The IESG has approved the following document: - 'Attribute-Value Pairs For Provisioning Customer Equipment Supporting IPv4-Over-IPv6 Transitional Solutions' (draft-ietf-dime-4over6-provisioning-06.txt) as Proposed Standard This document is the product of the Diameter Maintenance and Extensions Working Group. The IESG contact persons are Stephen Farrell, Benoit Claise and Joel Jaeggli. A URL of this Internet Draft is: https://datatracker.ietf.org/doc/draft-ietf-dime-4over6-provisioning/ Technical Summary During the transition from IPv4 to IPv6, customer equipment may have to support one of the various transition methods that have been defined for carrying IPv4 packets over IPv6. This document enumerates the information that needs to be provisioned on a customer edge router to support a list of transition techniques based on tunneling IPv4 in IPv6, with a view to defining reusable components for a reasonable transition path between these techniques. To the extent that the provisioning is done dynamically, AAA support is needed to provide the information to the network server responsible for passing the information to the customer equipment. This document specifies Diameter (RFC 6733) attribute-value pairs to be used for that purpose. Working Group Summary Don't think so. Can't tell from shepherd write-up. I don't believe there's anything odd here. Document Quality Quality seems fine. Not sure if implementations are planned. Personnel The document shepherd is Lionel Morand. The responsible Area Director is Stephen Farrell.
