The IESG has received a request from the Diameter Maintenance and Extensions WG (dime) to consider the following document: - 'Attribute-Value Pairs For Provisioning Customer Equipment Supporting IPv4-Over-IPv6 Transitional Solutions' <draft-ietf-dime-4over6-provisioning-03.txt> as Proposed Standard The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the ietf@ietf.org mailing lists by 2015-07-20. Exceptionally, comments may be sent to iesg@ietf.org instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract During the transition from IPv4 to IPv6, customer equipment may have to support one of the various transition methods that have been defined for carrying IPv4 packets over IPv6. This document enumerates the information that needs to be provisioned on a customer edge router to support a list of transition techniques based on tunneling IPv4 in IPv6, with a view to defining reusable components for a reasonable transition path between these techniques. To the extent that the provisioning is done dynamically, AAA support is needed to provide the information to the network server responsible for passing the information to the customer equipment. This document specifies Diameter (RFC 6733) attribute-value pairs to be used for that purpose. The file can be obtained via https://datatracker.ietf.org/doc/draft-ietf-dime-4over6-provisioning/ IESG discussion can be tracked via https://datatracker.ietf.org/doc/draft-ietf-dime-4over6-provisioning/ballot/ No IPR declarations have been submitted directly on this I-D.
