RE: [mpls] Last Call: <draft-ietf-mpls-tp-on-demand-cv-06.txt> (MPLSOn-demand Connectivity Verification and Route Tracing) toProposed Standard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yoshinori,

	The DSMAP/DDMAP was explicitly added to make it possible
to direct the implementation to respond to the echo request as
if it were directed to a specific interface (either the egress
or ingress interface).

	This interface-specific echo request is what I believe 
folks are referring to as "per-interface."

	This - in effect - is the primary use for the object in
this draft, so any explicit statement to the effect that this 
is the case would be redundant.

	While the object includes fields for both an ingress and 
egress interface, when being used to direct the implementation
to respond as if the echo request were directed to a specific
interface, only one of these fields would contain valid info.

	It is possible that both interface numbers are valid.  In
this case, the object cannot be used for what you are calling a
"per-interface" echo request.  However, this case may be useful
if - for example - the intention is to verify that the LSP is
using this particular interface mapping at this node (i.e. - 
the request is attempting to ascertain if this is the correct 
mapping for the LSP).

	All of this is fairly intuitive to anyone who has read
the draft and is reasonably familiar with the technology and
protocols involved.  This draft is a protocol specification,
not a tutorial.

	As for what may be said in any other draft that is still
in the process of being written, that is an issue that is not
in scope for this draft.

--
Eric


-----Original Message-----
From: mpls-bounces@ietf.org [mailto:mpls-bounces@ietf.org] On Behalf Of Yoshinori Koike
Sent: Thursday, August 25, 2011 12:35 PM
To: ietf@ietf.org
Cc: mpls@ietf.org; 'IETF-Announce'
Subject: Re: [mpls] Last Call: <draft-ietf-mpls-tp-on-demand-cv-06.txt> (MPLSOn-demand Connectivity Verification and Route Tracing) toProposed Standard

Hi,

I would like to propose that this draft explicitly stipulate whether or 
not it covers per-interface model. I think it is essential to avoid 
confusion and clarify the appropriate I-D to discuss OAM solutions for 
the per-interface model.

"Per-interface model" is one of the two OAM maintenance models in 
MPLS-TP networks which is specified in section 3 of 
draft-ietf-mpls-tp-oam-framework.

The solution for the per-interface model is under discussion also in the 
per-interface MIP draft ( 
http://tools.ietf.org/html/draft-farrel-mpls-tp-mip-mep-map-04 ). If the 
on-demand-cv-06 covers the OAM solution for per-interface model, the 
discussion for on-demand CV and route tracing must be removed from the 
mip-mep-map draft. Otherwise, the mip-mep-map draft has to cover the 
solutions for on-demand CV and route tracing.

I also think that it is important to clarify the comments from Mr. 
Zhenlong Cui in the draft, whose email is attached at the bottom. It is 
important to make clear for what purpose the "IF_Num" is used. It also 
seems important to clarify the responder's behavior, because the 
ambiguity will definitely lead to interoperability issues.

Thank you in advance.

Best regards,

Yoshinori Koike

(2011/08/25 15:17), Zhenlong Cui wrote:
> Hi,
>
> I have sent some questions regarding the IF_Num of DSMAP TLV before. I'd like to make sure it is not lost.
>
>    2.1.  New address type for Downstream Mapping TLV
>     The new address type indicates that no address is present in the
>     DSMAP or DDMAP TLV.  However, IF_Num information (see definition of
>     "IF_NUM" in [I-D.ietf-mpls-tp-identifiers]) for both ingress and
>     egress interfaces, as well as multipath information is included in
>     the format and MAY be present.
>
>
> I believe the "IF_Num" can be used for per-interface MIP model.
> But I'm not sure why we need use both "ingress IF_Num" and "egress IF_Num" in a DSMAP TLV.
> I can't find this case (Ingress_IF::Egress_IF) in [I-D.ietf-mpls-tp-identifiers].
>
>   e.g.) the following are defined in [I-D.ietf-mpls-tp-identifiers] using "IF_Num", but there is no Ingress_IF::Egress_IF.
>   - "IF_ID"
>      IF_ID is a 64-bit identifier formed as Node_ID::IF_Num.
>   - "MIP ID"
>     For a MIP which is associated with particular interface, we simply
>     use the IF_ID (see Section 4) of the interfaces which are cross-
>     connected.
>
> If have any special means in the "IF_Num", I think MUST mention it clearly.
> Also I feeling that this draft have to clarify the responder's behavior for each IF information of the "IF_Num".
>
>
> Best regards,
> zhenlong
>
>
>> -----Original Message-----
>> From: mpls-bounces@ietf.org [mailto:mpls-bounces@ietf.org] On Behalf Of The IESG
>> Sent: Thursday, August 11, 2011 10:46 PM
>> To: IETF-Announce
>> Cc: mpls@ietf.org
>> Subject: [mpls] Last Call:<draft-ietf-mpls-tp-on-demand-cv-06.txt>  (MPLSOn-demand Connectivity Verification and Route
>> Tracing) toProposed Standard
>>
>>
>> The IESG has received a request from the Multiprotocol Label Switching WG
>> (mpls) to consider the following document:
>> - 'MPLS On-demand Connectivity Verification and Route Tracing'
>>    <draft-ietf-mpls-tp-on-demand-cv-06.txt>  as a Proposed Standard
>>
>> The IESG plans to make a decision in the next few weeks, and solicits
>> final comments on this action. Please send substantive comments to the
>> ietf@ietf.org mailing lists by 2011-08-25. Exceptionally, comments may be
>> sent to iesg@ietf.org instead. In either case, please retain the
>> beginning of the Subject line to allow automated sorting.
>>
>> Abstract
>>
>>     Label Switched Path Ping (LSP-Ping) is an existing and widely
>>     deployed Operations, Administration and Maintenance (OAM) mechanism
>>     for Multi-Protocol Label Switching (MPLS) Label Switched Paths
>>     (LSPs).  This document describes extensions to LSP-Ping so that LSP-
>>     Ping can be used for On-demand Connectivity Verification of MPLS
>>     Transport Profile (MPLS-TP) LSPs and Pseudowires.  This document also
>>     clarifies procedures to be used for processing the related OAM
>>     packets.  Further, it describes procedures for using LSP-Ping to
>>     perform Connectivity Verification and Route Tracing functions in
>>     MPLS-TP networks.  Finally this document updates RFC 4379 by adding a
>>     new address type and requesting an IANA registry.
>>
>>
>> The file can be obtained via
>> http://datatracker.ietf.org/doc/draft-ietf-mpls-tp-on-demand-cv/
>>
>> IESG discussion can be tracked via
>> http://datatracker.ietf.org/doc/draft-ietf-mpls-tp-on-demand-cv/
>>
>>
>> No IPR declarations have been submitted directly on this I-D.
>> _______________________________________________
>> mpls mailing list
>> mpls@ietf.org
>> https://www.ietf.org/mailman/listinfo/mpls
>
> _______________________________________________
> mpls mailing list
> mpls@ietf.org
> https://www.ietf.org/mailman/listinfo/mpls
>


--
_______________________________________________
mpls mailing list
mpls@ietf.org
https://www.ietf.org/mailman/listinfo/mpls
_______________________________________________
IETF-Announce mailing list
IETF-Announce@ietf.org
https://www.ietf.org/mailman/listinfo/ietf-announce


[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux