The IESG has received a request from the Softwires WG (softwire) to consider the following document: - 'RADIUS Extensions for Dual-Stack Lite' <draft-ietf-softwire-dslite-radius-ext-02.txt> as a Proposed Standard The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the ietf@ietf.org mailing lists by 2011-07-15. Exceptionally, comments may be sent to iesg@ietf.org instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract Dual-Stack Lite is a solution to offer both IPv4 and IPv6 connectivity to customers which are addressed only with an IPv6 prefix. DS-Lite requires to pre-configure the AFTR tunnel information on the B4 element. In many networks, the customer profile information may be stored in AAA servers while client configurations are mainly provided through DHC protocol. This document specifies one new RADIUS attribute to carry Dual-Stack Lite Address Family Transition Router (AFTR) name; the RADIUS attribute is defined based on the equivalent DHCPv6 option already specified in draft-ietf-softwire-ds-lite-tunnel-option. This RADIUS attribute is meant to be used between the RADIUS Server and the NAS, it is not intended to be used directly between the B4 element and the RADIUS Server. The file can be obtained via http://datatracker.ietf.org/doc/draft-ietf-softwire-dslite-radius-ext/ IESG discussion can be tracked via http://datatracker.ietf.org/doc/draft-ietf-softwire-dslite-radius-ext/ No IPR declarations have been submitted directly on this I-D. _______________________________________________ IETF-Announce mailing list IETF-Announce@ietf.org https://www.ietf.org/mailman/listinfo/ietf-announce
