A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Supporting explicit-path per destination in Path Computation Element Communication Protocol (PCEP) P2MP Path Request Message.
Author(s) : Dhruv Dhody
Udayasree Palle
Filename : draft-dhody-pce-pcep-p2mp-per-destination-01.txt
Pages : 13
Date : 2012-02-15
The ability to determine paths of point-to-multipoint (P2MP)
Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS)
Traffic Engineering Label Switched Paths (TE LSPs) is one the key
requirements for Path Computation Element (PCE). [RFC6006] and
[PCE-P2MP-PROCEDURES] describes these mechanisms for intra and inter
domain environment.
Explicit Path in this document refers to the configured list of
network elements that MUST be traversed or MUST be excluded in the
final path computation. This should not be confused with the RSVP
terminology. Network elements can further be strict or loose hop.
This document describes extensions to the PCE communication Protocol
(PCEP) to define explicit-path per destination in P2MP context.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-dhody-pce-pcep-p2mp-per-destination-01.txt
Internet-Drafts are also available by anonymous FTP at:
ftp://ftp.ietf.org/internet-drafts/
This Internet-Draft can be retrieved at:
ftp://ftp.ietf.org/internet-drafts/draft-dhody-pce-pcep-p2mp-per-destination-01.txt
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www.ietf.org/mailman/listinfo/i-d-announce
Internet-Draft directories: http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
