Re: Sieve and upgrade to 3.4.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Thanks!
 
Absolutely in place, and being some TB of data I'm running zfs/zone clones of the originals to do my tests in place.
All the mailboxes and squatter data are going great after the upgrade (after binaries update I just had to run reconstruct -V max and then a complete squatter).
All shared mailboxes appear correctly (a part from some global sharings that were not visible before).
The only issue is about sieve scripts and the ./^ problem.
I read the document but didn't find anything about sieve and dots (also, the link to "see about sieve later" is not going anywhere...).
 
 
Sonicle S.r.l. : http://www.sonicle.com
Music: http://www.gabrielebulfon.com
eXoplanets : https://gabrielebulfon.bandcamp.com/album/exoplanets
 
 


Da: Simon Wilson via Info <info@xxxxxxxxxxxxxxxxxx>
A: info@xxxxxxxxxxxxxxxxxx
Data: 19 maggio 2021 13.43.40 CEST
Oggetto: Re: Sieve and upgrade to 3.4.1


OK... it would be helpful if you provided all information pertinent to your situation when you ask the original question - *how* have you upgraded, what have you tried, what relevant config options you have. Note that the 3.4 upgrade page contains warnings for in-place upgrades from 2.5 to 3+ with localparts with dots. Have you upgraded in place or via replication?

I upgraded our installation recently from 2.4 to 3.0.7... setup the new server, replicated users and mailboxes over the local network (which brought over sieve scripts), ran translatesieve to correct for a change in altnamespace (I went from off to on), and it has been fine with no issues, including users with a dot in the local address part of their name, for file paths and sieve scripts - all of which are on the filesystem with ^. 

More info needed... :)  then maybe someone may be able to help.

Rgds


----- Message from Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx> ---------
    Date: Wed, 19 May 2021 12:22:07 +0200 (CEST)
    From: Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx>
Reply-To: Info <info@xxxxxxxxxxxxxxxxxx>
Subject: Re: Sieve and upgrade to 3.4.1
      To: Info <info@xxxxxxxxxxxxxxxxxx>

Thanks, but my 2.5.11 systems are already both "unixhierarchysep: yes" and "altnamespace: yes".
Mailboxes like "user/a.b@xxxxxxxxxx" are seen as "user/a^b" in file system both in 2.5.11 and in 3.4.1.
Sieve scripts in 2.5.11 were seen as "a/a^b" in file system, while 3.4.1 starts fresh in "a/a.b", this is the only issue I'm facing.
 
Gabriele
 
 


Da: Simon Wilson via Info <info@xxxxxxxxxxxxxxxxxx>
A: info@xxxxxxxxxxxxxxxxxx
Data: 19 maggio 2021 11.33.15 CEST
Oggetto: Re: Sieve and upgrade to 3.4.1

 

As a start, see the following:

Upgrading to 3.4 — Cyrus IMAP 3.4.1 documentation

..see Section 5 on that page. 

Also note links from there to:

https://www.cyrusimap.org/imap/concepts/features/namespaces.html#imap-admin-namespaces-mode

https://www.cyrusimap.org/imap/reference/admin/sop/altnamespace.html#imap-switching-alt-namespace-mode

...and also see translatesieve — Cyrus IMAP 3.4.1 documentation 


Simon.

----- Message from Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx> ---------
    Date: Wed, 19 May 2021 09:34:57 +0200 (CEST)
    From: Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx>
Reply-To: Info <info@xxxxxxxxxxxxxxxxxx>
Subject: Sieve and upgrade to 3.4.1
      To: Info <info@xxxxxxxxxxxxxxxxxx>

Hi,
 
I'm testing the upgrade from 2.5.11 to 3.4.1.
I found that the sieve dirs under sieve/domain/s/domainname/g/username are changed: usernames with "." were previously as "^", now I find new folders with "." (eg. gabriele.bulfon instead of the old gabriele^bulfon folder).
This requires to publish all sieve rules!
Is there any way to mantain old folder names as it does with mailboxes?
 
Thanks,
Gabriele
 




----- End message from Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx> -----
 

___________
Simon Wilson
M: 0400 12 11 16




----- End message from Gabriele Bulfon via Info <info@xxxxxxxxxxxxxxxxxx> -----

___________
Simon Wilson
M: 0400 12 11 16
[Index of Archives]     [Cyrus SASL]     [Squirrel Mail]     [Asterisk PBX]     [Video For Linux]     [Photo]     [Yosemite News]     [gtk]     [KDE]     [Gimp on Windows]     [Steve's Art]

  Powered by Linux