Re: [mpls] Opsdir last call review of draft-ietf-mpls-sfc-encapsulation-02

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Andy,

On Feb 21, 2019, at 1:06 PM, Andrew G. Malis <agmalis@xxxxxxxxx> wrote:

Carlos,

Many thanks for your review! I'm also including the SFC WG on my reply.

Thanks for the quick response, and for considering the comments!

I enjoyed reading this document — please see below.


Comments inline.

On Wed, Feb 20, 2019 at 10:58 PM Carlos Pignataro <cpignata@xxxxxxxxx> wrote:
Reviewer: Carlos Pignataro
Review result: Has Issues

Reviewer: Carlos Pignataro
Review Result: Has Issues

I have reviewed this document as part of the Operational directorate's
ongoing effort to review all IETF documents being processed by the IESG.  These
comments were written with the intent of improving the operational aspects of
the IETF drafts. Comments that are not addressed in last call may be included
in AD reviews during the IESG review.  Document editors and WG chairs should
treat these comments just like any other last call comments.

This document is highly readable, includes very clear textual descriptions, and
is very well organized. Easy to read in its simplicity. However, it would
benefit from a more explicit connection to the transport encap mechanics from
RFC 8300 (e.g., S4, S6.1). Specifically, I'd recommend adding a Figure or an
SFF NSH Mapping Table example, to depict and/or exemplify the SFF function.

I'm trying to envision what would make a good figure here. We could add an additional line to Table 1 of RFC 8300 and reference that table:

      +------+------+---------------------+-------------------------+
      | SPI  | SI   | Next Hop(s)         | Transport Encapsulation |
      +------+------+---------------------+-------------------------+
      | 25   | 220  | Label 5467          | MPLS                    |
      +------+------+---------------------+-------------------------+

Is that what you had in mind? If not, I'm open to other suggestions.

If you think it helps, this would be a good addition.

 

>From an Operational standpoint, the document seems largely appropriate in terms
of dataplane considerations. Some key considerations are explicitly out of
scope:
   The method used by the downstream receiving node to advertise SFF
   Labels to the upstream sending node is out of scope of this document.

This really seems to mean that, with the simple definition in this
Informational document, interoperable implementations cannot yet exist. If
there is no mechanism to advertise the SFF Label or to manage the semantics of
this particular label, how will it know? Static configuration, which is not
covered anyway, is not in my humble opinion a manageable scalable approach.

Actually, while it is outside the scope of this document, it is within the scope of draft-ietf-bess-nsh-bgp-control-plane, and text is being added to the next revision of that draft to show how it can be used to signal the encapsulation defined here. This was worked out after this draft was forwarded to the IESG, but we can now add a reference to that draft seeing as we'll be doing a post-last-call update.

I think that will help, as an Informative “one embodiment” type of link.

 

Title: MPLS Encapsulation For The SFC NSH

RFC 8300 makes an explicit distinction between the terms 'encapsulation' and
'transport encapsulation' (see e.g., Figure 1, Section 1.5 5., and Section 4 of
RFC 8300).

It seems to me that this is the "MPLS Transport Encapsulation for the SFC NSH"

Thanks, we'll fix that.
 

2.  MPLS Encapsulation Using an SFF Label

Similarly, "2. MPLS Transport Encapsulation Using an SFF Label"

   The encapsulation is a standard MPLS label stack [RFC3032] with an
   SFF Label at the bottom of the stack, followed by a NSH as defined by
   [RFC8300] and the NSH payload.

Insteadf of "NSH payload" I think "orignal packet" is meant.

RFC 8300 uses both "payload" and "original packet/frame", but the latter more than the former. So we can change "payload" to "original packet/frame".
 

Also, this encapsulation is Underdefined: What is the value of TTL? TC?

I've been looking back at other related RFCs (such as PW and IP VPN label definitions) and they're also mostly silent on these values. I did find the following in RFC 6073:

   The setting of the TTL of the PW MPLS
   label is a matter of local policy on the originating PE, but SHOULD
   be set to 255.

Regarding the TC, we can follow the example of RFC 6391:

   This document does not define a use for the Traffic Class (TC) field
   [RFC5462] (formerly known as the Experimental Use (EXP) bits
   [RFC3032]) in the flow label.  Future documents may define a use for
   these bits; therefore, implementations conforming to this
   specification MUST set the TC field to zero at the ingress and MUST
   ignore them at the egress.

Do you have any alternative suggestions?

These two approaches sounds good to me. And Ack to the other previous responses.

 

   Much like a pseudowire label, an SFF Label is allocated by the
   downstream receiver of the NSH from its per-platform label space.

A PW Label is more restrictive. RFC 8077 says it MUST be allocated as
per-platform:

   egress LSR only.  Note that the PW label must always be at the bottom
   of the packet's label stack, and labels MUST be allocated from the
   per-platform label space.

Is this the case for the SFF Label as well? If so, what is the implication of
the MUST? If not, why is it different than other equivalent similar labels?

We can change the text to:

 Much like a pseudowire label, an SFF Label MUST be allocated by the downstream receiver of the NSH from its per-platform label space, since the meaning of the label is identical independent of which incoming interface it is received [RFC3031].


That’s a great improvement.


   2.  Push the SFF Label to identify the desired SFF in the receiving
       MPLS node.

TTL value? 1? 2? 255 for GTSM? GTSM RFC 5082 could be used here.

As I noted above, 255, although I used RFC 6073 as my source rather than 5082. We'll add that here as well.


Sounds good.
These protocols use 5082 in one form or another: https://datatracker.ietf.org/doc/rfc5082/referencedby/


4.  Operations, Administration, and Maintenance (OAM) Considerations

   OAM at the SFC Layer is handled by SFC-defined mechanisms [RFC8300].
   However, OAM may be required at the MPLS transport layer.  If so,
   then standard MPLS-layer OAM mechanisms such as the Generic
   Associated Channel [RFC5586] label may be used.

RFC 5586 is _not_ an OAM mechanism. It is an associated channel creation
mechanism, over which OAM could be carried.

Thus, what traditional MPLS OAM can be carried here? Things like RFC 4379 / RFC
8029 would need the definition of an SFF Label FEC (which does not exist).
Which other one? IP/ICMP seems of very limited value.

That's a good point about RFC 5586. The intention is that the MPLS OAM would be at the transport label layer above the SFF label, so most any MPLS-layer OAM would be applicable. So how about rewording to make that more clear:

OAM at the SFC Layer is handled by SFC-defined mechanisms [RFC8300]. However, OAM may be required at the MPLS transport layer.  If so, then standard MPLS-layer OAM mechanisms may be used at the transport label layer (the labels above the SFF label).

Looks good to me, thank you.

 

6.  Security Considerations

Have you considered the use of GTSM?

No, we hadn't. Can you point me to any examples of GTSM being used in an MPLS or PW context?

Yes, see above.

 

8.  References

   [RFC7665]  Halpern, J., Ed. and C. Pignataro, Ed., "Service Function
              Chaining (SFC) Architecture", RFC 7665,
              DOI 10.17487/RFC7665, October 2015,
              <https://www.rfc-editor.org/info/rfc7665>.

SHould RFC 7665 be Normative? It defines the "SFF" which is quite central to
understanding this document.

Good point. It was there because 7665 is an Informational RFC, but RFC 8067 does allow normative references to informational RFCs, so I'll move it.
 

Thank you.


Other Nits and Editorials:

   SFF Labels are similar to other service labels at the bottom of an
   MPLS label stack that denote the contents of the MPLS payload being
   other than IP, such as a layer 2 pseudowire, an IP packet that is
   routed in a VPN context with a private address, or an Ethernet
   virtual private wire service.

This says "being other than IP, such as IP", which seems to be
self-contradictory :-)

:-)

How about we change "other than IP," to "other than a normally routed IP packet”,

That would disambiguate it.

Thanks again.

To me, the control plane / advertisement was the most important operationally-relevant comment.

Thanks,

Carlos.


Thanks again,
Andy


[Index of Archives]     [IETF Annoucements]     [IETF]     [IP Storage]     [Yosemite News]     [Linux SCTP]     [Linux Newbies]     [Mhonarc]     [Fedora Users]

  Powered by Linux