The IESG has approved the following document: - 'MPL Parameter Configuration Option for DHCPv6' (draft-ietf-roll-mpl-parameter-configuration-08.txt) as Proposed Standard This document is the product of the Routing Over Low power and Lossy networks Working Group. The IESG contact persons are Alvaro Retana, Alia Atlas and Deborah Brungard. A URL of this Internet Draft is: https://datatracker.ietf.org/doc/draft-ietf-roll-mpl-parameter-configuration/ Technical Summary This draft defines a way to configure a parameter set of MPL (Multicast Protocol for Low power and Lossy Networks) via DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured network-wide because it should be identical for each MPL forwarder in an MPL domain. Using the MPL Parameter Configuration Option defined in this document, a network can be configured with a single set of MPL parameters easily. Working Group Summary This document was reviewed in ROLL and DHC WGs. During WG Last Call there were no comments, but the Chairs considered it reached consensus in previous threads. Document Quality The DHC Chair Bernie Volz reviewed the document and was ok with the proposed option format. The document has also been through the review of the shepherd, the AD, etc. Personnel Responsible Area Director: Alvaro Retana Document Shepherd: Ines Robles
