > > > +
> > > > > > +	/* Non-MST */
> > > > > > +	for (pipe = PIPE_A; pipe < I915_MAX_PIPES; pipe++) {
> > > > > 
> > > > > for_each_pipe() would be nicer.
> > > > > 
> > > > > > +		if (!av_enc_map[pipe])
> > > > > > +			continue;
> > > > > > +
> > > > > > +		encoder = &av_enc_map[pipe]->base;
> > > > > > +		if (port == enc_to_dig_port(encoder)->port)
> > > > > > +			return av_enc_map[pipe];
> > > > > > +	}
> > > > > > +
> > > > > > +	return NULL;
> > > > > > +}
> > > > > > +
> > > > > > +static int i915_audio_component_sync_audio_rate(struct device *dev, int port,
> > > > > > +						int pipe, int rate)
> > > > > >  {
> > > > > >  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > > > > >  	struct intel_encoder *intel_encoder;
> > > > > >  	struct intel_crtc *crtc;
> > > > > >  	struct drm_display_mode *mode;
> > > > > >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> > > > > > -	enum pipe pipe = INVALID_PIPE;
> > > > > >  	u32 tmp;
> > > > > >  	int n;
> > > > > >  	int err = 0;
> > > > > > @@ -654,25 +692,20 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> > > > > >  
> > > > > >  	i915_audio_component_get_power(dev);
> > > > > >  	mutex_lock(&dev_priv->av_mutex);
> > > > > > +
> > > > > >  	/* 1. get the pipe */
> > > > > > -	intel_encoder = dev_priv->dig_port_map[port];
> > > > > > -	/* intel_encoder might be NULL for DP MST */
> > > > > > +	intel_encoder = get_saved_enc(dev_priv->av_enc_map, port, pipe);
> > > > > >  	if (!intel_encoder || !intel_encoder->base.crtc ||
> > > > > >  	    intel_encoder->type != INTEL_OUTPUT_HDMI) {
> > > > > 
> > > > > Did we have a followup planned to deal with MST here? I know there's
> > > > > that SST M/N patch floating around, but I think we'll want it for MST
> > > > > too.
> > > > > 
> > > > Looks like Libin Yang is working on the DP patch, I will check with him.
> > > > 
> > > > > > -		DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
> > > > > > +		DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
> > > > > >  		err = -ENODEV;
> > > > > >  		goto unlock;
> > > > > >  	}
> > > > > > +
> > > > > > +	/* pipe passed from the audio driver will be -1 for Non-MST case */
> > > > > >  	crtc = to_intel_crtc(intel_encoder->base.crtc);
> > > > > >  	pipe = crtc->pipe;
> > > > > > -	if (pipe == INVALID_PIPE) {
> > > > > > -		DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
> > > > > > -		err = -ENODEV;
> > > > > > -		goto unlock;
> > > > > > -	}
> > > > > >  
> > > > > > -	DRM_DEBUG_KMS("pipe %c connects port %c\n",
> > > > > > -				  pipe_name(pipe), port_name(port));
> > > > > >  	mode = &crtc->config->base.adjusted_mode;
> > > > > >  
> > > > > >  	/* port must be valid now, otherwise the pipe will be invalid */
> > > > > > @@ -708,7 +741,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> > > > > >  }
> > > > > >  
> > > > > >  static int i915_audio_component_get_eld(struct device *dev, int port,
> > > > > > -					bool *enabled,
> > > > > > +					int pipe, bool *enabled,
> > > > > >  					unsigned char *buf, int max_bytes)
> > > > > >  {
> > > > > >  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > > > > > @@ -717,16 +750,20 @@ static int i915_audio_component_get_eld(struct device *dev, int port,
> > > > > >  	int ret = -EINVAL;
> > > > > >  
> > > > > >  	mutex_lock(&dev_priv->av_mutex);
> > > > > > -	intel_encoder = dev_priv->dig_port_map[port];
> > > > > > -	/* intel_encoder might be NULL for DP MST */
> > > > > > -	if (intel_encoder) {
> > > > > > -		ret = 0;
> > > > > > -		*enabled = intel_encoder->audio_connector != NULL;
> > > > > > -		if (*enabled) {
> > > > > > -			eld = intel_encoder->audio_connector->eld;
> > > > > > -			ret = drm_eld_size(eld);
> > > > > > -			memcpy(buf, eld, min(max_bytes, ret));
> > > > > > -		}
> > > > > > +
> > > > > > +	intel_encoder = get_saved_enc(dev_priv->av_enc_map, port, pipe);
> > > > > > +	if (!intel_encoder) {
> > > > > > +		DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
> > > > > 
> > > > > Print the pipe name too, if we have a valid pipe?
> > > > > 
> > > > > > +		mutex_unlock(&dev_priv->av_mutex);
> > > > > > +		return ret;
> > > > > > +	}
> > > > > > +
> > > > > > +	ret = 0;
> > > > > > +	*enabled = intel_encoder->audio_connector != NULL;
> > > > > > +	if (*enabled) {
> > > > > > +		eld = intel_encoder->audio_connector->eld;
> > > > > > +		ret = drm_eld_size(eld);
> > > > > > +		memcpy(buf, eld, min(max_bytes, ret));
> > > > > >  	}
> > > > > >  
> > > > > >  	mutex_unlock(&dev_priv->av_mutex);
> > > > > > diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
> > > > > > index b46fa0e..545c6e0 100644
> > > > > > --- a/include/drm/i915_component.h
> > > > > > +++ b/include/drm/i915_component.h
> > > > > > @@ -64,7 +64,7 @@ struct i915_audio_component_ops {
> > > > > >  	 * Called from audio driver. After audio driver sets the
> > > > > >  	 * sample rate, it will call this function to set n/cts
> > > > > >  	 */
> > > > > > -	int (*sync_audio_rate)(struct device *, int port, int rate);
> > > > > > +	int (*sync_audio_rate)(struct device *, int port, int pipe, int rate);
> > > > > >  	/**
> > > > > >  	 * @get_eld: fill the audio state and ELD bytes for the given port
> > > > > >  	 *
> > > > > > @@ -77,7 +77,7 @@ struct i915_audio_component_ops {
> > > > > >  	 * Note that the returned size may be over @max_bytes.  Then it
> > > > > >  	 * implies that only a part of ELD has been copied to the buffer.
> > > > > >  	 */
> > > > > > -	int (*get_eld)(struct device *, int port, bool *enabled,
> > > > > > +	int (*get_eld)(struct device *, int port, int pipe, bool *enabled,
> > > > > >  		       unsigned char *buf, int max_bytes);
> > > > > >  };
> > > > > >  
> > > > > > @@ -97,7 +97,7 @@ struct i915_audio_component_audio_ops {
> > > > > >  	 * status accordingly (even when the HDA controller is in power save
> > > > > >  	 * mode).
> > > > > >  	 */
> > > > > > -	void (*pin_eld_notify)(void *audio_ptr, int port);
> > > > > > +	void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
> > > > > >  };
> > > > > >  
> > > > > >  /**
> > > > > > diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h
> > > > > > index 796cabf..07fd64e 100644
> > > > > > --- a/include/sound/hda_i915.h
> > > > > > +++ b/include/sound/hda_i915.h
> > > > > > @@ -10,8 +10,9 @@
> > > > > >  int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
> > > > > >  int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
> > > > > >  void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
> > > > > > -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate);
> > > > > > -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > > > > > +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
> > > > > > +			     int pipe, int rate);
> > > > > > +int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int pipe,
> > > > > >  			   bool *audio_enabled, char *buffer, int max_bytes);
> > > > > >  int snd_hdac_i915_init(struct hdac_bus *bus);
> > > > > >  int snd_hdac_i915_exit(struct hdac_bus *bus);
> > > > > > @@ -29,13 +30,13 @@ static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
> > > > > >  {
> > > > > >  }
> > > > > >  static inline int snd_hdac_sync_audio_rate(struct hdac_device *codec,
> > > > > > -					   hda_nid_t nid, int rate)
> > > > > > +					   hda_nid_t nid, int pipe, int rate)
> > > > > >  {
> > > > > >  	return 0;
> > > > > >  }
> > > > > >  static inline int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > > > > > -					 bool *audio_enabled, char *buffer,
> > > > > > -					 int max_bytes)
> > > > > > +					 int pipe, bool *audio_enabled,
> > > > > > +					 char *buffer, int max_bytes)
> > > > > >  {
> > > > > >  	return -ENODEV;
> > > > > >  }
> > > > > > diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c
> > > > > > index c9af022..b99994b 100644
> > > > > > --- a/sound/hda/hdac_i915.c
> > > > > > +++ b/sound/hda/hdac_i915.c
> > > > > > @@ -201,7 +201,8 @@ static int pin2port(struct hdac_device *codec, hda_nid_t pin_nid)
> > > > > >   * This function sets N/CTS value based on the given sample rate.
> > > > > >   * Returns zero for success, or a negative error code.
> > > > > >   */
> > > > > > -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
> > > > > > +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
> > > > > > +			     int pipe, int rate)
> > > > > 
> > > > > I thought you'd still want to call it 'dev_id' on the hda side, and just
> > > > > do the dev_id->pipe conversion here next to the pin->port conversion?
> > > > > Just figured that would be less confusing for people who are just familiar
> > > > > with hda and not i915.
> > > > > 
> > > > Yeah, that makes sense. 
> > > > 
> > > > > Anyways, the patch looks pretty good to me from the i915 POV. Whether
> > > > > you want to do those small changes I proposed is up to you, and either
> > > > > way the i915 parts are
> > > > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > 
> > > > 
> > > > I have assumed enc_to_dig_port() works for MST encoders. Do you think
> > > > it's good idea to have this
> > > > https://lists.freedesktop.org/archives/intel-gfx/2016-August/102994.html
> > > > now?
> > > 
> > > Oh I forgot about that part. I'm not really excited about that patch.
> > > I'd prefer that people have to think a bit when dealing with MST
> > > encoders, otherwise they might assume they work just like any other
> > > encoder.
> > > 
> > > So I'd prefer that you explicitly handle the MST case when looking up
> > > the encoder. For your audio use case, I think you just need the 'port'
> > > information from the dig_port, no? I think making that part generic isn't
> > > a huge problem since that way at least you're not getting your hands
> > >  on a dig_port structure that you don't really own.
> > > 
> > > So you could almost use intel_ddi_get_encoder_port(), except using a
> > > DDI specific function in generic code isn't very nice. We could extract
> > > the generic part to a separate function, like so:
> > > 
> > > enum port intel_encoder_get_port(struct intel_encoder *encoder)
> > > {
> > >         switch (encoder->type) {
> > >         case INTEL_OUTPUT_DP_MST:
> > >                 return enc_to_mst(&encoder->base)->primary->port;
> > >         case INTEL_OUTPUT_DP:
> > >         case INTEL_OUTPUT_EDP:
> > >         case INTEL_OUTPUT_HDMI:
> > >         case INTEL_OUTPUT_UNKNOWN:
> > >                 return enc_to_dig_port(&encoder->base)->port;
> > >         default:
> > >                 MISSING_CASE(encoder->type);
> > >                 return PORT_A;
> > >         }
> > > }
> > > 
> > > enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder)
> > > {
> > >         switch (encoder->type) {
> > >         case INTEL_OUTPUT_ANALOG:
> > > 		return PORT_E;
> > >         default:
> > > 		return intel_encoder_get_port(encoder);
> > >         }
> > > }
> > 
> > 
> > I like the idea of not passing the pointer to intel_dig_port. But, the
> > generic naming of intel_encoder_get_port() sounds like it should handle
> > DDI and Non-DDI platforms. Can we just have intel_encoder_get_port()?
> > IOW, rename intel_ddi_get_encoder_port() to intel_encoder_get_port() and
> > move it out of intel_ddi.c?
> 
> That's what I just described essentially. The only catch is that the FDI
> port E case should stay in the DDI code and not be moved to generic
> code. Hence I suggested splitting it up.
> 

This is what I meant -

intel_get_encoder_port() is the generic catchall function, we should
expect it to handle analog encoders as well and leave the DDI specific
case to the DDI function.

enum port intel_get_encoder_port(struct intel_encoder *encoder)
{
        switch (encoder->type) {
        case INTEL_OUTPUT_DP_MST:
                return enc_to_mst(&encoder->base)->primary->port;
        case INTEL_OUTPUT_DP:
        case INTEL_OUTPUT_EDP:
        case INTEL_OUTPUT_HDMI:
        case INTEL_OUTPUT_UNKNOWN:
                return enc_to_dig_port(&encoder->base)->port;
        case INTEL_OUTPUT_ANALOG:
                return intel_ddi_get_analog_encoder_port(encoder);
        default:
                MISSING_CASE(encoder->type);
                return PORT_A;
        }
}


enum port intel_ddi_get_analog_encoder_port(struct intel_encoder
*encoder)
{
    return PORT_E;
}


> > 
> > 
> > > 
> > > or you could just your own function for intel_audio.c at this time, like:
> > > 
> > > static enum port encoder_get_port(encoder)
> > > {
> > > 	if (encoder->type == MST;
> > > 		return enc_to_mst()...;
> > > 	else
> > > 		return enc_to_dig_port()...;
> > > }
> > > 	
> > > 
> > > 
> > > >  
> > > > > >  {
> > > > > >  	struct hdac_bus *bus = codec->bus;
> > > > > >  	struct i915_audio_component *acomp = bus->audio_component;
> > > > > > @@ -212,7 +213,7 @@ int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
> > > > > >  	port = pin2port(codec, nid);
> > > > > >  	if (port < 0)
> > > > > >  		return -EINVAL;
> > > > > > -	return acomp->ops->sync_audio_rate(acomp->dev, port, rate);
> > > > > > +	return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
> > > > > >  }
> > > > > >  EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
> > > > > >  
> > > > > > @@ -236,7 +237,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
> > > > > >   * thus it may be over @max_bytes.  If it's over @max_bytes, it implies
> > > > > >   * that only a part of ELD bytes have been fetched.
> > > > > >   */
> > > > > > -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > > > > > +int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int pipe,
> > > > > >  			   bool *audio_enabled, char *buffer, int max_bytes)
> > > > > >  {
> > > > > >  	struct hdac_bus *bus = codec->bus;
> > > > > > @@ -249,7 +250,7 @@ int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > > > > >  	port = pin2port(codec, nid);
> > > > > >  	if (port < 0)
> > > > > >  		return -EINVAL;
> > > > > > -	return acomp->ops->get_eld(acomp->dev, port, audio_enabled,
> > > > > > +	return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
> > > > > >  				   buffer, max_bytes);
> > > > > >  }
> > > > > >  EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
> > > > > > diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> > > > > > index d0d5ad8..67890df 100644
> > > > > > --- a/sound/pci/hda/patch_hdmi.c
> > > > > > +++ b/sound/pci/hda/patch_hdmi.c
> > > > > > @@ -1485,7 +1485,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
> > > > > >  
> > > > > >  	mutex_lock(&per_pin->lock);
> > > > > >  	eld->monitor_present = false;
> > > > > > -	size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
> > > > > > +	size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid, -1,
> > > > > >  				      &eld->monitor_present, eld->eld_buffer,
> > > > > >  				      ELD_MAX_SIZE);
> > > > > >  	if (size > 0) {
> > > > > > @@ -1739,7 +1739,8 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
> > > > > >  	/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
> > > > > >  	/* Todo: add DP1.2 MST audio support later */
> > > > > >  	if (codec_has_acomp(codec))
> > > > > > -		snd_hdac_sync_audio_rate(&codec->core, pin_nid, runtime->rate);
> > > > > > +		snd_hdac_sync_audio_rate(&codec->core, pin_nid, -1,
> > > > > > +					 runtime->rate);
> > > > > >  
> > > > > >  	non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
> > > > > >  	mutex_lock(&per_pin->lock);
> > > > > > @@ -2285,7 +2286,7 @@ static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
> > > > > >  	snd_hda_codec_set_power_to_all(codec, fg, power_state);
> > > > > >  }
> > > > > >  
> > > > > > -static void intel_pin_eld_notify(void *audio_ptr, int port)
> > > > > > +static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
> > > > > >  {
> > > > > >  	struct hda_codec *codec = audio_ptr;
> > > > > >  	int pin_nid;
> > > > > > diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
> > > > > > index 2abb742..cf57ab3 100644
> > > > > > --- a/sound/soc/codecs/hdac_hdmi.c
> > > > > > +++ b/sound/soc/codecs/hdac_hdmi.c
> > > > > > @@ -1366,7 +1366,7 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
> > > > > >  	return hdac_hdmi_init_dai_map(edev);
> > > > > >  }
> > > > > >  
> > > > > > -static void hdac_hdmi_eld_notify_cb(void *aptr, int port)
> > > > > > +static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
> > > > > >  {
> > > > > >  	struct hdac_ext_device *edev = aptr;
> > > > > >  	struct hdac_hdmi_priv *hdmi = edev->private_data;
> > > > > > -- 
> > > > > > 2.5.0
> > > > > 
> > > > 
> > > 
> > 
> 

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux