The IESG has received a request from the Routing Over Low power and Lossy networks WG (roll) to consider the following document: - 'MPL Parameter Configuration Option for DHCPv6' <draft-ietf-roll-mpl-parameter-configuration-04.txt> as Proposed Standard The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the ietf@ietf.org mailing lists by 2015-06-30. Exceptionally, comments may be sent to iesg@ietf.org instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract This draft defines a way to configure a parameter set of MPL (Multicast Protocol for Low power and Lossy Networks) via DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL forwarder in an MPL domain. Using the MPL Parameter Configuration Option defined in this document, a network can be configured with a single set of MPL parameter easily. The file can be obtained via https://datatracker.ietf.org/doc/draft-ietf-roll-mpl-parameter-configuration/ IESG discussion can be tracked via https://datatracker.ietf.org/doc/draft-ietf-roll-mpl-parameter-configuration/ballot/ No IPR declarations have been submitted directly on this I-D.
