- Move the intro section into a DOC comment, and update it slightly.
- kernel-doc for struct drm_framebuffer!
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
Documentation/gpu/drm-kms.rst | 26 +----------
drivers/gpu/drm/drm_framebuffer.c | 35 +++++++++++++++
include/drm/drm_framebuffer.h | 94 +++++++++++++++++++++++++++++++++------
3 files changed, 118 insertions(+), 37 deletions(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 8264a88a8695..d244e03658cc 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -39,30 +39,8 @@ Atomic Mode Setting Function Reference
Frame Buffer Abstraction
========================
-Frame buffers are abstract memory objects that provide a source of
-pixels to scanout to a CRTC. Applications explicitly request the
-creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls
-and receive an opaque handle that can be passed to the KMS CRTC control,
-plane configuration and page flip functions.
-
-Frame buffers rely on the underneath memory manager for low-level memory
-operations. When creating a frame buffer applications pass a memory
-handle (or a list of memory handles for multi-planar formats) through
-the ``drm_mode_fb_cmd2`` argument. For drivers using GEM as their
-userspace buffer management interface this would be a GEM handle.
-Drivers are however free to use their own backing storage object
-handles, e.g. vmwgfx directly exposes special TTM handles to userspace
-and so expects TTM handles in the create ioctl and not GEM handles.
-
-The lifetime of a drm framebuffer is controlled with a reference count,
-drivers can grab additional references with
-:c:func:`drm_framebuffer_reference()`and drop them again with
-:c:func:`drm_framebuffer_unreference()`. For driver-private
-framebuffers for which the last reference is never dropped (e.g. for the
-fbdev framebuffer when the struct :c:type:`struct drm_framebuffer
-<drm_framebuffer>` is embedded into the fbdev helper struct)
-drivers can manually clean up a framebuffer at module unload time with
-:c:func:`drm_framebuffer_unregister_private()`.
+.. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c
+ :doc: overview
Frame Buffer Functions Reference
--------------------------------
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index c7a8a623b336..f2f4928c7262 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -28,6 +28,41 @@
#include "drm_crtc_internal.h"
/**
+ * DOC: overview
+ *
+ * Frame buffers are abstract memory objects that provide a source of pixels to
+ * scanout to a CRTC. Applications explicitly request the creation of frame
+ * buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and receive an opaque
+ * handle that can be passed to the KMS CRTC control, plane configuration and
+ * page flip functions.
+ *
+ * Frame buffers rely on the underlying memory manager for allocating backing
+ * storage. When creating a frame buffer applications pass a memory handle
+ * (or a list of memory handles for multi-planar formats) through the
+ * struct &drm_mode_fb_cmd2 argument. For drivers using GEM as their userspace
+ * buffer management interface this would be a GEM handle. Drivers are however
+ * free to use their own backing storage object handles, e.g. vmwgfx directly
+ * exposes special TTM handles to userspace and so expects TTM handles in the
+ * create ioctl and not GEM handles.
+ *
+ * Framebuffers are tracked with struct &drm_framebuffer. They are published
+ * using drm_framebuffer_init() - after calling that function userspace can use
+ * and access the framebuffer object. The helper function
+ * drm_helper_mode_fill_fb_struct() can be used to pre-fill the required
+ * metadata fields.
+ *
+ * The lifetime of a drm framebuffer is controlled with a reference count,
+ * drivers can grab additional references with drm_framebuffer_reference() and
+ * drop them again with drm_framebuffer_unreference(). For driver-private
+ * framebuffers for which the last reference is never dropped (e.g. for the
+ * fbdev framebuffer when the struct struct &drm_framebuffer is embedded into
+ * the fbdev helper struct) drivers can manually clean up a framebuffer at
+ * module unload time with drm_framebuffer_unregister_private(). But doing this
+ * is not recommended, and it's better to have a normal free-standing struct
+ * &drm_framebuffer.
+ */
+
+/**
* drm_mode_addfb - add an FB to the graphics configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h
index 46abdace8fa5..685e062e57d7 100644
--- a/include/drm/drm_framebuffer.h
+++ b/include/drm/drm_framebuffer.h
@@ -92,37 +92,105 @@ struct drm_framebuffer_funcs {
unsigned num_clips);
};
+/**
+ * struct drm_framebuffer - frame buffer object
+ *
+ * Note that the fb is refcounted for the benefit of driver internals,
+ * for example some hw, disabling a CRTC/plane is asynchronous, and
+ * scanout does not actually complete until the next vblank. So some
+ * cleanup (like releasing the reference(s) on the backing GEM bo(s))
+ * should be deferred. In cases like this, the driver would like to
+ * hold a ref to the fb even though it has already been removed from
+ * userspace perspective. See drm_framebuffer_reference() and
+ * drm_framebuffer_unreference().
+ *
+ * The refcount is stored inside the mode object @base.
+ */
struct drm_framebuffer {
+ /**
+ * @dev: DRM device this framebuffer belongs to
+ */
struct drm_device *dev;
- /*
- * Note that the fb is refcounted for the benefit of driver internals,
- * for example some hw, disabling a CRTC/plane is asynchronous, and
- * scanout does not actually complete until the next vblank. So some
- * cleanup (like releasing the reference(s) on the backing GEM bo(s))
- * should be deferred. In cases like this, the driver would like to
- * hold a ref to the fb even though it has already been removed from
- * userspace perspective.
- * The refcount is stored inside the mode object.
- */
- /*
- * Place on the dev->mode_config.fb_list, access protected by
+ /**
+ * @head: Place on the dev->mode_config.fb_list, access protected by
* dev->mode_config.fb_lock.
*/
struct list_head head;
+
+ /**
+ * @base: base modeset object structure, contains the reference count.
+ */
struct drm_mode_object base;
+ /**
+ * @funcs: framebuffer vfunc table
+ */
const struct drm_framebuffer_funcs *funcs;
+ /**
+ * @pitches: Line stride per buffer. For userspace created object this
+ * is copied from drm_mode_fb_cmd2.
+ */
unsigned int pitches[4];
+ /**
+ * @offsets: Offset from buffer start to the actual pixel data in bytes,
+ * per buffer. For userspace created object this is copied from
+ * drm_mode_fb_cmd2.
+ */
unsigned int offsets[4];
+ /**
+ * @modifier: Data layout modifier, per buffer. This is used to describe
+ * tiling, or also special layouts (like compression) of auxiliary
+ * buffers. For userspace created object this is copied from
+ * drm_mode_fb_cmd2.
+ */
uint64_t modifier[4];
+ /**
+ * @width: Logical width of the visible area of the framebuffer, in
+ * pixels.
+ */
unsigned int width;
+ /**
+ * @height: Logical width of the visible area of the framebuffer, in
+ * pixels.
+ */
unsigned int height;
- /* depth can be 15 or 16 */
+ /**
+ * @depth: Depth in bits per pixel for RGB formats. 0 for everything
+ * else. Legacy information derived from @pixel_format, it's suggested to use
+ * the DRM FOURCC codes and helper functions directly instead.
+ */
unsigned int depth;
+ /**
+ * @bits_per_pixel: Storage used bits per pixel for RGB formats. 0 for
+ * everything else. Legacy information derived from @pixel_format, it's
+ * suggested to use the DRM FOURCC codes and helper functions directly
+ * instead.
+ */
int bits_per_pixel;
+ /**
+ * @flags: Framebuffer flags like DRM_MODE_FB_INTERLACED or
+ * DRM_MODE_FB_MODIFIERS.
+ */
int flags;
+ /**
+ * @pixel_format: DRM FOURCC code describing the pixel format.
+ */
uint32_t pixel_format; /* fourcc format */
+ /**
+ * @hot_x: X coordinate of the cursor hotspot. Used by the legacy cursor
+ * IOCTL when the driver supports cursor through a DRM_PLANE_TYPE_CURSOR
+ * universal plane.
+ */
int hot_x;
+ /**
+ * @hot_y: Y coordinate of the cursor hotspot. Used by the legacy cursor
+ * IOCTL when the driver supports cursor through a DRM_PLANE_TYPE_CURSOR
+ * universal plane.
+ */
int hot_y;
+ /**
+ * @filp_head: Placed on struct &drm_file fbs list_head, protected by
+ * fbs_lock in the same structure.
+ */
struct list_head filp_head;
};
--
2.8.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
