Hi All,
I have a query in the draft Managed Objects for ATM over
Packet Switched Network (draft-ietf-pwe3-pw-atm-mib-05.txt) mentioned
below. Can you please reply to that as early as possible.
The pwAtmCfgTable consists of MaxCellConctenation,
FarEndMaxCellConcatenation, Timeout mode and ClpQosMapping.
The time out value object for MaxCellConcatenation is not defined in
this table. Can you please let me know whether it is missed otherwise
from where I can get it.
Reference:
pwAtmCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwAtmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies generic information for an ATM PW
to be carried over PSN in any mode."
::= { pwAtmObjects 5 }
pwAtmCfgEntry OBJECT-TYPE
SYNTAX PwAtmCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a set of parameters for
the ATM PW that needs to be adapted and carried
over PSN. This table is indexed by pwIndex from
pwTable. An entry is created for every newly pwIndex
in the pwTable. Unless otherwise specified, all
read-write objects in this table MAY
be changed when the PW is defined as not active
and all RW objects values must persist
after reboot"
REFERENCE
"See [PWMIB] "
INDEX { pwIndex }
::= { pwAtmCfgTable 1 }
PwAtmCfgEntry ::= SEQUENCE {
pwAtmCfgMaxCellConcatenation Unsigned32,
pwAtmCfgFarEndMaxCellConcatenation Unsigned32,
pwAtmCfgTimeoutMode INTEGER,
pwAtmClpQosMapping TruthValue
}
Thanks & Regards,
Murugesan R
_______________________________________________
Ietf@xxxxxxxx
https://www.ietf.org/mailman/listinfo/ietf