On 12/20/16 6:26 AM, Jens Toftgaard Petersen wrote:
Hi Robert,
Thanks for your clarification of normative references to work in progress.
I would prefer to keep the reference as in the updated version -09:
"The FPs in such a scenario should behave as Backbone
Routers (6BBR) as defined in [I-D.ietf-6lo-backbone-router]."
Are you OK with that?
Maybe. I'm not the expert here, so all I can do is ask (what are
hopefully useful) questions:
Here's one way to help figure this out: Would you be ok deleting the
sentence and the reference? (I'm not asking you to do that, just to
consider what it would mean to the resulting set of implementations if
you did.)
If you think people will build the right software with that sentence
missing, and you'll get the interoperability you're aiming for, then
it's fine as an Informative reference. This would be the case if what
you're really doing with that sentence is saying "other documents in the
base protocol this is building on require you to behave this way, we're
just pointing at that here to remind you of that fact".
If that's going to leave implementers guessing at what their
implementation is supposed to do, and interoperability will suffer, then
it's normative. (What you're really doing with that sentence is telling
the implementers something _new_ - that they SHOULD behave as a 6BBR in
this situation, and nothing else tells them to do that, and the
reference is here to tell them how to do that).
Alternatively, if it's just fine that some large subset _doesn't_ behave
as a 6BBR, then its fine the way it is. You might consider saying "One
good way for an FP can behave in such scenarios is as a Backbone
Router..." instead, to make it clearer that this is just informational
guidance rather than something that would affect interoperability in the
resulting implementation base.
Either way, I'm happy leaving it up to you and your ADs at this point.
Best regards,
Jens
-----Original Message-----
From: Robert Sparks [mailto:rjsparks@xxxxxxxxxxx]
Sent: 17. december 2016 00:31
To: Jens Toftgaard Petersen <jtp@xxxxxx>; General Area Review Team <gen-art@xxxxxxxx>; ietf@xxxxxxxx; 6lo@xxxxxxxx; draft-ietf-6lo-dect-ule.all@xxxxxxxx
Subject: Re: Gen-art LC review: draft-ietf-6lo-dect-ule-08
Just one comment at the end:
On 12/15/16 4:04 PM, Jens Toftgaard Petersen wrote:
Hi Robert,
Many thanks for your review. See my comments and answers inline below.
Best regards,
Jens
-----Original Message-----
From: Robert Sparks [mailto:rjsparks@xxxxxxxxxxx]
Sent: 28. november 2016 21:22
To: General Area Review Team <gen-art@xxxxxxxx>; ietf@xxxxxxxx;
6lo@xxxxxxxx; draft-ietf-6lo-dect-ule.all@xxxxxxxx
Subject: Gen-art LC review: draft-ietf-6lo-dect-ule-08
I am the assigned Gen-ART reviewer for this draft. The General Area Review Team (Gen-ART) reviews all IETF documents being processed by the IESG for the IETF Chair. Please treat these comments just like any other last call comments.
For more information, please see the FAQ at
<http://wiki.tools.ietf.org/area/gen/trac/wiki/GenArtfaq>.
Document: draft-ietf-6lo-dect-ule-08
Reviewer: Robert Sparks
Review Date: 28 Nov 2016
IETF LC End Date: 02 Dec 2016
IESG Telechat date: 15 Dec 2016
Summary: Ready with nits
Nits/editorial comments:
First, forgive me, but I need to grumble a little bit:
The way this document approaches standardization makes me very uncomfortable.
The language is passive and relies on inference to the point that it risks being vague. If this review were earlier in the document's life-cycle, I would strongly suggest a complete restructure focusing on explicitly specifying what the implementation is supposed to do.
But, the document has had several reviewers who didn't trip up on this point, and the working group believes it is implementable, so I'm going to set that aside and provide some concrete suggestions for removing some nits from the existing text.
In document order:
1) In section 2.1 "This draft defines 6LoPAN as one of the possible protocols to negotiate". That's not what this draft appears to do. Rather, it defines behavior once this 6LoPAN over DECT ULE has been negotiated. Some other document is defining the negotiation. I suggest replacing the sentence with "[TS102.939-1] defines this negotiation and specifies an Application Protocol Identifier of 0x06 for 6LowPAN. This document defines the behavior of that Application Protocol".
[Jens]: Very good comment and suggested wording. Is implemented in
revision -09
2) The "not recommended" in the last sentence of 2.3 looks like it
should be a
2119 keyword (NOT RECOMMENDED). Similarly, the "shall" in the last sentence of the first paragraph of 2.4 looks like it should be a SHALL (consider using MUST instead).
[Jens]: I agree. Is implemented in revision -09
3) At the mention of LOWPAN_IPHC in the second paragraph of 2.4, consider referencing RFC6282. It's not clear what the sentence is really trying to convey, though. "all the requirements" is very vague - can you point to a specific requirement list somewhere? "It is expected" implies that you believe there's a chance that it might fail. Could the sentence be removed (you cover this in 3.2) or be replaced with a more direct statement?
[Jens]: Agreed, is covered in section 3.2. Will be removed in revision
-09
4) In the first section of 3.1 you have "The PP MUST be pageable".
Interestingly, the word "pageable" does not yet appear anywhere in the RFC series. Please add a reference into the ETSI docs that will lead the reader to a definition.
[Jens]: I don't think we have definition of the term we can refer to. Will change to an explanatory wording in revision -09.
5) In the last paragraph of 3.2 (before 3.2.1), third sentence, you
introduce using the multi-link subnet approach. Please either add a
reference to
RFC4903
here, or point forward to section 3.3.
[Jens]: A reference to RF4903 added in revision -09
6) In section 3.2.1, third paragraph, you say addresses are derived "similar to the guidance of [RFC4291]. I don't believe that is sufficient. Perhaps you should say "following the guidance in Appendix A of [RFC4291]"?
[Jens]: Yes, your suggestion is more accurate. Will be done revision -09.
7) The last paragraph of 3.3 says "The FPs operation role in such scenario are rather like Backbone Routers (6BBR) than 6LBR, as per [I-D.ietf-6lo-backbone-router]." Is this trying to _specify_ the behavior of the FP in this scenario? If not, it's unclear what the sentence is trying to accomplish. If so, then the sentence should be "The FPs in such a scenario behave as Backbone Routers (6BBR) as defined in [I-D.ietf-6lo-backbone-router]." And that reference should be normative, rather than informative.
[Jens]: I agree the wording is bit vague, but I believe we cannot
refer to work in progress [I-D.ietf-6lo-backbone-router] in a
normative way. I will tightening the wording revision -09
You _can_ refer normatively to a work in progress (and I think it may still be the right thing to do here). The consequence is that this document would stay in the RFC Editor's queue in a state known as MISSREF (for missing reference) until the referenced document was approved for publication as an RFC. You can see examples of this at work on https://www.rfc-editor.org/current_queue.php.