Re: [PATCH 06/20] drm/i915: Handle log buffer flush interrupt event from GuC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 8/12/2016 7:37 PM, Tvrtko Ursulin wrote:

On 12/08/16 14:45, Goel, Akash wrote:


On 8/12/2016 6:47 PM, Tvrtko Ursulin wrote:

On 12/08/16 07:25, akash.goel@xxxxxxxxx wrote:
From: Sagar Arun Kamble <sagar.a.kamble@xxxxxxxxx>

GuC ukernel sends an interrupt to Host to flush the log buffer
and expects Host to correspondingly update the read pointer
information in the state structure, once it has consumed the
log buffer contents by copying them to a file or buffer.
Even if Host couldn't copy the contents, it can still update the
read pointer so that logging state is not disturbed on GuC side.

v2:
- Use a dedicated workqueue for handling flush interrupt. (Tvrtko)
- Reduce the overall log buffer copying time by skipping the copy of
   crash buffer area for regular cases and copying only the state
   structure data in first page.

v3:
  - Create a vmalloc mapping of log buffer. (Chris)
  - Cover the flush acknowledgment under rpm get & put.(Chris)
  - Revert the change of skipping the copy of crash dump area, as
    not really needed, will be covered by subsequent patch.

v4:
  - Destroy the wq under the same condition in which it was created,
    pass dev_piv pointer instead of dev to newly added GuC function,
    add more comments & rename variable for clarity. (Tvrtko)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@xxxxxxxxx>
Signed-off-by: Akash Goel <akash.goel@xxxxxxxxx>
---
  drivers/gpu/drm/i915/i915_drv.c            |  14 +++
  drivers/gpu/drm/i915/i915_guc_submission.c | 150
+++++++++++++++++++++++++++++
  drivers/gpu/drm/i915/i915_irq.c            |   5 +-
  drivers/gpu/drm/i915/intel_guc.h           |   3 +
  4 files changed, 170 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c
b/drivers/gpu/drm/i915/i915_drv.c
index 0fcd1c0..fc2da32 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -770,8 +770,20 @@ static int i915_workqueues_init(struct
drm_i915_private *dev_priv)
      if (dev_priv->hotplug.dp_wq == NULL)
          goto out_free_wq;

+    if (HAS_GUC_SCHED(dev_priv)) {

This just reminded me that a previous patch had:

+    if (HAS_GUC_UCODE(dev))
+        dev_priv->pm_guc_events = GEN9_GUC_TO_HOST_INT_EVENT;

In the interrupt setup. I don't think there is a bug right now, but
there is a disagreement between the two which would be good to resolve.

This HAS_GUC_UCODE in the other patch should probably be HAS_GUC_SCHED
for correctness. I think.

Sorry for inconsistency, Will use HAS_GUC_SCHED in the previous patch.

As per Chris's comments will move the wq init/destroy to the GuC logging
setup/teardown routines (guc_create_log_extras, guc_log_cleanup)
You are fine with that ?.

Yes thats OK I think.


+        /* Need a dedicated wq to process log buffer flush interrupts
+         * from GuC without much delay so as to avoid any loss of
logs.
+         */
+        dev_priv->guc.log.wq =
+            alloc_ordered_workqueue("i915-guc_log", 0);
+        if (dev_priv->guc.log.wq == NULL)
+            goto out_free_hotplug_dp_wq;
+    }
+
      return 0;

+out_free_hotplug_dp_wq:
+    destroy_workqueue(dev_priv->hotplug.dp_wq);
  out_free_wq:
      destroy_workqueue(dev_priv->wq);
  out_err:
@@ -782,6 +794,8 @@ out_err:

  static void i915_workqueues_cleanup(struct drm_i915_private
*dev_priv)
  {
+    if (HAS_GUC_SCHED(dev_priv))
+        destroy_workqueue(dev_priv->guc.log.wq);
      destroy_workqueue(dev_priv->hotplug.dp_wq);
      destroy_workqueue(dev_priv->wq);
  }
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c
b/drivers/gpu/drm/i915/i915_guc_submission.c
index c7c679f..2635b67 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -172,6 +172,15 @@ static int host2guc_sample_forcewake(struct
intel_guc *guc,
      return host2guc_action(guc, data, ARRAY_SIZE(data));
  }

+static int host2guc_logbuffer_flush_complete(struct intel_guc *guc)
+{
+    u32 data[1];
+
+    data[0] = HOST2GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE;
+
+    return host2guc_action(guc, data, 1);
+}
+
  /*
   * Initialise, update, or clear doorbell data shared with the GuC
   *
@@ -840,6 +849,127 @@ err:
      return NULL;
  }

+static void guc_move_to_next_buf(struct intel_guc *guc)
+{
+    return;
+}
+
+static void* guc_get_write_buffer(struct intel_guc *guc)
+{
+    return NULL;
+}
+
+static void guc_read_update_log_buffer(struct intel_guc *guc)
+{
+    struct guc_log_buffer_state *log_buffer_state,
*log_buffer_snapshot_state;
+    struct guc_log_buffer_state log_buffer_state_local;
+    void *src_data_ptr, *dst_data_ptr;
+    u32 i, buffer_size;

unsigned int i if you can be bothered.

Fine will do that for both i & buffer_size.

buffer_size can match the type of log_buffer_state_local.size or use
something else if more appropriate.

But I remember earlier in one of the patch, you suggested to use u32 as
a type for some variables.
Please could you share the guideline.
Should u32, u64 be used we are exactly sure of the range of the
variable, like for variables containing the register values ?

Depends what the variable is. "i" in this case is just a standard
counter so not appropriate to use u32. It is not that wrong on x86, just
looks a bit out of place.

grep "u32 i;" has no hits in i915. :)

They can/should be used for variables tied with hardware or protocols.
Or in some cases where you really want to save space by using a small type.

Thanks will be mindful of this.



+
+    if (!guc->log.buf_addr)
+        return;

Can it hit this? If yes, I think better disable GuC logging when pin map
on the object fails rather than let it generate interrupts in vain.

Ideally it should not, as logging itself is disabled (interrupts also disabled) on log buffer allocation failure.

+
+    /* Get the pointer to shared GuC log buffer */
+    log_buffer_state = src_data_ptr = guc->log.buf_addr;
+
+    /* Get the pointer to local buffer to store the logs */
+    dst_data_ptr = log_buffer_snapshot_state =
guc_get_write_buffer(guc);
+
+    /* Actual logs are present from the 2nd page */
+    src_data_ptr += PAGE_SIZE;
+    dst_data_ptr += PAGE_SIZE;
+
+    for (i = 0; i < GUC_MAX_LOG_BUFFER; i++) {
+        /* Make a copy of the state structure in GuC log buffer (which
+         * is uncached mapped) on the stack to avoid reading from it
+         * multiple times.
+         */
+        memcpy(&log_buffer_state_local, log_buffer_state,
+                sizeof(struct guc_log_buffer_state));
+        buffer_size = log_buffer_state_local.size;

Needs checking (and logging) that a bad firmware or some other error
does not report a dangerous size (too big) which would then overwrite
memory pointed by dst_data_ptr memory. (And/or read from random memory.)

Have done the range checking for the read/write offset values, which are
updated repeatedly by GuC firmware.
The buffer size is updated only at init time by GuC firmware, hence less
vulnerable.

But nevertheless will add the checks.

Ok good.

+
+        if (log_buffer_snapshot_state) {
+            /* First copy the state structure in local buffer */

Maybe "destination buffer" would be clearer?

Sorry my bad, well spotted.


+            memcpy(log_buffer_snapshot_state, &log_buffer_state_local,
+                    sizeof(struct guc_log_buffer_state));
+
+            /* The write pointer could have been updated by the GuC
+             * firmware, after sending the flush interrupt to Host,
+             * for consistency set the write pointer value to same
+             * value of sampled_write_ptr in the snapshot buffer.
+             */
+            log_buffer_snapshot_state->write_ptr =
+                log_buffer_snapshot_state->sampled_write_ptr;
+
+            log_buffer_snapshot_state++;
+
+            /* Now copy the actual logs */
+            memcpy(dst_data_ptr, src_data_ptr, buffer_size);
+
+            src_data_ptr += buffer_size;
+            dst_data_ptr += buffer_size;
+        }
+
+        /* FIXME: invalidate/flush for log buffer needed */

Yes no maybe? :)

Will like to keep it, if you allow.

I think you need a really good justification to get r-b on patches with
FIXMEs, especially like this one. Do you maybe handle it or remove it in
a following patch or something?

Have removed this FIXME in the later patch
"[PATCH 17/20] drm/i915: Use uncached(WC) mapping for acessing the GuC log buffer"

Best regards
Akash

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux