Dear RoHC
ers,
I am facing ambiguity
regarding (Profile 0x104) classification in RoHC V2
Profiles.
1. On what basis we will
choose Profile 0x104 in Version-2 Profiles?
Because, as mentioned in RFC 5225, all the Profiles present
in
Rohc Version-2 support arbitrary number of IP Levels. So how do we differentiate
between Profile0x104 and
rest
of Profiles (i.e, like Profile0x101 , Profile0x102 , Profile0x103 etc) in V2 to
classify which Profile the
Packet stream belongs
to?
2. Is the
interpretation correct?
a)
Profile 0x104 is chosen when the Input packet contains only IP headers and not
ended by any RTP/UDP/ESP/TCP headers. (or)
b) Profile 0x104 is chosen only
when no other V2 profile is supported by the compressor entity other than
Profile 0x104.
Pls share your valuble thoughts regarding the same.
Thanks,
Pradeep.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
_______________________________________________ Ietf@xxxxxxxx https://www.ietf.org/mailman/listinfo/ietf