On Wed, Aug 3, 2016 at 6:56 AM, Shashank Sharma
<shashank.sharma@xxxxxxxxx> wrote:
> Current DRM layer functions dont parse aspect ratio information
s/dont/don't/
> while converting a user mode->kernel mode or viceversa. This
s/viceversa/vice versa/
> causes modeset to pick mode with wrong aspect ratio, eventually
> cauing failures in HDMI compliance test cases, due to wrong VIC.
s/cauing/causing/
Sorry for the spelling nits. I originally just found this one, but
since I was nitpicking one, I figured I should pick at them all.
>
> This patch adds aspect ratio information in DRM's mode conversion
> and mode comparision functions, to make sure kernel picks mode
> with right aspect ratio (as per the VIC).
>
> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> Signed-off-by: Lin, Jia <lin.a.jia@xxxxxxxxx>
> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_modes.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index fc5040a..e6029e0 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -969,6 +969,7 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
> mode1->vsync_end == mode2->vsync_end &&
> mode1->vtotal == mode2->vtotal &&
> mode1->vscan == mode2->vscan &&
> + mode1->picture_aspect_ratio == mode2->picture_aspect_ratio &&
> (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) ==
> (mode2->flags & ~DRM_MODE_FLAG_3D_MASK))
> return true;
> @@ -1471,6 +1472,22 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
> out->vrefresh = in->vrefresh;
> out->flags = in->flags;
> out->type = in->type;
> + out->flags &= ~DRM_MODE_FLAG_PARMASK;
> +
> + switch (in->picture_aspect_ratio) {
> + case HDMI_PICTURE_ASPECT_4_3:
> + out->flags |= DRM_MODE_FLAG_PAR4_3;
> + break;
> + case HDMI_PICTURE_ASPECT_16_9:
> + out->flags |= DRM_MODE_FLAG_PAR16_9;
> + break;
> + case HDMI_PICTURE_ASPECT_NONE:
> + case HDMI_PICTURE_ASPECT_RESERVED:
> + default:
No need to specify HDMI_PICTURE_ASPECT_NONE &
HDMI_PICTURE_ASPECT_RESERVED if you use default.
> + out->flags |= DRM_MODE_FLAG_PARNONE;
> + break;
> + }
> +
> strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
> out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
> }
> @@ -1516,6 +1533,20 @@ int drm_mode_convert_umode(struct drm_display_mode *out,
> strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
> out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
>
> + /* Clearing picture aspect ratio bits from out flags */
> + out->flags &= ~DRM_MODE_FLAG_PARMASK;
> +
> + switch (in->flags & DRM_MODE_FLAG_PARMASK) {
> + case DRM_MODE_FLAG_PAR4_3:
> + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_4_3;
> + break;
> + case DRM_MODE_FLAG_PAR16_9:
> + out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9;
> + break;
> + default:
> + out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
For safety,
break;
> + }
> +
> out->status = drm_mode_validate_basic(out);
> if (out->status != MODE_OK)
> goto out;
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
