On 7/18/2016 3:46 PM, Tvrtko Ursulin wrote:
On 15/07/16 16:58, Goel, Akash wrote:
On 7/15/2016 5:21 PM, Tvrtko Ursulin wrote:
On 10/07/16 14:41, akash.goel@xxxxxxxxx wrote:
From: Akash Goel <akash.goel@xxxxxxxxx>
GuC firmware sends an interrupt to flush the log buffer when it
becomes half full. GuC firmware also tracks how many times the
buffer overflowed.
It would be useful to maintain a statistics of how many flush
interrupts were received and for which type of log buffer,
along with the overflow count of each buffer type.
Augmented i915_log_info debugfs to report back these statistics.
Signed-off-by: Akash Goel <akash.goel@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_debugfs.c | 26
++++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_guc_submission.c | 8 ++++++++
drivers/gpu/drm/i915/i915_irq.c | 1 +
drivers/gpu/drm/i915/intel_guc.h | 6 ++++++
4 files changed, 41 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index 3c9c7f7..888a18a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2538,6 +2538,30 @@ static int i915_guc_load_status_info(struct
seq_file *m, void *data)
return 0;
}
+static void i915_guc_log_info(struct seq_file *m,
+ struct drm_i915_private *dev_priv)
+{
+ struct intel_guc *guc = &dev_priv->guc;
+
+ seq_printf(m, "\nGuC logging stats:\n");
+
+ seq_printf(m, "\tISR: flush count %10u, overflow count %8u\n",
+ guc->log.flush_count[GUC_ISR_LOG_BUFFER],
+ guc->log.total_overflow_count[GUC_ISR_LOG_BUFFER]);
+
+ seq_printf(m, "\tDPC: flush count %10u, overflow count %8u\n",
+ guc->log.flush_count[GUC_DPC_LOG_BUFFER],
+ guc->log.total_overflow_count[GUC_DPC_LOG_BUFFER]);
+
+ seq_printf(m, "\tCRASH: flush count %10u, overflow count %8u\n",
+ guc->log.flush_count[GUC_CRASH_DUMP_LOG_BUFFER],
+ guc->log.total_overflow_count[GUC_CRASH_DUMP_LOG_BUFFER]);
+
+ seq_printf(m, "\tTotal flush interrupt count: %u\n",
+ guc->log.flush_interrupt_count);
+
+}
+
static void i915_guc_client_info(struct seq_file *m,
struct drm_i915_private *dev_priv,
struct i915_guc_client *client)
@@ -2611,6 +2635,8 @@ static int i915_guc_info(struct seq_file *m,
void *data)
seq_printf(m, "\nGuC execbuf client @ %p:\n",
guc.execbuf_client);
i915_guc_client_info(m, dev_priv, &client);
+ i915_guc_log_info(m, dev_priv);
+
/* Add more as required ... */
return 0;
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c
b/drivers/gpu/drm/i915/i915_guc_submission.c
index c1e637f..9c94a43 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -914,6 +914,14 @@ static void guc_read_update_log_buffer(struct
drm_device *dev)
log_buffer_state_local = *log_buffer_state;
buffer_size = log_buffer_state_local.size;
+ guc->log.flush_count[i] +=
log_buffer_state_local.flush_to_file;
+ if (log_buffer_state_local.buffer_full_cnt !=
+ guc->log.prev_overflow_count[i]) {
+ guc->log.prev_overflow_count[i] =
+ log_buffer_state_local.buffer_full_cnt;
+ guc->log.total_overflow_count[i]++;
Is log_buffer_state_local.buffer_full_cnt guaranteed to be one here? Or
you would need to increase total_overflow_count by its value?
buffer_full_cnt will not remain as one. Its a 4 bit counter, will be
incremented monotonically by GuC firmware on every new detection of
overflow, so will increase from 0 to 15 & then wrap around.
Hence have to use '!=' in the condition instead of '>'.
But can it happen that it jumps by more than one between being sampled
here? In which case you would need to replace:
guc->log.total_overflow_count[i]++;
by something like:
guc->log.total_overflow_count[i] +=
log_buffer_state_local.buffer_full_cnt - guc->log.prev_overflow_count[i];
(Doesn't handle the wrap though, just to illustrate my point.)
Actually logic in GuC firmware is such that overflow counter cannot
increment by more than 1 without Driver coming into picture in between,
by the virtue of flush interrupt.
But nevertheless the logic on Driver side should be like the way you
suggested.
Does this revised logic looks fine ?
if (log_buffer_state_local.buffer_full_cnt !=
guc->log.prev_overflow_count[i]) {
new_overflow = 1;
guc->log.total_overflow_count[i] +=
(log_buffer_state_local.buffer_full_cnt - guc->log.prev_overflow_count[i]);
if (log_buffer_state_local.buffer_full_cnt <
guc->log.prev_overflow_count[i])
guc->log.total_overflow_count[i] += 15;
log_buffer_state_local.buffer_full_cnt = guc->log.prev_overflow_count[i];
}
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
