Re: Load spikes when new email arrives

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 23 Jan 2013, francis picabia wrote:

> Thanks for the response.  I have been checking my iostat whenever there is
> a number of messages in the active queue.
>
> Here is a sample snapshot from a script I run (ignoring the first
> iostat output of averages):
>
> Active in queue: 193
> 12:47:01 up 5 days,  5:23,  6 users,  load average: 14.11, 9.22, 4.67
>
> Device:         rrqm/s   wrqm/s   r/s   w/s   rsec/s   wsec/s avgrq-sz avgqu-sz   await  svctm  %util
> sda5              3.25   281.00 19.75 129.50   654.00  3384.00    27.06 5.53   36.24   6.69  99.80
>
> svctm is about the same as when not under load and it went above 7 only
> once.
> Then there is this comment about the validity of tracking svctm:
> http://www.xaprb.com/blog/2010/09/06/beware-of-svctm-in-linuxs-iostat/
>
> %util is often reaching close to %100 when there is a queue to process.
>
> sda5 is where the cyrus mail/imap lives.  Our account names all begin with
> numbers, so almost all mail accounts are under the q folder.

Okay, I didn't realize svctm could be suspect, although I guess that makes 
sense in a RAID array.  What about your await times?  Does await increase 
during peak loads?

It seems pretty clear from iostat that you are IO bound on writes during 
mail delivery.  As Vincent said in his reply, RAID5 performs poorly during 
writes.  Each write actually consumes 4 disk operations (read old data, 
read old parity, write new data, write new parity).  If you can live with 
the slight additional risk, turn on write caching on the Perc 5/i if you 
haven't already.  I think they call it "write-back" versus 
"write-through".

If you can handle it, you would probably be a lot happier converting that 
RAID5 set to RAID10.  You'll lose a disk worth of capacity, but get double 
the write performance.

However, what is your real goal?  Do you want to deliver mail more 
quickly, or do you want to reduce your load average?  You can probably 
reduce your load average and perhaps gain a bit of speed by tweaking the 
lmtp maxchild limit.  If you really need to deliver mail more quickly, 
then you need to throw more IOPS at it.

Let's keep this discussion going!  There are lots of ways to tune for 
performance.  I've probably missed some.  :)

 	Andy
----
Cyrus Home Page: http://www.cyrusimap.org/
List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/
To Unsubscribe:
https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus


[Index of Archives]     [Cyrus SASL]     [Squirrel Mail]     [Asterisk PBX]     [Video For Linux]     [Photo]     [Yosemite News]     [gtk]     [KDE]     [Gimp on Windows]     [Steve's Art]

  Powered by Linux