On 12/08/16 14:10, Goel, Akash wrote:
On 8/12/2016 5:24 PM, Tvrtko Ursulin wrote:
On 12/08/16 07:25, akash.goel@xxxxxxxxx wrote:
From: Sagar Arun Kamble <sagar.a.kamble@xxxxxxxxx>
There are certain types of interrupts which Host can recieve from GuC.
GuC ukernel sends an interrupt to Host for certain events, like for
example retrieve/consume the logs generated by ukernel.
This patch adds support to receive interrupts from GuC but currently
enables & partially handles only the interrupt sent by GuC ukernel.
Future patches will add support for handling other interrupt types.
v2:
- Use common low level routines for PM IER/IIR programming (Chris)
- Rename interrupt functions to gen9_xxx from gen8_xxx (Chris)
- Replace disabling of wake ref asserts with rpm get/put (Chris)
v3:
- Update comments for more clarity. (Tvrtko)
- Remove the masking of GuC interrupt, which was kept masked till the
start of bottom half, its not really needed as there is only a
single instance of work item & wq is ordered. (Tvrtko)
v4:
- Rebase.
- Rename guc_events to pm_guc_events so as to be indicative of the
register/control block it is associated with. (Chris)
- Add handling for back to back log buffer flush interrupts.
v5:
- Move the read & clearing of register, containing Guc2Host message
bits, outside the irq spinlock. (Tvrtko)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@xxxxxxxxx>
Signed-off-by: Akash Goel <akash.goel@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_guc_submission.c | 5 ++
drivers/gpu/drm/i915/i915_irq.c | 100
+++++++++++++++++++++++++++--
drivers/gpu/drm/i915/i915_reg.h | 11 ++++
drivers/gpu/drm/i915/intel_drv.h | 3 +
drivers/gpu/drm/i915/intel_guc.h | 4 ++
drivers/gpu/drm/i915/intel_guc_loader.c | 4 ++
7 files changed, 124 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h
b/drivers/gpu/drm/i915/i915_drv.h
index a608a5c..28ffac5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1779,6 +1779,7 @@ struct drm_i915_private {
u32 pm_imr;
u32 pm_ier;
u32 pm_rps_events;
+ u32 pm_guc_events;
u32 pipestat_irq_mask[I915_MAX_PIPES];
struct i915_hotplug hotplug;
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c
b/drivers/gpu/drm/i915/i915_guc_submission.c
index ad3b55f..c7c679f 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -1071,6 +1071,8 @@ int intel_guc_suspend(struct drm_device *dev)
if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
return 0;
+ gen9_disable_guc_interrupts(dev_priv);
+
ctx = dev_priv->kernel_context;
data[0] = HOST2GUC_ACTION_ENTER_S_STATE;
@@ -1097,6 +1099,9 @@ int intel_guc_resume(struct drm_device *dev)
if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
return 0;
+ if (i915.guc_log_level >= 0)
+ gen9_enable_guc_interrupts(dev_priv);
+
ctx = dev_priv->kernel_context;
data[0] = HOST2GUC_ACTION_EXIT_S_STATE;
diff --git a/drivers/gpu/drm/i915/i915_irq.c
b/drivers/gpu/drm/i915/i915_irq.c
index 5f93309..5f1974f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -170,6 +170,7 @@ static void gen5_assert_iir_is_zero(struct
drm_i915_private *dev_priv,
} while (0)
static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv,
u32 pm_iir);
+static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv,
u32 pm_iir);
/* For display hotplug interrupt */
static inline void
@@ -411,6 +412,38 @@ void gen6_disable_rps_interrupts(struct
drm_i915_private *dev_priv)
gen6_reset_rps_interrupts(dev_priv);
}
+void gen9_reset_guc_interrupts(struct drm_i915_private *dev_priv)
+{
+ spin_lock_irq(&dev_priv->irq_lock);
+ gen6_reset_pm_iir(dev_priv, dev_priv->pm_guc_events);
+ spin_unlock_irq(&dev_priv->irq_lock);
+}
+
+void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv)
+{
+ spin_lock_irq(&dev_priv->irq_lock);
+ if (!dev_priv->guc.interrupts_enabled) {
+ WARN_ON_ONCE(I915_READ(gen6_pm_iir(dev_priv)) &
+ dev_priv->pm_guc_events);
+ dev_priv->guc.interrupts_enabled = true;
+ gen6_enable_pm_irq(dev_priv, dev_priv->pm_guc_events);
+ }
+ spin_unlock_irq(&dev_priv->irq_lock);
+}
+
+void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv)
+{
+ spin_lock_irq(&dev_priv->irq_lock);
+ dev_priv->guc.interrupts_enabled = false;
+
+ gen6_disable_pm_irq(dev_priv, dev_priv->pm_guc_events);
+
+ spin_unlock_irq(&dev_priv->irq_lock);
+ synchronize_irq(dev_priv->drm.irq);
+
+ gen9_reset_guc_interrupts(dev_priv);
+}
+
/**
* bdw_update_port_irq - update DE port interrupt
* @dev_priv: driver private
@@ -1167,6 +1200,21 @@ static void gen6_pm_rps_work(struct work_struct
*work)
mutex_unlock(&dev_priv->rps.hw_lock);
}
+static void gen9_guc2host_events_work(struct work_struct *work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(work, struct drm_i915_private, guc.events_work);
+
+ spin_lock_irq(&dev_priv->irq_lock);
+ /* Speed up work cancellation during disabling guc interrupts. */
+ if (!dev_priv->guc.interrupts_enabled) {
+ spin_unlock_irq(&dev_priv->irq_lock);
+ return;
I suppose locking for early exit is something about ensuring the worker
sees the update to dev_priv->guc.interrupts_enabled done on another CPU?
Yes locking (providing implicit barrier) will ensure that update made
from another CPU is immediately visible to the worker.
What if the disable happens after the unlock above? It would wait in
disable until the irq handler exits. So the same as if not bothering
with the spinlock above, no?
synchronize_irq there is not enough for some reason?
synchronize_irq would not be enough, its for a different purpose, to
ensure that any ongoing handling of irq completes (after the caller has
disabled the irq).
As per my understanding synchronize_irq won't have an effect on the
worker, with respect to the moment when the update of
'interrupts_enabled' flag is visible to the worker.
+ }
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ /* TODO: Handle the events for which GuC interrupted host */
+}
/**
* ivybridge_parity_work - Workqueue called when a parity error
interrupt
@@ -1339,11 +1387,13 @@ static irqreturn_t gen8_gt_irq_ack(struct
drm_i915_private *dev_priv,
DRM_ERROR("The master control interrupt lied (GT3)!\n");
}
- if (master_ctl & GEN8_GT_PM_IRQ) {
+ if (master_ctl & (GEN8_GT_PM_IRQ | GEN8_GT_GUC_IRQ)) {
gt_iir[2] = I915_READ_FW(GEN8_GT_IIR(2));
- if (gt_iir[2] & dev_priv->pm_rps_events) {
+ if (gt_iir[2] & (dev_priv->pm_rps_events |
+ dev_priv->pm_guc_events)) {
I915_WRITE_FW(GEN8_GT_IIR(2),
- gt_iir[2] & dev_priv->pm_rps_events);
+ gt_iir[2] & (dev_priv->pm_rps_events |
+ dev_priv->pm_guc_events));
ret = IRQ_HANDLED;
} else
DRM_ERROR("The master control interrupt lied (PM)!\n");
@@ -1375,6 +1425,9 @@ static void gen8_gt_irq_handler(struct
drm_i915_private *dev_priv,
if (gt_iir[2] & dev_priv->pm_rps_events)
gen6_rps_irq_handler(dev_priv, gt_iir[2]);
+
+ if (gt_iir[2] & dev_priv->pm_guc_events)
+ gen9_guc_irq_handler(dev_priv, gt_iir[2]);
}
static bool bxt_port_hotplug_long_detect(enum port port, u32 val)
@@ -1621,6 +1674,41 @@ static void gen6_rps_irq_handler(struct
drm_i915_private *dev_priv, u32 pm_iir)
}
}
+static void gen9_guc_irq_handler(struct drm_i915_private *dev_priv,
u32 gt_iir)
+{
+ bool interrupts_enabled;
+
+ if (gt_iir & GEN9_GUC_TO_HOST_INT_EVENT) {
+ spin_lock(&dev_priv->irq_lock);
+ interrupts_enabled = dev_priv->guc.interrupts_enabled;
+ spin_unlock(&dev_priv->irq_lock);
Not sure that taking a lock around only this read is needed.
Again same reason as above, to make sure an update made on another CPU
is immediately visible to the irq handler.
I don't get it, see above. :)
+ if (interrupts_enabled) {
+ /* Sample the log buffer flush related bits & clear them
+ * out now itself from the message identity register to
+ * minimize the probability of losing a flush interrupt,
+ * when there are back to back flush interrupts.
+ * There can be a new flush interrupt, for different log
+ * buffer type (like for ISR), whilst Host is handling
+ * one (for DPC). Since same bit is used in message
+ * register for ISR & DPC, it could happen that GuC
+ * sets the bit for 2nd interrupt but Host clears out
+ * the bit on handling the 1st interrupt.
+ */
+ u32 msg = I915_READ(SOFT_SCRATCH(15)) &
+ (GUC2HOST_MSG_CRASH_DUMP_POSTED |
+ GUC2HOST_MSG_FLUSH_LOG_BUFFER);
+ if (msg) {
+ /* Clear the message bits that are handled */
+ I915_WRITE(SOFT_SCRATCH(15),
+ I915_READ(SOFT_SCRATCH(15)) & ~msg);
Cache full value of SOFT_SCRATCH(15) so you don't have to mmio read it
twice?
Thought reading it again (just before the update) is bit safer compared
to reading it once, as there is a potential race problem here.
GuC could also write to the SOFT_SCRATCH(15) register, set new events
bit, while Host clears off the bit of handled events.
Don't get it. If there is a race between read and write there still is,
don't see how a second read makes it safer.
Also, is the RMW outside any locks safe?
Ideally need a way to atomically do the RMW, i.e. read the register
value, clear off the handled events bit and update the register with the
modified value.
Please kindly suggest how to address the above.
Or can this be left as a TODO, when we do start handling other events also.
From the comment in code above it sounds like a GuC fw interface
shortcoming - that there is a single bit for two different interrupt
sources, is that right? Is there any other register or something that
you can read to detect that the interrupt has been re-asserted while in
the irq handler? Although I thought you said before that the GuC will
not do that - that it won't re-assert the interrupt before we send the
flush command.
+
+ /* Handle flush interrupt event in bottom half */
+ queue_work(dev_priv->wq, &dev_priv->guc.events_work);
IMHO it would be nicer if the code started straight away with a final wq
solution.
Especially since the next patch in the series is called "Handle log
buffer flush interrupt event from GuC" and the actual handling of the
log buffer flush interrupt is split between this one
(GUC2HOST_MSG_FLUSH_LOG_BUFFER above) and that one.
So it would almost be nicer that the above chunk which handles
GUC2HOST_MSG_FLUSH_LOG_BUFFER and the worker init is only added in the
next patch and this one only does the generic bits.
Fine will move the log buffer flush interrupt event related stuff to the
next patch and so irq handler in this patch will just be a
placeholder.
Great thanks!
I don't know.. I'll leave it on your conscience - if you think the split
(series) can't be done any nicer or it makes sense to have it in this
order then ok.
+ }
Mabye:
} else
And log something unexpected has happened in the !msg case?
Since it won't clear the message in that case so would it keep
triggering?
Actually after enabling of GuC interrupt, there can be interrupts from
GuC side for some other events which are right now not handled by Host.
But not clearing of unhandled event bits won't result in re-triggering
of the interrupt.
Ok I suggest documenting that as a comment in code then.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
