[PATCH 1/4] drm/i915/dp: Add debug messages to print DP link training pattern

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently we do not print the training pattern used in any of the DP link
training stages. Including this piece of information in debug messages will
help debugging.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 21b04c3..3ca33bd 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2547,6 +2547,10 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	enum port port = intel_dig_port->port;
 
+	if (dp_train_pat & DP_TRAINING_PATTERN_MASK)
+		DRM_DEBUG_KMS("Using DP training pattern TPS%d\n",
+			      dp_train_pat & DP_TRAINING_PATTERN_MASK);
+
 	if (HAS_DDI(dev)) {
 		uint32_t temp = I915_READ(DP_TP_CTL(port));
 
@@ -2588,7 +2592,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
 			*DP |= DP_LINK_TRAIN_PAT_2_CPT;
 			break;
 		case DP_TRAINING_PATTERN_3:
-			DRM_ERROR("DP training pattern 3 not supported\n");
+			DRM_ERROR("TPS3 not supported, using TPS2 instead\n");
 			*DP |= DP_LINK_TRAIN_PAT_2_CPT;
 			break;
 		}
@@ -2613,7 +2617,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
 			if (IS_CHERRYVIEW(dev)) {
 				*DP |= DP_LINK_TRAIN_PAT_3_CHV;
 			} else {
-				DRM_ERROR("DP training pattern 3 not supported\n");
+				DRM_ERROR("TPS3 not supported, using TPS2 instead\n");
 				*DP |= DP_LINK_TRAIN_PAT_2;
 			}
 			break;
@@ -2629,11 +2633,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp)
 		to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
 
 	/* enable with pattern 1 (as per spec) */
-	_intel_dp_set_link_train(intel_dp, &intel_dp->DP,
-				 DP_TRAINING_PATTERN_1);
 
-	I915_WRITE(intel_dp->output_reg, intel_dp->DP);
-	POSTING_READ(intel_dp->output_reg);
+	intel_dp_program_link_training_pattern(intel_dp, DP_TRAINING_PATTERN_1);
 
 	/*
 	 * Magic for VLV/CHV. We _must_ first set up the register
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux