Dan and David, I took the liberty to add you to the discussion as draft-thaler-iftype-reg could be a way forward.
David, thank you for your review and the raised point.
Tom, and Magnus, thank you as well for being part of the discussion.
David, I see your point about referring to an 'outdated hence invalid' reference. I think we all agree that we need to have a IANA registry of ifTypes per draft-thaler-iftype-reg.
Nevertheless, I do not want to delay this document until that registry is created by the IANA as at least one other document depends on this one. Furthermore, I am unsure about the will of Dave & Dan to push forward their I-D.
Med, can you have a -06 revision with:
- clearer abstract (basically copy & paste of the 1st paragraph of the introduction) with the specific limitations / restrictions pointed by the reviews (for example "... containing the limited and incomplete collection of IANA...")
- what about adding some text about "Upon the create of a IANA registry of ifType, then an update of this document will be required". Unsure whether it has ever been used in a RFC though.
But, at least fix the abstract and be more restrictive on the 'value' of the current ifType MIB
Hope this will allow the document to progress
-éric
On 09/05/2019, 15:46, "Black, David" <David.Black@xxxxxxxx> wrote:
> [Med] The intent of the draft is to reflect the current registered tunnels types.
...
> [Med] Registering new tunnel types is not in the scope set for this draft.
I understand that, but as stated in the review, I don't think that it's the best course of action. The email below appears to reject all of the IETF Last Call comments in the review and in particular presents the scope of the draft as fixed and unchangeable; that's unfortunate. On that basis, I will agree to disagree and leave these IETF Last Call concerns to the ADs to sort out.
Thanks, --David
> -----Original Message-----
> From: mohamed.boucadair@xxxxxxxxxx
> <mohamed.boucadair@xxxxxxxxxx>
> Sent: Thursday, May 9, 2019 3:50 AM
> To: Black, David; tsv-art@xxxxxxxx
> Cc: softwires@xxxxxxxx; ietf@xxxxxxxx; draft-ietf-softwire-iftunnel.all@xxxxxxxx
> Subject: RE: Tsvart last call review of draft-ietf-softwire-iftunnel-04
>
>
> [EXTERNAL EMAIL]
>
> Hi David,
>
> Thank you for the review.
>
> Please see inline.
>
> Cheers,
> Med
>
> > -----Message d'origine-----
> > De : David Black via Datatracker [mailto:noreply@xxxxxxxx]
> > Envoyé : mercredi 8 mai 2019 00:46
> > À : tsv-art@xxxxxxxx
> > Cc : softwires@xxxxxxxx; ietf@xxxxxxxx; draft-ietf-softwire-
> > iftunnel.all@xxxxxxxx
> > Objet : Tsvart last call review of draft-ietf-softwire-iftunnel-04
> >
> > Reviewer: David Black
> > Review result: Not Ready
> >
> > This document has been reviewed as part of the transport area review
> team's
> > ongoing effort to review key IETF documents. These comments were
> written
> > primarily for the transport area directors, but are copied to the document's
> > authors and WG to allow them to address any issues raised and also to the
> > IETF discussion list for information.
> >
> > When done at the time of IETF Last Call, the authors should consider this
> > review as part of the last-call comments they receive. Please always CC
> > tsv-art@xxxxxxxx if you reply to or forward this review.
> >
> > This draft defines a YANG module for tunnel types based on the MIB-2
> > tunnel type registry maintained by IANA.
> >
> > My fundamental concern with this draft is that the MIB-2 tunnel type
> > registry is seriously incomplete and out of date, as there are a large
> > number of tunnel types that aren't included in that registry, e.g., IPsec
> > tunnel-mode AMT tunneling. In its current form, that registry does not
> > appear to be a good starting point for specifying YANG management of
> > tunnels.
> >
> > A limited justification that I could envision for defining this YANG module
> > would be to use it for mechanical translations to YANG of existing MIBs
> > that use MIB-2 tunnel types - if that's the justification, then it would need
> > to be clearly stated in an applicability statement within this draft,
>
> [Med] The intent of the draft is to reflect the current registered tunnels
> types. This is mentioned in the introduction:
>
> This document specifies the initial version of the iana-tunnel-type
> ^^^^^^^^^^^^^^
> YANG module identifying tunnel interface types. The module reflects
> ^^^^^^^^
> IANA's registry maintained at [TUNNELTYPE-IANA-REGISTRY]. The latest
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> revision of this module can be obtained from the IANA web site.
>
> and the
> > discussion of extension of this YANG module would need to be aligned
> with
> > that limited applicability.
>
> [Med] This is an IANA-maintained module. That is, when a new tunnel type is
> registered, the module will be automatically updated to include that new
> type identity:
>
> When this registry is modified, the YANG module iana-tunnel-type
> must be updated as defined in RFCXXXX.
>
> >
> > The proverbial "right thing to do" would be to update both the MIB-2
> tunnel
> > type registry and this draft with all of the currently known tunnel types.
>
> [Med] Registering new tunnel types is not in the scope set for this draft. It is
> up to the documents defining these tunnel types or making use of them to
> make a request to IANA. For example, this is the approach followed in
> softwire wg for at least three tunnel types (16, 17, 18).
>
> > The references section of draft-ietf-tsvwg-rfc6040update-shim
> > (https://datatracker.ietf.org/doc/draft-ietf-tsvwg-rfc6040update-shim/)
> > may help in identifying tunnel protocols that should be included.
> >
> > A minor concern involves the use of RFC 8085 as the reference for UDP
> > tunnels; while that's certainly better than the existing use of RFC 4087, due
> > to the extensive design guidance in RFC 8085, designers of UDP-
> encapsulated
> > tunnel protocols ought to be encouraged to register their protocols as
> > separate
> > tunnel types (e.g., so the network operator has some idea of what the UDP
> > tunnel is actually being used for). This draft ought to encourage tunnel
> > protocol designers to register their own tunnel types in preference to
> reuse
> > of the UDP tunnel type, including placing text in the IANA tunnel type
> > registry and this YANG module to encourage that course of action.
> >
>
> [Med] Wouldn't that recommendation be better added to documents such
> as: https://tools.ietf.org/html/draft-thaler-iftype-reg-02?
