The IESG has approved the following document: - 'Ethernet in the First Mile Copper (EFMCu) Interfaces MIB' (draft-ietf-opsawg-rfc5066bis-07.txt) as Proposed Standard This document is the product of the Operations and Management Area Working Group. The IESG contact persons are Benoit Claise and Joel Jaeggli. A URL of this Internet Draft is: http://datatracker.ietf.org/doc/draft-ietf-opsawg-rfc5066bis/ Technical Summary This document updates RFC 5066. It amends that specification by informing the internet community about the transition of the EFM-CU- MIB module from the concluded IETF Ethernet Interfaces and Hub MIB Working Group to the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group. This document provides an updated security considerations section for IF-CAP-STACK-MIB Working Group Summary The document was much simplified during the Working Group discussions, and now contains only information about the transfer of the Ethernet specific MIB module to the IEEE and describes the fact that the IF-CAP-STACK-MIB remains under IETF control. Document Quality The document does not define a new protocol, but provides information about the future of the MIB modules defined in RFC 5066 Personnel Dan Romascanu is the Document Shepherd. Benoit Claise is the Responsible Area Director. RFC Editor Note OLD: The current version of IEEE8023-EFM-CU-MIB, defined in IEEE Std 802.3.1-2013, has MODULE-IDENTITY of ieee8023efmCuMIB with an object identifier allocated under the { org ieee standards-association- numbers-series-standards lan-man-stds ieee802dot3 ieee802dot3dot1mibs } sub-tree. NEW: The current version of IEEE8023-EFM-CU-MIB, defined in IEEE Std 802.3.1-2013, has MODULE-IDENTITY of ieee8023efmCuMIB with an object identifier allocated under the { iso(1) iso-identified-organization(3) ieee(111) standards-association-numbered-series-standards(2) lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) } sub-tree.
