The PPS registers are pretty much the same everywhere, the differences
being:
- Register fields appearing, disappearing from one platform to the
next: panel-reset-on-powerdown, backlight-on, panel-port,
register-unlock
- Different register base addresses
- Different number of PPS instances: 2 on VLV/CHV/BXT, 1 everywhere
else.
We can merge the separate set of PPS definitions by extending the PPS
instance argument to all platforms and using instance 0 on platforms
with a single instance. This means we'll need to calculate the register
addresses dynamically based on the given platform and PPS instance.
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_reg.h | 145 ++++++++++++++---------------------
drivers/gpu/drm/i915/i915_suspend.c | 30 +++-----
drivers/gpu/drm/i915/intel_display.c | 22 ++++--
drivers/gpu/drm/i915/intel_dp.c | 47 +++++-------
drivers/gpu/drm/i915/intel_lvds.c | 43 +++--------
6 files changed, 119 insertions(+), 170 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c36d176..fddaec6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1749,6 +1749,8 @@ struct drm_i915_private {
uint32_t psr_mmio_base;
+ uint32_t pps_mmio_base;
+
wait_queue_head_t gmbus_wait_queue;
struct pci_dev *bridge_dev;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f38a5e2..b65fe50 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3660,8 +3660,17 @@ enum {
#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
/* Panel power sequencing */
-#define PP_STATUS _MMIO(0x61200)
-#define PP_ON (1 << 31)
+#define PPS_BASE 0x61200
+#define VLV_PPS_BASE (VLV_DISPLAY_BASE + PPS_BASE)
+#define PCH_PPS_BASE 0xC7200
+
+#define _MMIO_PPS(pps_idx, reg) _MMIO(dev_priv->pps_mmio_base - \
+ PPS_BASE + (reg) + \
+ (pps_idx) * 0x100)
+
+#define _PP_STATUS 0x61200
+#define PP_STATUS(pps_idx) _MMIO_PPS(pps_idx, _PP_STATUS)
+#define PP_ON (1 << 31)
/*
* Indicates that all dependencies of the panel are on:
*
@@ -3669,14 +3678,14 @@ enum {
* - pipe enabled
* - LVDS/DVOB/DVOC on
*/
-#define PP_READY (1 << 30)
-#define PP_SEQUENCE_NONE (0 << 28)
-#define PP_SEQUENCE_POWER_UP (1 << 28)
-#define PP_SEQUENCE_POWER_DOWN (2 << 28)
-#define PP_SEQUENCE_MASK (3 << 28)
-#define PP_SEQUENCE_SHIFT 28
-#define PP_CYCLE_DELAY_ACTIVE (1 << 27)
-#define PP_SEQUENCE_STATE_MASK 0x0000000f
+#define PP_READY (1 << 30)
+#define PP_SEQUENCE_NONE (0 << 28)
+#define PP_SEQUENCE_POWER_UP (1 << 28)
+#define PP_SEQUENCE_POWER_DOWN (2 << 28)
+#define PP_SEQUENCE_MASK (3 << 28)
+#define PP_SEQUENCE_SHIFT 28
+#define PP_CYCLE_DELAY_ACTIVE (1 << 27)
+#define PP_SEQUENCE_STATE_MASK 0x0000000f
#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0)
#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0)
#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0)
@@ -3686,11 +3695,46 @@ enum {
#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0)
#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0)
#define PP_SEQUENCE_STATE_RESET (0xf << 0)
-#define PP_CONTROL _MMIO(0x61204)
-#define POWER_TARGET_ON (1 << 0)
-#define PP_ON_DELAYS _MMIO(0x61208)
-#define PP_OFF_DELAYS _MMIO(0x6120c)
-#define PP_DIVISOR _MMIO(0x61210)
+
+#define _PP_CONTROL 0x61204
+#define PP_CONTROL(pps_idx) _MMIO_PPS(pps_idx, _PP_CONTROL)
+#define PANEL_UNLOCK_REGS (0xabcd << 16)
+#define PANEL_UNLOCK_MASK (0xffff << 16)
+#define BXT_POWER_CYCLE_DELAY_MASK 0x1f0
+#define BXT_POWER_CYCLE_DELAY_SHIFT 4
+#define EDP_FORCE_VDD (1 << 3)
+#define EDP_BLC_ENABLE (1 << 2)
+#define PANEL_POWER_RESET (1 << 1)
+#define PANEL_POWER_OFF (0 << 0)
+#define PANEL_POWER_ON (1 << 0)
+#define POWER_TARGET_ON (1 << 0)
+
+#define _PP_ON_DELAYS 0x61208
+#define PP_ON_DELAYS(pps_idx) _MMIO_PPS(pps_idx, _PP_ON_DELAYS)
+#define PANEL_PORT_SELECT_MASK (3 << 30)
+#define PANEL_PORT_SELECT_LVDS (0 << 30)
+#define PANEL_PORT_SELECT_DPA (1 << 30)
+#define PANEL_PORT_SELECT_DPC (2 << 30)
+#define PANEL_PORT_SELECT_DPD (3 << 30)
+#define PANEL_PORT_SELECT_VLV(port) ((port) << 30)
+#define PANEL_POWER_UP_DELAY_MASK 0x1fff0000
+#define PANEL_POWER_UP_DELAY_SHIFT 16
+#define PANEL_LIGHT_ON_DELAY_MASK 0x1fff
+#define PANEL_LIGHT_ON_DELAY_SHIFT 0
+
+#define _PP_OFF_DELAYS 0x6120C
+#define PP_OFF_DELAYS(pps_idx) _MMIO_PPS(pps_idx, _PP_OFF_DELAYS)
+#define PANEL_POWER_DOWN_DELAY_MASK 0x1fff0000
+#define PANEL_POWER_DOWN_DELAY_SHIFT 16
+#define PANEL_LIGHT_OFF_DELAY_MASK 0x1fff
+#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
+
+#define _PP_DIVISOR 0x61210
+#define PP_DIVISOR(pps_idx) _MMIO_PPS(pps_idx, _PP_DIVISOR)
+#define PP_REFERENCE_DIVIDER_MASK 0xffffff00
+#define PP_REFERENCE_DIVIDER_SHIFT 8
+#define PANEL_POWER_CYCLE_DELAY_MASK 0x1f
+#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
/* Panel fitting */
#define PFIT_CONTROL _MMIO(dev_priv->info.display_mmio_offset + 0x61230)
@@ -6750,77 +6794,6 @@ enum {
#define PCH_LVDS _MMIO(0xe1180)
#define LVDS_DETECTED (1 << 1)
-/* vlv has 2 sets of panel control regs. */
-#define _PIPEA_PP_STATUS (VLV_DISPLAY_BASE + 0x61200)
-#define _PIPEA_PP_CONTROL (VLV_DISPLAY_BASE + 0x61204)
-#define _PIPEA_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61208)
-#define PANEL_PORT_SELECT_VLV(port) ((port) << 30)
-#define _PIPEA_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6120c)
-#define _PIPEA_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61210)
-
-#define _PIPEB_PP_STATUS (VLV_DISPLAY_BASE + 0x61300)
-#define _PIPEB_PP_CONTROL (VLV_DISPLAY_BASE + 0x61304)
-#define _PIPEB_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61308)
-#define _PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c)
-#define _PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310)
-
-#define VLV_PIPE_PP_STATUS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_STATUS, _PIPEB_PP_STATUS)
-#define VLV_PIPE_PP_CONTROL(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_CONTROL, _PIPEB_PP_CONTROL)
-#define VLV_PIPE_PP_ON_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_ON_DELAYS, _PIPEB_PP_ON_DELAYS)
-#define VLV_PIPE_PP_OFF_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_OFF_DELAYS, _PIPEB_PP_OFF_DELAYS)
-#define VLV_PIPE_PP_DIVISOR(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_DIVISOR, _PIPEB_PP_DIVISOR)
-
-#define _PCH_PP_STATUS 0xc7200
-#define _PCH_PP_CONTROL 0xc7204
-#define PANEL_UNLOCK_REGS (0xabcd << 16)
-#define PANEL_UNLOCK_MASK (0xffff << 16)
-#define BXT_POWER_CYCLE_DELAY_MASK (0x1f0)
-#define BXT_POWER_CYCLE_DELAY_SHIFT 4
-#define EDP_FORCE_VDD (1 << 3)
-#define EDP_BLC_ENABLE (1 << 2)
-#define PANEL_POWER_RESET (1 << 1)
-#define PANEL_POWER_OFF (0 << 0)
-#define PANEL_POWER_ON (1 << 0)
-#define _PCH_PP_ON_DELAYS 0xc7208
-#define PANEL_PORT_SELECT_MASK (3 << 30)
-#define PANEL_PORT_SELECT_LVDS (0 << 30)
-#define PANEL_PORT_SELECT_DPA (1 << 30)
-#define PANEL_PORT_SELECT_DPC (2 << 30)
-#define PANEL_PORT_SELECT_DPD (3 << 30)
-#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000)
-#define PANEL_POWER_UP_DELAY_SHIFT 16
-#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff)
-#define PANEL_LIGHT_ON_DELAY_SHIFT 0
-
-#define _PCH_PP_OFF_DELAYS 0xc720c
-#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000)
-#define PANEL_POWER_DOWN_DELAY_SHIFT 16
-#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff)
-#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
-
-#define _PCH_PP_DIVISOR 0xc7210
-#define PP_REFERENCE_DIVIDER_MASK (0xffffff00)
-#define PP_REFERENCE_DIVIDER_SHIFT 8
-#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f)
-#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
-
-#define PCH_PP_STATUS _MMIO(_PCH_PP_STATUS)
-#define PCH_PP_CONTROL _MMIO(_PCH_PP_CONTROL)
-#define PCH_PP_ON_DELAYS _MMIO(_PCH_PP_ON_DELAYS)
-#define PCH_PP_OFF_DELAYS _MMIO(_PCH_PP_OFF_DELAYS)
-#define PCH_PP_DIVISOR _MMIO(_PCH_PP_DIVISOR)
-
-/* BXT PPS changes - 2nd set of PPS registers */
-#define _BXT_PP_STATUS2 0xc7300
-#define _BXT_PP_CONTROL2 0xc7304
-#define _BXT_PP_ON_DELAYS2 0xc7308
-#define _BXT_PP_OFF_DELAYS2 0xc730c
-
-#define BXT_PP_STATUS(n) _MMIO_PIPE(n, _PCH_PP_STATUS, _BXT_PP_STATUS2)
-#define BXT_PP_CONTROL(n) _MMIO_PIPE(n, _PCH_PP_CONTROL, _BXT_PP_CONTROL2)
-#define BXT_PP_ON_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_ON_DELAYS, _BXT_PP_ON_DELAYS2)
-#define BXT_PP_OFF_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_OFF_DELAYS, _BXT_PP_OFF_DELAYS2)
-
#define _PCH_DP_B 0xe4100
#define PCH_DP_B _MMIO(_PCH_DP_B)
#define _PCH_DPB_AUX_CH_CTL 0xe4110
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5cfe4c7..c826b69 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -44,16 +44,11 @@ static void i915_save_display(struct drm_device *dev)
dev_priv->regfile.saveLVDS = I915_READ(LVDS);
/* Panel power sequencer */
- if (HAS_PCH_SPLIT(dev)) {
- dev_priv->regfile.savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
- dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
- dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
- dev_priv->regfile.savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
- } else if (INTEL_INFO(dev)->gen <= 4) {
- dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR);
+ if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
+ dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL(0));
+ dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS(0));
+ dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS(0));
+ dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR(0));
}
/* save FBC interval */
@@ -79,16 +74,11 @@ static void i915_restore_display(struct drm_device *dev)
I915_WRITE(LVDS, dev_priv->regfile.saveLVDS & mask);
/* Panel power sequencer */
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
- I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
- I915_WRITE(PCH_PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
- I915_WRITE(PCH_PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
- } else if (INTEL_INFO(dev)->gen <= 4) {
- I915_WRITE(PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
- I915_WRITE(PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
- I915_WRITE(PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
- I915_WRITE(PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
+ if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
+ I915_WRITE(PP_ON_DELAYS(0), dev_priv->regfile.savePP_ON_DELAYS);
+ I915_WRITE(PP_OFF_DELAYS(0), dev_priv->regfile.savePP_OFF_DELAYS);
+ I915_WRITE(PP_DIVISOR(0), dev_priv->regfile.savePP_DIVISOR);
+ I915_WRITE(PP_CONTROL(0), dev_priv->regfile.savePP_CONTROL);
}
/* only restore FBC info on the platform that supports FBC*/
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c6f27ab..3d5fd06 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1202,8 +1202,8 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
if (HAS_PCH_SPLIT(dev)) {
u32 port_sel;
- pp_reg = PCH_PP_CONTROL;
- port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
+ pp_reg = PP_CONTROL(0);
+ port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
if (port_sel == PANEL_PORT_SELECT_LVDS &&
I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
@@ -1211,10 +1211,10 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
/* XXX: else fix for eDP */
} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
/* presumably write lock depends on pipe, not port select */
- pp_reg = VLV_PIPE_PP_CONTROL(pipe);
+ pp_reg = PP_CONTROL(pipe);
panel_pipe = pipe;
} else {
- pp_reg = PP_CONTROL;
+ pp_reg = PP_CONTROL(0);
if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
panel_pipe = PIPE_B;
}
@@ -9411,7 +9411,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
- I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+ I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON, "Panel power on\n");
I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
"CPU PWM1 enabled\n");
if (IS_HASWELL(dev))
@@ -14635,12 +14635,24 @@ static bool intel_crt_present(struct drm_device *dev)
return true;
}
+static void intel_pps_init(struct drm_i915_private *dev_priv)
+{
+ if (HAS_PCH_SPLIT(dev_priv) || IS_BROXTON(dev_priv))
+ dev_priv->pps_mmio_base = PCH_PPS_BASE;
+ else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ dev_priv->pps_mmio_base = VLV_PPS_BASE;
+ else
+ dev_priv->pps_mmio_base = PPS_BASE;
+}
+
static void intel_setup_outputs(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_encoder *encoder;
bool dpd_is_edp = false;
+ intel_pps_init(dev_priv);
+
/*
* intel_edp_init_connector() depends on this completing first, to
* prevent the registeration of both eDP and LVDS and the incorrect
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8fe2afa..a5cef91 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -463,13 +463,13 @@ typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
- return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON;
+ return I915_READ(PP_STATUS(pipe)) & PP_ON;
}
static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
- return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD;
+ return I915_READ(PP_CONTROL(pipe)) & EDP_FORCE_VDD;
}
static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
@@ -486,7 +486,7 @@ vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
enum pipe pipe;
for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
- u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
+ u32 port_sel = I915_READ(PP_ON_DELAYS(pipe)) &
PANEL_PORT_SELECT_MASK;
if (port_sel != PANEL_PORT_SELECT_VLV(port))
@@ -583,30 +583,23 @@ static void intel_pps_get_registers(struct drm_i915_private *dev_priv,
struct intel_dp *intel_dp,
struct pps_registers *regs)
{
+ int pps_idx;
+
memset(regs, 0, sizeof(*regs));
- if (IS_BROXTON(dev_priv)) {
- int idx = bxt_power_sequencer_idx(intel_dp);
+ if (IS_BROXTON(dev_priv))
+ pps_idx = bxt_power_sequencer_idx(intel_dp);
+ else if (HAS_PCH_SPLIT(dev_priv))
+ pps_idx = 0;
+ else
+ pps_idx = vlv_power_sequencer_pipe(intel_dp);
- regs->pp_ctrl = BXT_PP_CONTROL(idx);
- regs->pp_stat = BXT_PP_STATUS(idx);
- regs->pp_on = BXT_PP_ON_DELAYS(idx);
- regs->pp_off = BXT_PP_OFF_DELAYS(idx);
- } else if (HAS_PCH_SPLIT(dev_priv)) {
- regs->pp_ctrl = PCH_PP_CONTROL;
- regs->pp_stat = PCH_PP_STATUS;
- regs->pp_on = PCH_PP_ON_DELAYS;
- regs->pp_off = PCH_PP_OFF_DELAYS;
- regs->pp_div = PCH_PP_DIVISOR;
- } else {
- enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
-
- regs->pp_ctrl = VLV_PIPE_PP_CONTROL(pipe);
- regs->pp_stat = VLV_PIPE_PP_STATUS(pipe);
- regs->pp_on = VLV_PIPE_PP_ON_DELAYS(pipe);
- regs->pp_off = VLV_PIPE_PP_OFF_DELAYS(pipe);
- regs->pp_div = VLV_PIPE_PP_DIVISOR(pipe);
- }
+ regs->pp_ctrl = PP_CONTROL(pps_idx);
+ regs->pp_stat = PP_STATUS(pps_idx);
+ regs->pp_on = PP_ON_DELAYS(pps_idx);
+ regs->pp_off = PP_OFF_DELAYS(pps_idx);
+ if (!IS_BROXTON(dev_priv))
+ regs->pp_div = PP_DIVISOR(pps_idx);
}
static i915_reg_t
@@ -651,8 +644,8 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
i915_reg_t pp_ctrl_reg, pp_div_reg;
u32 pp_div;
- pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
- pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
+ pp_ctrl_reg = PP_CONTROL(pipe);
+ pp_div_reg = PP_DIVISOR(pipe);
pp_div = I915_READ(pp_div_reg);
pp_div &= PP_REFERENCE_DIVIDER_MASK;
@@ -2729,7 +2722,7 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
enum pipe pipe = intel_dp->pps_pipe;
- i915_reg_t pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+ i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
edp_panel_vdd_off_sync(intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 4955047..413e729 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -217,21 +217,12 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
struct intel_connector *intel_connector =
&lvds_encoder->attached_connector->base;
struct drm_i915_private *dev_priv = to_i915(dev);
- i915_reg_t ctl_reg, stat_reg;
-
- if (HAS_PCH_SPLIT(dev)) {
- ctl_reg = PCH_PP_CONTROL;
- stat_reg = PCH_PP_STATUS;
- } else {
- ctl_reg = PP_CONTROL;
- stat_reg = PP_STATUS;
- }
I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) | POWER_TARGET_ON);
POSTING_READ(lvds_encoder->reg);
- if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, PP_ON, 1000))
+ if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 1000))
DRM_ERROR("timed out waiting for panel to power on\n");
intel_panel_enable_backlight(intel_connector);
@@ -242,18 +233,9 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
struct drm_device *dev = encoder->base.dev;
struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(dev);
- i915_reg_t ctl_reg, stat_reg;
- if (HAS_PCH_SPLIT(dev)) {
- ctl_reg = PCH_PP_CONTROL;
- stat_reg = PCH_PP_STATUS;
- } else {
- ctl_reg = PP_CONTROL;
- stat_reg = PP_STATUS;
- }
-
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
- if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, 0, 1000))
+ I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) & ~POWER_TARGET_ON);
+ if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, 0, 1000))
DRM_ERROR("timed out waiting for panel to power off\n");
I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
@@ -904,13 +886,10 @@ void intel_lvds_init(struct drm_device *dev)
* Unlock registers and just leave them unlocked. Do this before
* checking quirk lists to avoid bogus WARNINGs.
*/
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PCH_PP_CONTROL,
- I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
- } else if (INTEL_INFO(dev_priv)->gen < 5) {
- I915_WRITE(PP_CONTROL,
- I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
- }
+ if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4)
+ I915_WRITE(PP_CONTROL(0),
+ I915_READ(PP_CONTROL(0)) | PANEL_UNLOCK_REGS);
+
if (!intel_lvds_supported(dev))
return;
@@ -945,12 +924,12 @@ void intel_lvds_init(struct drm_device *dev)
/* Set the Panel Power On/Off timings if uninitialized. */
if (INTEL_INFO(dev_priv)->gen < 5 &&
- I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
+ I915_READ(PP_ON_DELAYS(0)) == 0 && I915_READ(PP_OFF_DELAYS(0)) == 0) {
/* Set T2 to 40ms and T5 to 200ms */
- I915_WRITE(PP_ON_DELAYS, 0x019007d0);
+ I915_WRITE(PP_ON_DELAYS(0), 0x019007d0);
/* Set T3 to 35ms and Tx to 200ms */
- I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
+ I915_WRITE(PP_OFF_DELAYS(0), 0x015e07d0);
DRM_DEBUG_KMS("Panel power timings uninitialized, setting defaults\n");
}
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
