[PATCH i-g-t v3 09/13] igt_kms: Change PIPE_ANY behavior to mean unassigned, v2.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



None of the tests requires that a output bound to PIPE_ANY is assigned,
so don't do it. Fix the display commit to iterate over crtc's instead
oof outputs to properly disable pipes without outputs.

This also means that output->valid is only set after connecting a
output to a pipe, so no longer depend on it in for_each_connected_output
and similar macros.

New code should use PIPE_NONE to avoid confusion, PIPE_ANY is a
deprecated alias, and will be removed.

Changes since v1:
- Split out the property changes.
- Split out the commit changes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
 lib/igt_kms.c | 83 ++++++++++++++++++++++++++---------------------------------
 lib/igt_kms.h | 18 +++++++++++--
 2 files changed, 52 insertions(+), 49 deletions(-)

diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 6fd448493fe0..4397efbd2b2e 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -869,18 +869,20 @@ static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 	 */
 	_kmstest_connector_config_crtc_mask(drm_fd, connector, config);
 
+	if (!kmstest_get_connector_default_mode(drm_fd, connector,
+						&config->default_mode))
+		goto err3;
+
+	config->connector = connector;
+
 	crtc_idx_mask &= config->valid_crtc_idx_mask;
 	if (!crtc_idx_mask)
-		goto err3;
+		/* Keep config->connector */
+		goto err2;
 
 	config->pipe = ffs(crtc_idx_mask) - 1;
 
-	if (!kmstest_get_connector_default_mode(drm_fd, connector,
-						&config->default_mode))
-		goto err3;
-
 	config->encoder = _kmstest_connector_config_find_encoder(drm_fd, connector, config->pipe);
-	config->connector = connector;
 	config->crtc = drmModeGetCrtc(drm_fd, resources->crtcs[config->pipe]);
 
 	drmModeFreeResources(resources);
@@ -940,8 +942,13 @@ bool kmstest_probe_connector_config(int drm_fd, uint32_t connector_id,
 void kmstest_free_connector_config(struct kmstest_connector_config *config)
 {
 	drmModeFreeCrtc(config->crtc);
+	config->crtc = NULL;
+
 	drmModeFreeEncoder(config->encoder);
+	config->encoder = NULL;
+
 	drmModeFreeConnector(config->connector);
+	config->connector = NULL;
 }
 
 /**
@@ -1197,8 +1204,7 @@ static void igt_output_refresh(igt_output_t *output)
 	/* we mask out the pipes already in use */
 	crtc_idx_mask = output->pending_crtc_idx_mask & ~display->pipes_in_use;
 
-	if (output->valid)
-		kmstest_free_connector_config(&output->config);
+	kmstest_free_connector_config(&output->config);
 
 	ret = kmstest_get_connector_config(display->drm_fd,
 					   output->id,
@@ -1209,19 +1215,19 @@ static void igt_output_refresh(igt_output_t *output)
 	else
 		output->valid = false;
 
-	if (!output->valid)
-		return;
-
-	if (output->use_override_mode)
-		output->config.default_mode = output->override_mode;
-
-	if (!output->name) {
+	if (!output->name && output->config.connector) {
 		drmModeConnector *c = output->config.connector;
 
 		igt_assert_neq(asprintf(&output->name, "%s-%d", kmstest_connector_type_str(c->connector_type), c->connector_type_id),
 			       -1);
 	}
 
+	if (!output->valid)
+		return;
+
+	if (output->use_override_mode)
+		output->config.default_mode = output->override_mode;
+
 	LOG(display, "%s: Selecting pipe %s\n", output->name,
 	    kmstest_pipe_name(output->config.pipe));
 
@@ -1465,10 +1471,10 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		igt_output_t *output = &display->outputs[i];
 
 		/*
-		 * We're free to select any pipe to drive that output until
-		 * a constraint is set with igt_output_set_pipe().
+		 * We don't assign each output a pipe unless
+		 * a pipe is set with igt_output_set_pipe().
 		 */
-		output->pending_crtc_idx_mask = -1UL;
+		output->pending_crtc_idx_mask = 0;
 		output->id = resources->connectors[i];
 		output->display = display;
 
@@ -1537,7 +1543,7 @@ static void igt_display_refresh(igt_display_t *display)
         for (i = 0; i < display->n_outputs; i++) {
                 igt_output_t *a = &display->outputs[i];
 
-                if (a->pending_crtc_idx_mask == -1UL)
+                if (!a->pending_crtc_idx_mask)
                         continue;
 
                 for (j = 0; j < display->n_outputs; j++) {
@@ -1546,9 +1552,6 @@ static void igt_display_refresh(igt_display_t *display)
                         if (i == j)
                                 continue;
 
-                        if (b->pending_crtc_idx_mask == -1UL)
-                                continue;
-
                         igt_assert_f(a->pending_crtc_idx_mask !=
                                      b->pending_crtc_idx_mask,
                                      "%s and %s are both trying to use pipe %s\n",
@@ -1557,25 +1560,9 @@ static void igt_display_refresh(igt_display_t *display)
                 }
         }
 
-	/*
-	 * The pipe allocation has to be done in two phases:
-	 *   - first, try to satisfy the outputs where a pipe has been specified
-	 *   - then, allocate the outputs with PIPE_ANY
-	 */
-	for (i = 0; i < display->n_outputs; i++) {
-		igt_output_t *output = &display->outputs[i];
-
-		if (output->pending_crtc_idx_mask == -1UL)
-			continue;
-
-		igt_output_refresh(output);
-	}
 	for (i = 0; i < display->n_outputs; i++) {
 		igt_output_t *output = &display->outputs[i];
 
-		if (output->pending_crtc_idx_mask != -1UL)
-			continue;
-
 		igt_output_refresh(output);
 	}
 }
@@ -1585,12 +1572,11 @@ static igt_pipe_t *igt_output_get_driving_pipe(igt_output_t *output)
 	igt_display_t *display = output->display;
 	enum pipe pipe;
 
-	if (output->pending_crtc_idx_mask == -1UL) {
+	if (!output->pending_crtc_idx_mask) {
 		/*
-		 * The user hasn't specified a pipe to use, take the one
-		 * configured by the last refresh()
+		 * The user hasn't specified a pipe to use, return none.
 		 */
-		pipe = output->config.pipe;
+		return NULL;
 	} else {
 		/*
 		 * Otherwise, return the pending pipe (ie the pipe that should
@@ -1623,11 +1609,14 @@ static igt_plane_t *igt_pipe_get_plane(igt_pipe_t *pipe, enum igt_plane plane)
 static igt_output_t *igt_pipe_get_output(igt_pipe_t *pipe)
 {
 	igt_display_t *display = pipe->display;
-	igt_output_t *output;
+	int i;
+
+	for (i = 0; i < display->n_outputs; i++) {
+		igt_output_t *output = &display->outputs[i];
 
-	for_each_connected_output(display, output)
-		if (output->config.pipe == pipe->pipe)
+		if (output->pending_crtc_idx_mask == (1 << pipe->pipe))
 			return output;
+	}
 
 	return NULL;
 }
@@ -2283,9 +2272,9 @@ void igt_output_set_pipe(igt_output_t *output, enum pipe pipe)
 {
 	igt_display_t *display = output->display;
 
-	if (pipe == PIPE_ANY) {
+	if (pipe == PIPE_NONE) {
 		LOG(display, "%s: set_pipe(any)\n", igt_output_name(output));
-		output->pending_crtc_idx_mask = -1UL;
+		output->pending_crtc_idx_mask = 0;
 	} else {
 		LOG(display, "%s: set_pipe(%s)\n", igt_output_name(output),
 		    kmstest_pipe_name(pipe));
diff --git a/lib/igt_kms.h b/lib/igt_kms.h
index dc6be5e53b74..3531dc20b6e0 100644
--- a/lib/igt_kms.h
+++ b/lib/igt_kms.h
@@ -334,17 +334,31 @@ void igt_fb_set_size(struct igt_fb *fb, igt_plane_t *plane,
 
 void igt_wait_for_vblank(int drm_fd, enum pipe pipe);
 
+static inline bool igt_output_is_connected(igt_output_t *output)
+{
+	/* Something went wrong during probe? */
+	if (!output->config.connector)
+		return false;
+
+	if (output->config.connector->connection == DRM_MODE_CONNECTED)
+		return true;
+
+	return false;
+}
+
 static inline bool igt_pipe_connector_valid(enum pipe pipe,
 					    igt_output_t *output)
 {
-	return output->valid && (output->config.valid_crtc_idx_mask & (1 << pipe));
+	return igt_output_is_connected(output) &&
+	       (output->config.valid_crtc_idx_mask & (1 << pipe));
 }
 
 #define for_each_if(condition) if (!(condition)) {} else
 
 #define for_each_connected_output(display, output)		\
 	for (int i__ = 0;  i__ < (display)->n_outputs; i__++)	\
-		for_each_if (((output = &(display)->outputs[i__]), output->valid))
+		for_each_if (((output = &(display)->outputs[i__]), \
+			      igt_output_is_connected(output)))
 
 #define for_each_pipe(display, pipe)					\
 	for (pipe = 0; pipe < igt_display_get_n_pipes(display); pipe++)	\
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux